spi/s3c64xx: Put the /CS GPIO into output mode

No call was being made by the GPIO driver to put the GPIO into output
mode meaning that the calls to gpio_set_value() which were being done
were not valid. A similar issue appears to exist with the DT GPIO
requests but as they appear to be being used for pinmux it's less clear
to me that we want to configure them.

Without this fix Cragganmore systems can't talk to their SPI devices.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 0bec10b7e6c0e96d03c7d90a161277a02ffa30a9..9d103163681e16a3254eb67b7ed00707988b9b79 100644 (file)
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -894,7 +894,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
        }
 
        if (!spi_get_ctldata(spi)) {
-               err = gpio_request(cs->line, dev_name(&spi->dev));
+               err = gpio_request_one(cs->line, GPIOF_OUT_INIT_HIGH,
+                                      dev_name(&spi->dev));
                if (err) {
                        dev_err(&spi->dev,
                                "Failed to get /CS gpio [%d]: %d\n",