b43: LP-PHY: Initialize TX power control
authorGábor Stefanik <netrolller.3d@gmail.com>
Thu, 13 Aug 2009 15:27:31 +0000 (17:27 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Thu, 20 Aug 2009 15:33:08 +0000 (11:33 -0400)
The HW TX power control init still needs work.
The SW init is complete according to the specs.

Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/b43/phy_lp.c
drivers/net/wireless/b43/phy_lp.h

index cfb8337d3859edcc06a8656491874be6f2da8e76..996b7eccfaf876d1666d6f73d7efb820e64dde47 100644 (file)
@@ -1257,18 +1257,109 @@ static void lpphy_calibration(struct b43_wldev *dev)
        b43_mac_enable(dev);
 }
 
+static void lpphy_set_tssi_mux(struct b43_wldev *dev, enum tssi_mux_mode mode)
+{
+       if (mode != TSSI_MUX_EXT) {
+               b43_radio_set(dev, B2063_PA_SP1, 0x2);
+               b43_phy_set(dev, B43_PHY_OFDM(0xF3), 0x1000);
+               b43_radio_write(dev, B2063_PA_CTL10, 0x51);
+               if (mode == TSSI_MUX_POSTPA) {
+                       b43_radio_mask(dev, B2063_PA_SP1, 0xFFFE);
+                       b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xFFC7);
+               } else {
+                       b43_radio_maskset(dev, B2063_PA_SP1, 0xFFFE, 0x1);
+                       b43_phy_maskset(dev, B43_LPPHY_AFE_CTL_OVRVAL,
+                                       0xFFC7, 0x20);
+               }
+       } else {
+               B43_WARN_ON(1);
+       }
+}
+
+static void lpphy_tx_pctl_init_hw(struct b43_wldev *dev)
+{
+       u16 tmp;
+       int i;
+
+       //SPEC TODO Call LP PHY Clear TX Power offsets
+       for (i = 0; i < 64; i++) {
+               if (dev->phy.rev >= 2)
+                       b43_lptab_write(dev, B43_LPTAB32(7, i + 1), i);
+               else
+                       b43_lptab_write(dev, B43_LPTAB32(10, i + 1), i);
+       }
+
+       b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM, 0xFF00, 0xFF);
+       b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM, 0x8FFF, 0x5000);
+       b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_IDLETSSI, 0xFFC0, 0x1F);
+       if (dev->phy.rev < 2) {
+               b43_phy_mask(dev, B43_LPPHY_LP_PHY_CTL, 0xEFFF);
+               b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xDFFF, 0x2000);
+       } else {
+               b43_phy_mask(dev, B43_PHY_OFDM(0x103), 0xFFFE);
+               b43_phy_maskset(dev, B43_PHY_OFDM(0x103), 0xFFFB, 0x4);
+               b43_phy_maskset(dev, B43_PHY_OFDM(0x103), 0xFFEF, 0x10);
+               b43_radio_maskset(dev, B2063_IQ_CALIB_CTL2, 0xF3, 0x1);
+               lpphy_set_tssi_mux(dev, TSSI_MUX_POSTPA);
+       }
+       b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_IDLETSSI, 0x7FFF, 0x8000);
+       b43_phy_mask(dev, B43_LPPHY_TX_PWR_CTL_DELTAPWR_LIMIT, 0xFF);
+       b43_phy_write(dev, B43_LPPHY_TX_PWR_CTL_DELTAPWR_LIMIT, 0xA);
+       b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
+                       (u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE,
+                       B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF);
+       b43_phy_mask(dev, B43_LPPHY_TX_PWR_CTL_NNUM, 0xF8FF);
+       b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
+                       (u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE,
+                       B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW);
+
+       if (dev->phy.rev < 2) {
+               b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_0, 0xEFFF, 0x1000);
+               b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xEFFF);
+       } else {
+               lpphy_set_tx_power_by_index(dev, 0x7F);
+       }
+
+       b43_dummy_transmission(dev, true, true);
+
+       tmp = b43_phy_read(dev, B43_LPPHY_TX_PWR_CTL_STAT);
+       if (tmp & 0x8000) {
+               b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_IDLETSSI,
+                               0xFFC0, (tmp & 0xFF) - 32);
+       }
+
+       b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xEFFF);
+
+       // (SPEC?) TODO Set "Target TX frequency" variable to 0
+       // SPEC FIXME "Set BB Multiplier to 0xE000" impossible - bb_mult is u8!
+}
+
+static void lpphy_tx_pctl_init_sw(struct b43_wldev *dev)
+{
+       struct lpphy_tx_gains gains;
+
+       if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+               gains.gm = 4;
+               gains.pad = 12;
+               gains.pga = 12;
+               gains.dac = 0;
+       } else {
+               gains.gm = 7;
+               gains.pad = 14;
+               gains.pga = 15;
+               gains.dac = 0;
+       }
+       lpphy_set_tx_gains(dev, gains);
+       lpphy_set_bb_mult(dev, 150);
+}
+
 /* Initialize TX power control */
 static void lpphy_tx_pctl_init(struct b43_wldev *dev)
 {
        if (0/*FIXME HWPCTL capable */) {
-               //TODO
+               lpphy_tx_pctl_init_hw(dev);
        } else { /* This device is only software TX power control capable. */
-               if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
-                       //TODO
-               } else {
-                       //TODO
-               }
-               //TODO set BB multiplier to 0x0096
+               lpphy_tx_pctl_init_sw(dev);
        }
 }
 
index 0461d5b3144f73617a25c99056796f394af015dc..4eab760ac6198427ef0deccfa717ebb2c5b30dae 100644 (file)
@@ -886,6 +886,11 @@ struct b43_phy_lp {
        u16 dig_flt_state[9];
 };
 
+enum tssi_mux_mode {
+       TSSI_MUX_PREPA,
+       TSSI_MUX_POSTPA,
+       TSSI_MUX_EXT,
+};
 
 struct b43_phy_operations;
 extern const struct b43_phy_operations b43_phyops_lp;