unicore32 machine related files: pci bus handling
authorGuanXuetao <gxt@mprc.pku.edu.cn>
Sat, 15 Jan 2011 10:25:14 +0000 (18:25 +0800)
committerGuanXuetao <gxt@mprc.pku.edu.cn>
Thu, 17 Mar 2011 01:19:15 +0000 (09:19 +0800)
This patch implements arch-specific pci bus driver.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
arch/unicore32/include/asm/pci.h [new file with mode: 0644]
arch/unicore32/kernel/pci.c [new file with mode: 0644]
drivers/pci/Makefile

diff --git a/arch/unicore32/include/asm/pci.h b/arch/unicore32/include/asm/pci.h
new file mode 100644 (file)
index 0000000..c5b28b4
--- /dev/null
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/unicore32/include/asm/pci.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PCI_H__
+#define __UNICORE_PCI_H__
+
+#ifdef __KERNEL__
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci.h>
+#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+       /* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+       /* We don't do dynamic PCI IRQ allocation */
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+                                       enum pci_dma_burst_strategy *strat,
+                                       unsigned long *strategy_parameter)
+{
+       *strat = PCI_DMA_BURST_INFINITY;
+       *strategy_parameter = ~0UL;
+}
+#endif
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+       enum pci_mmap_state mmap_state, int write_combine);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
new file mode 100644 (file)
index 0000000..d4e55e2
--- /dev/null
@@ -0,0 +1,404 @@
+/*
+ * linux/arch/unicore32/kernel/pci.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  PCI bios-type initialisation for PCI machines
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+static int debug_pci;
+static int use_firmware;
+
+#define CONFIG_CMD(bus, devfn, where)  \
+       (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+static int
+puv3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+                       int size, u32 *value)
+{
+       PCICFG_ADDR = CONFIG_CMD(bus, devfn, where);
+       switch (size) {
+       case 1:
+               *value = (PCICFG_DATA >> ((where & 3) * 8)) & 0xFF;
+               break;
+       case 2:
+               *value = (PCICFG_DATA >> ((where & 2) * 8)) & 0xFFFF;
+               break;
+       case 4:
+               *value = PCICFG_DATA;
+               break;
+       }
+       return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+puv3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+                       int size, u32 value)
+{
+       PCICFG_ADDR = CONFIG_CMD(bus, devfn, where);
+       switch (size) {
+       case 1:
+               PCICFG_DATA = (PCICFG_DATA & ~FMASK(8, (where&3)*8))
+                       | FIELD(value, 8, (where&3)*8);
+               break;
+       case 2:
+               PCICFG_DATA = (PCICFG_DATA & ~FMASK(16, (where&2)*8))
+                       | FIELD(value, 16, (where&2)*8);
+               break;
+       case 4:
+               PCICFG_DATA = value;
+               break;
+       }
+       return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops pci_puv3_ops = {
+       .read  = puv3_read_config,
+       .write = puv3_write_config,
+};
+
+void pci_puv3_preinit(void)
+{
+       printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n");
+       /* config PCI bridge base */
+       PCICFG_BRIBASE = PKUNITY_PCIBRI_BASE;
+
+       PCIBRI_AHBCTL0 = 0;
+       PCIBRI_AHBBAR0 = PKUNITY_PCIBRI_BASE | PCIBRI_BARx_MEM;
+       PCIBRI_AHBAMR0 = 0xFFFF0000;
+       PCIBRI_AHBTAR0 = 0;
+
+       PCIBRI_AHBCTL1 = PCIBRI_CTLx_AT;
+       PCIBRI_AHBBAR1 = PKUNITY_PCILIO_BASE | PCIBRI_BARx_IO;
+       PCIBRI_AHBAMR1 = 0xFFFF0000;
+       PCIBRI_AHBTAR1 = 0x00000000;
+
+       PCIBRI_AHBCTL2 = PCIBRI_CTLx_PREF;
+       PCIBRI_AHBBAR2 = PKUNITY_PCIMEM_BASE | PCIBRI_BARx_MEM;
+       PCIBRI_AHBAMR2 = 0xF8000000;
+       PCIBRI_AHBTAR2 = 0;
+
+       PCIBRI_BAR1 = PKUNITY_PCIAHB_BASE | PCIBRI_BARx_MEM;
+
+       PCIBRI_PCICTL0 = PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF;
+       PCIBRI_PCIBAR0 = PKUNITY_PCIAHB_BASE | PCIBRI_BARx_MEM;
+       PCIBRI_PCIAMR0 = 0xF8000000;
+       PCIBRI_PCITAR0 = PKUNITY_SDRAM_BASE;
+
+       PCIBRI_CMD = PCIBRI_CMD | PCIBRI_CMD_IO | PCIBRI_CMD_MEM;
+}
+
+static int __init pci_puv3_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+       if (dev->bus->number == 0) {
+#ifdef CONFIG_ARCH_FPGA /* 4 pci slots */
+               if      (dev->devfn == 0x00)
+                       return IRQ_PCIINTA;
+               else if (dev->devfn == 0x08)
+                       return IRQ_PCIINTB;
+               else if (dev->devfn == 0x10)
+                       return IRQ_PCIINTC;
+               else if (dev->devfn == 0x18)
+                       return IRQ_PCIINTD;
+#endif
+#ifdef CONFIG_PUV3_DB0913 /* 3 pci slots */
+               if      (dev->devfn == 0x30)
+                       return IRQ_PCIINTB;
+               else if (dev->devfn == 0x60)
+                       return IRQ_PCIINTC;
+               else if (dev->devfn == 0x58)
+                       return IRQ_PCIINTD;
+#endif
+#if    defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)
+               /* only support 2 pci devices */
+               if      (dev->devfn == 0x00)
+                       return IRQ_PCIINTC; /* sata */
+#endif
+       }
+       return -1;
+}
+
+/*
+ * Only first 128MB of memory can be accessed via PCI.
+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
+ * This is really ugly and we need a better way of specifying
+ * DMA-capable regions of memory.
+ */
+void __init puv3_pci_adjust_zones(unsigned long *zone_size,
+       unsigned long *zhole_size)
+{
+       unsigned int sz = SZ_128M >> PAGE_SHIFT;
+
+       /*
+        * Only adjust if > 128M on current system
+        */
+       if (zone_size[0] <= sz)
+               return;
+
+       zone_size[1] = zone_size[0] - sz;
+       zone_size[0] = sz;
+       zhole_size[1] = zhole_size[0];
+       zhole_size[0] = 0;
+}
+
+void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+       if (debug_pci)
+               printk(KERN_DEBUG "PCI: Assigning IRQ %02d to %s\n",
+                               irq, pci_name(dev));
+       pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/*
+ * If the bus contains any of these devices, then we must not turn on
+ * parity checking of any kind.
+ */
+static inline int pdev_bad_for_parity(struct pci_dev *dev)
+{
+       return 0;
+}
+
+/*
+ * pcibios_fixup_bus - Called after each bus is probed,
+ * but before its children are examined.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+       struct pci_dev *dev;
+       u16 features = PCI_COMMAND_SERR
+               | PCI_COMMAND_PARITY
+               | PCI_COMMAND_FAST_BACK;
+
+       bus->resource[0] = &ioport_resource;
+       bus->resource[1] = &iomem_resource;
+
+       /*
+        * Walk the devices on this bus, working out what we can
+        * and can't support.
+        */
+       list_for_each_entry(dev, &bus->devices, bus_list) {
+               u16 status;
+
+               pci_read_config_word(dev, PCI_STATUS, &status);
+
+               /*
+                * If any device on this bus does not support fast back
+                * to back transfers, then the bus as a whole is not able
+                * to support them.  Having fast back to back transfers
+                * on saves us one PCI cycle per transaction.
+                */
+               if (!(status & PCI_STATUS_FAST_BACK))
+                       features &= ~PCI_COMMAND_FAST_BACK;
+
+               if (pdev_bad_for_parity(dev))
+                       features &= ~(PCI_COMMAND_SERR
+                                       | PCI_COMMAND_PARITY);
+
+               switch (dev->class >> 8) {
+               case PCI_CLASS_BRIDGE_PCI:
+                       pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
+                       status |= PCI_BRIDGE_CTL_PARITY
+                               | PCI_BRIDGE_CTL_MASTER_ABORT;
+                       status &= ~(PCI_BRIDGE_CTL_BUS_RESET
+                               | PCI_BRIDGE_CTL_FAST_BACK);
+                       pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
+                       break;
+
+               case PCI_CLASS_BRIDGE_CARDBUS:
+                       pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
+                                       &status);
+                       status |= PCI_CB_BRIDGE_CTL_PARITY
+                               | PCI_CB_BRIDGE_CTL_MASTER_ABORT;
+                       pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
+                                       status);
+                       break;
+               }
+       }
+
+       /*
+        * Now walk the devices again, this time setting them up.
+        */
+       list_for_each_entry(dev, &bus->devices, bus_list) {
+               u16 cmd;
+
+               pci_read_config_word(dev, PCI_COMMAND, &cmd);
+               cmd |= features;
+               pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+               pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+                                     L1_CACHE_BYTES >> 2);
+       }
+
+       /*
+        * Propagate the flags to the PCI bridge.
+        */
+       if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+               if (features & PCI_COMMAND_FAST_BACK)
+                       bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
+               if (features & PCI_COMMAND_PARITY)
+                       bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
+       }
+
+       /*
+        * Report what we did for this bus
+        */
+       printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
+               bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
+}
+#ifdef CONFIG_HOTPLUG
+EXPORT_SYMBOL(pcibios_fixup_bus);
+#endif
+
+static int __init pci_common_init(void)
+{
+       struct pci_bus *puv3_bus;
+
+       pci_puv3_preinit();
+
+       puv3_bus = pci_scan_bus(0, &pci_puv3_ops, NULL);
+
+       if (!puv3_bus)
+               panic("PCI: unable to scan bus!");
+
+       pci_fixup_irqs(pci_common_swizzle, pci_puv3_map_irq);
+
+       if (!use_firmware) {
+               /*
+                * Size the bridge windows.
+                */
+               pci_bus_size_bridges(puv3_bus);
+
+               /*
+                * Assign resources.
+                */
+               pci_bus_assign_resources(puv3_bus);
+       }
+
+       /*
+        * Tell drivers about devices found.
+        */
+       pci_bus_add_devices(puv3_bus);
+
+       return 0;
+}
+subsys_initcall(pci_common_init);
+
+char * __devinit pcibios_setup(char *str)
+{
+       if (!strcmp(str, "debug")) {
+               debug_pci = 1;
+               return NULL;
+       } else if (!strcmp(str, "firmware")) {
+               use_firmware = 1;
+               return NULL;
+       }
+       return str;
+}
+
+/*
+ * From arch/i386/kernel/pci-i386.c:
+ *
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+                               resource_size_t size, resource_size_t align)
+{
+       resource_size_t start = res->start;
+
+       if (res->flags & IORESOURCE_IO && start & 0x300)
+               start = (start + 0x3ff) & ~0x3ff;
+
+       start = (start + align - 1) & ~(align - 1);
+
+       return start;
+}
+
+/**
+ * pcibios_enable_device - Enable I/O and memory.
+ * @dev: PCI device to be enabled
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+       u16 cmd, old_cmd;
+       int idx;
+       struct resource *r;
+
+       pci_read_config_word(dev, PCI_COMMAND, &cmd);
+       old_cmd = cmd;
+       for (idx = 0; idx < 6; idx++) {
+               /* Only set up the requested stuff */
+               if (!(mask & (1 << idx)))
+                       continue;
+
+               r = dev->resource + idx;
+               if (!r->start && r->end) {
+                       printk(KERN_ERR "PCI: Device %s not available because"
+                              " of resource collisions\n", pci_name(dev));
+                       return -EINVAL;
+               }
+               if (r->flags & IORESOURCE_IO)
+                       cmd |= PCI_COMMAND_IO;
+               if (r->flags & IORESOURCE_MEM)
+                       cmd |= PCI_COMMAND_MEMORY;
+       }
+
+       /*
+        * Bridges (eg, cardbus bridges) need to be fully enabled
+        */
+       if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+               cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+
+       if (cmd != old_cmd) {
+               printk("PCI: enabling device %s (%04x -> %04x)\n",
+                      pci_name(dev), old_cmd, cmd);
+               pci_write_config_word(dev, PCI_COMMAND, cmd);
+       }
+       return 0;
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                       enum pci_mmap_state mmap_state, int write_combine)
+{
+       unsigned long phys;
+
+       if (mmap_state == pci_mmap_io)
+               return -EINVAL;
+
+       phys = vma->vm_pgoff;
+
+       /*
+        * Mark this as IO
+        */
+       vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+       if (remap_pfn_range(vma, vma->vm_start, phys,
+                            vma->vm_end - vma->vm_start,
+                            vma->vm_page_prot))
+               return -EAGAIN;
+
+       return 0;
+}
index 98e6fdf34d30d136290a794a6b2a62b0764fdf5b..77cf813ba2641a802f8cda3e0f22f02f72ea0de1 100644 (file)
@@ -42,6 +42,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o
 obj-$(CONFIG_X86) += setup-bus.o
 obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o
 obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
+obj-$(CONFIG_UNICORE32) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PARISC) += setup-bus.o
 obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PPC) += setup-bus.o