#define RX_READY 0x01
#define TX_READY 0x02
-#define CMD_ACK 0x80
-#define CMD_SET_MIDI_VOL 0x84
-#define CMD_GET_MIDI_VOL 0x85
-#define CMD_XXX_MIDI_VOL 0x86
-#define CMD_SET_EXTMIDI 0x8a
-#define CMD_GET_EXTMIDI 0x8b
-#define CMD_SET_MT32 0x8c
-#define CMD_GET_MT32 0x8d
+#define CMD_ACK 0x80
+#define CMD_SET_MIDI_VOL 0x84
+#define CMD_GET_MIDI_VOL 0x85
+#define CMD_XXX_MIDI_VOL 0x86
+#define CMD_SET_EXTMIDI 0x8a
+#define CMD_GET_EXTMIDI 0x8b
+#define CMD_SET_MT32 0x8c
+#define CMD_GET_MT32 0x8d
enum GA_REG {
GA_INTSTAT_REG = 0,
* I think this means that the memory has to map to
* contiguous pages of physical memory.
*/
-static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, unsigned long size)
+static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf,
+ unsigned long size)
{
if (buf) {
- if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, snd_dma_isa_data(),
+ if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV,
+ snd_dma_isa_data(),
size, buf) < 0) {
snd_printk(KERN_ERR "sscape: Failed to allocate "
"%lu bytes for DMA\n",
snd_dma_free_pages(buf);
}
-
/*
* This function writes to the SoundScape's control registers,
* but doesn't do any locking. It's up to the caller to do that.
* This is why this function is "unsafe" ...
*/
-static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsigned char val)
+static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg,
+ unsigned char val)
{
outb(reg, ODIE_ADDR_IO(io_base));
outb(val, ODIE_DATA_IO(io_base));
* Write to the SoundScape's control registers, and do the
* necessary locking ...
*/
-static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char val)
+static void sscape_write(struct soundscape *s, enum GA_REG reg,
+ unsigned char val)
{
unsigned long flags;
* Read from the SoundScape's control registers, but leave any
* locking to the caller. This is why the function is "unsafe" ...
*/
-static inline unsigned char sscape_read_unsafe(unsigned io_base, enum GA_REG reg)
+static inline unsigned char sscape_read_unsafe(unsigned io_base,
+ enum GA_REG reg)
{
outb(reg, ODIE_ADDR_IO(io_base));
return inb(ODIE_DATA_IO(io_base));
static inline int host_read_unsafe(unsigned io_base)
{
int data = -1;
- if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) {
+ if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0)
data = inb(HOST_DATA_IO(io_base));
- }
return data;
}
* Also leaves all locking-issues to the caller ...
*/
static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data,
- unsigned timeout)
+ unsigned timeout)
{
int err;
*
* NOTE: This check is based upon observation, not documentation.
*/
-static inline int verify_mpu401(const struct snd_mpu401 * mpu)
+static inline int verify_mpu401(const struct snd_mpu401 *mpu)
{
return ((inb(MPU401C(mpu)) & 0xc0) == 0x80);
}
/*
* This is apparently the standard way to initailise an MPU-401
*/
-static inline void initialise_mpu401(const struct snd_mpu401 * mpu)
+static inline void initialise_mpu401(const struct snd_mpu401 *mpu)
{
outb(0, MPU401D(mpu));
}
* The AD1845 detection fails if we *don't* do this, so I
* think that this is a good idea ...
*/
-static inline void activate_ad1845_unsafe(unsigned io_base)
+static void activate_ad1845_unsafe(unsigned io_base)
{
- sscape_write_unsafe(io_base, GA_HMCTL_REG, (sscape_read_unsafe(io_base, GA_HMCTL_REG) & 0xcf) | 0x10);
+ unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG);
+ sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10);
sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80);
}
* Tell the SoundScape to begin a DMA tranfer using the given channel.
* All locking issues are left to the caller.
*/
-static inline void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
+static void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
{
- sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) | 0x01);
- sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) & 0xfe);
+ sscape_write_unsafe(io_base, reg,
+ sscape_read_unsafe(io_base, reg) | 0x01);
+ sscape_write_unsafe(io_base, reg,
+ sscape_read_unsafe(io_base, reg) & 0xfe);
}
/*
* Wait for a DMA transfer to complete. This is a "limited busy-wait",
* and all locking issues are left to the caller.
*/
-static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned timeout)
+static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg,
+ unsigned timeout)
{
while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) {
udelay(100);
--timeout;
} /* while */
- return (sscape_read_unsafe(io_base, reg) & 0x01);
+ return sscape_read_unsafe(io_base, reg) & 0x01;
}
/*
/*
* Upload a byte-stream into the SoundScape using DMA channel A.
*/
-static int upload_dma_data(struct soundscape *s,
- const unsigned char *data,
- size_t size)
+static int upload_dma_data(struct soundscape *s, const unsigned char *data,
+ size_t size)
{
unsigned long flags;
struct snd_dma_buffer dma;
int ret;
+ unsigned char val;
if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024)))
return -ENOMEM;
/*
* Reset the board ...
*/
- sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f);
+ val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f);
/*
* Enable the DMA channels and configure them ...
*/
- sscape_write_unsafe(s->io_base, GA_DMAA_REG, (s->chip->dma1 << 4) | DMA_8BIT);
+ val = (s->chip->dma1 << 4) | DMA_8BIT;
+ sscape_write_unsafe(s->io_base, GA_DMAA_REG, val);
sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20);
/*
* Take the board out of reset ...
*/
- sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x80);
+ val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80);
/*
* Upload the firmware to the SoundScape
sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG);
if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) {
/*
- * Don't forget to release this spinlock we're holding ...
+ * Don't forget to release this spinlock we're holding
*/
spin_unlock_irqrestore(&s->lock, flags);
/*
* Boot the board ... (I think)
*/
- sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x40);
+ val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40);
spin_unlock_irqrestore(&s->lock, flags);
/*
* Mixer control for the SoundScape's MIDI device.
*/
static int sscape_midi_info(struct snd_kcontrol *ctl,
- struct snd_ctl_elem_info *uinfo)
+ struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 1;
}
static int sscape_midi_get(struct snd_kcontrol *kctl,
- struct snd_ctl_elem_value *uctl)
+ struct snd_ctl_elem_value *uctl)
{
struct snd_wss *chip = snd_kcontrol_chip(kctl);
struct snd_card *card = chip->card;
}
static int sscape_midi_put(struct snd_kcontrol *kctl,
- struct snd_ctl_elem_value *uctl)
+ struct snd_ctl_elem_value *uctl)
{
struct snd_wss *chip = snd_kcontrol_chip(kctl);
struct snd_card *card = chip->card;
- register struct soundscape *s = get_card_soundscape(card);
+ struct soundscape *s = get_card_soundscape(card);
unsigned long flags;
int change;
+ unsigned char new_val;
spin_lock_irqsave(&s->lock, flags);
+ new_val = uctl->value.integer.value[0] & 127;
/*
* We need to put the board into HOST mode before we
* can send any volume-changing HOST commands ...
* and then perform another volume-related command. Perhaps the
* first command is an "open" and the second command is a "close"?
*/
- if (s->midi_vol == ((unsigned char) uctl->value.integer. value[0] & 127)) {
+ if (s->midi_vol == new_val) {
change = 0;
goto __skip_change;
}
- change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
- && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100)
- && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100));
- s->midi_vol = (unsigned char) uctl->value.integer.value[0] & 127;
- __skip_change:
+ change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
+ && host_write_ctrl_unsafe(s->io_base, new_val, 100)
+ && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)
+ && host_write_ctrl_unsafe(s->io_base, new_val, 100);
+ s->midi_vol = new_val;
+__skip_change:
/*
* Take the board out of HOST mode and back into MIDI mode ...
if (s->type == SSCAPE_VIVO)
wss_io += 4;
- d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
+ d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
/* wait for WSS codec */
if ((inb(wss_io) & 0x80) != 0)
s->type = MEDIA_FX;
- d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
+ d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
/* wait for WSS codec */
for (d = 0; d < 500; d++) {
*/
retval = 1;
- _done:
+_done:
spin_unlock_irqrestore(&s->lock, flags);
return retval;
}
* to crash the machine. Also check that someone isn't using the hardware
* IOCTL device.
*/
-static int mpu401_open(struct snd_mpu401 * mpu)
+static int mpu401_open(struct snd_mpu401 *mpu)
{
if (!verify_mpu401(mpu)) {
snd_printk(KERN_ERR "sscape: MIDI disabled, "
/*
* Initialse an MPU-401 subdevice for MIDI support on the SoundScape.
*/
-static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned long port, int irq)
+static int __devinit create_mpu401(struct snd_card *card, int devnum,
+ unsigned long port, int irq)
{
struct soundscape *sscape = get_card_soundscape(card);
struct snd_rawmidi *rawmidi;
int err;
- if ((err = snd_mpu401_uart_new(card, devnum,
- MPU401_HW_MPU401,
- port, MPU401_INFO_INTEGRATED,
- irq, IRQF_DISABLED,
- &rawmidi)) == 0) {
- struct snd_mpu401 *mpu = (struct snd_mpu401 *) rawmidi->private_data;
+ err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
+ MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED,
+ &rawmidi);
+ if (err == 0) {
+ struct snd_mpu401 *mpu = rawmidi->private_data;
mpu->open_input = mpu401_open;
mpu->open_output = mpu401_open;
mpu->private_data = sscape;
unsigned long flags;
struct snd_pcm *pcm;
-/*
- * It turns out that the PLAYBACK_ENABLE bit is set
- * by the lowlevel driver ...
- *
-#define AD1845_IFACE_CONFIG \
- (CS4231_AUTOCALIB | CS4231_RECORD_ENABLE | CS4231_PLAYBACK_ENABLE)
- snd_wss_mce_up(chip);
- spin_lock_irqsave(&chip->reg_lock, flags);
- snd_wss_out(chip, CS4231_IFACE_CTRL, AD1845_IFACE_CONFIG);
- spin_unlock_irqrestore(&chip->reg_lock, flags);
- snd_wss_mce_down(chip);
- */
-
if (sscape->type != SSCAPE_VIVO) {
/*
* The input clock frequency on the SoundScape must
sscape->chip = chip;
}
- _error:
+_error:
return err;
}
*/
spin_lock_irqsave(&sscape->lock, flags);
- sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x00); /* disable */
sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e);
sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00);
sscape_write_unsafe(sscape->io_base,
GA_CDCFG_REG, 0x09 | DMA_8BIT
| (dma[dev] << 4) | (irq_cfg << 1));
+ /*
+ * Enable the master IRQ ...
+ */
+ sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80);
spin_unlock_irqrestore(&sscape->lock, flags);
goto _release_dma;
}
- /*
- * Enable the master IRQ ...
- */
- sscape_write(sscape, GA_INTENA_REG, 0x80);
-
/*
* Initialize mixer
*/
mpu_irq[i] == SNDRV_AUTO_IRQ ||
dma[i] == SNDRV_AUTO_DMA) {
printk(KERN_INFO
- "sscape: insufficient parameters, need IO, IRQ, MPU-IRQ and DMA\n");
+ "sscape: insufficient parameters, "
+ "need IO, IRQ, MPU-IRQ and DMA\n");
return 0;
}
if (ret < 0)
goto _release_card;
- if ((ret = snd_card_register(card)) < 0) {
+ ret = snd_card_register(card);
+ if (ret < 0) {
snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
goto _release_card;
}
* Allow this function to fail *quietly* if all the ISA PnP
* devices were configured using module parameters instead.
*/
- if ((idx = get_next_autoindex(idx)) >= SNDRV_CARDS)
+ idx = get_next_autoindex(idx);
+ if (idx >= SNDRV_CARDS)
return -ENOSPC;
- /*
- * We have found a candidate ISA PnP card. Now we
- * have to check that it has the devices that we
- * expect it to have.
- */
-
/*
* Check that we still have room for another sound card ...
*/
dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL);
- if (! dev)
+ if (!dev)
return -ENODEV;
if (!pnp_is_active(dev)) {
if (ret < 0)
goto _release_card;
- if ((ret = snd_card_register(card)) < 0) {
+ ret = snd_card_register(card);
+ if (ret < 0) {
snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
goto _release_card;
}
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff