#define SDR0_UART3 0x0123
#define SDR0_CUST0 0x4000
+/* SDRs (460EX/460GT) */
+#define SDR0_ETH_CFG 0x4103
+#define SDR0_ETH_CFG_ECS 0x00000100 /* EMAC int clk source */
+
/*
* All those DCR register addresses are offsets from the base address
* for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
const char *error)
{
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX |
+ EMAC_FTR_460EX_PHY_CLK_FIX |
EMAC_FTR_440EP_PHY_CLK_FIX))
DBG(dev, "%s" NL, error);
else if (net_ratelimit())
emac_tx_disable(dev);
}
+#ifdef CONFIG_PPC_DCR_NATIVE
+ /* Enable internal clock source */
+ if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_ETH_CFG,
+ 0, SDR0_ETH_CFG_ECS << dev->cell_index);
+#endif
+
out_be32(&p->mr0, EMAC_MR0_SRST);
while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n)
--n;
+#ifdef CONFIG_PPC_DCR_NATIVE
+ /* Enable external clock source */
+ if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_ETH_CFG,
+ SDR0_ETH_CFG_ECS << dev->cell_index, 0);
+#endif
+
if (n) {
dev->reset_failed = 0;
return 0;
/* Check EMAC version */
if (of_device_is_compatible(np, "ibm,emac4sync")) {
dev->features |= (EMAC_FTR_EMAC4 | EMAC_FTR_EMAC4SYNC);
+ if (of_device_is_compatible(np, "ibm,emac-460ex") ||
+ of_device_is_compatible(np, "ibm,emac-460gt"))
+ dev->features |= EMAC_FTR_460EX_PHY_CLK_FIX;
} else if (of_device_is_compatible(np, "ibm,emac4")) {
dev->features |= EMAC_FTR_EMAC4;
if (of_device_is_compatible(np, "ibm,emac-440gx"))
* The 405EX and 460EX contain the EMAC4SYNC core
*/
#define EMAC_FTR_EMAC4SYNC 0x00000200
+/*
+ * Set if we need phy clock workaround for 460ex or 460gt
+ */
+#define EMAC_FTR_460EX_PHY_CLK_FIX 0x00000400
/* Right now, we don't quite handle the always/possible masks on the
#ifdef CONFIG_IBM_NEW_EMAC_RGMII
EMAC_FTR_HAS_RGMII |
#endif
+ EMAC_FTR_460EX_PHY_CLK_FIX |
EMAC_FTR_440EP_PHY_CLK_FIX,
};