exynos_map_io();
}
+/*
+ * Set or clear the USE_DELAYED_RESET_ASSERTION option. Used by smp code
+ * and suspend.
+ *
+ * This is necessary only on Exynos4 SoCs. When system is running
+ * USE_DELAYED_RESET_ASSERTION should be set so the ARM CLK clock down
+ * feature could properly detect global idle state when secondary CPU is
+ * powered down.
+ *
+ * However this should not be set when such system is going into suspend.
+ */
+void exynos_set_delayed_reset_assertion(bool enable)
+{
+ if (soc_is_exynos4()) {
+ unsigned int tmp, core_id;
+
+ for (core_id = 0; core_id < num_possible_cpus(); core_id++) {
+ tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
+ if (enable)
+ tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
+ else
+ tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
+ pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
+ }
+ }
+}
+
/*
* Apparently, these SoCs are not able to wake-up from suspend using
* the PMU. Too bad. Should they suddenly become capable of such a
extern void exynos4_secondary_startup(void);
-/*
- * Set or clear the USE_DELAYED_RESET_ASSERTION option, set on Exynos4 SoCs
- * during hot-(un)plugging CPUx.
- *
- * The feature can be cleared safely during first boot of secondary CPU.
- *
- * Exynos4 SoCs require setting USE_DELAYED_RESET_ASSERTION during powering
- * down a CPU so the CPU idle clock down feature could properly detect global
- * idle state when CPUx is off.
- */
-static void exynos_set_delayed_reset_assertion(u32 core_id, bool enable)
-{
- if (soc_is_exynos4()) {
- unsigned int tmp;
-
- tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
- if (enable)
- tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
- else
- tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
- pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
- }
-}
-
#ifdef CONFIG_HOTPLUG_CPU
static inline void cpu_leave_lowpower(u32 core_id)
{
: "=&r" (v)
: "Ir" (CR_C), "Ir" (0x40)
: "cc");
-
- exynos_set_delayed_reset_assertion(core_id, false);
}
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
/* Turn the CPU off on next WFI instruction. */
exynos_cpu_power_down(core_id);
- /*
- * Exynos4 SoCs require setting
- * USE_DELAYED_RESET_ASSERTION so the CPU idle
- * clock down feature could properly detect
- * global idle state when CPUx is off.
- */
- exynos_set_delayed_reset_assertion(core_id, true);
-
wfi();
if (pen_release == core_id) {
udelay(10);
}
- /* No harm if this is called during first boot of secondary CPU */
- exynos_set_delayed_reset_assertion(core_id, false);
-
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
exynos_sysram_init();
+ exynos_set_delayed_reset_assertion(true);
+
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
scu_enable(scu_base_addr());
static void exynos_pm_prepare(void)
{
+ exynos_set_delayed_reset_assertion(false);
+
/* Set wake-up mask registers */
exynos_pm_set_wakeup_mask();
/* Clear SLEEP mode set in INFORM1 */
pmu_raw_writel(0x0, S5P_INFORM1);
+ exynos_set_delayed_reset_assertion(true);
}
static void exynos3250_pm_resume(void)