[media] dib8000: add DVBv5 stats
authorMauro Carvalho Chehab <m.chehab@samsung.com>
Mon, 16 Dec 2013 22:10:59 +0000 (19:10 -0300)
committerMauro Carvalho Chehab <m.chehab@samsung.com>
Thu, 19 Dec 2013 10:17:45 +0000 (08:17 -0200)
The advantage of DVBv5 stats is that it allows adding proper
scales to all measures. use it for this frontend.

This patch adds a basic set of stats, basically cloning what's already
provided by DVBv3 API. Latter patches will improve it.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Patrick Boettcher <pboettcher@kernellabs.com>
drivers/media/dvb-frontends/dib8000.c

index 13fdc3d5f762c693d50dbf4c36125cedee94501a..2dbf89365a97a4b39d6f883e8b1e238f2621a907 100644 (file)
@@ -124,6 +124,8 @@ struct dib8000_state {
        u16 agc2_max;
        u16 agc2_min;
 #endif
+
+       unsigned long get_stats_time;
 };
 
 enum dib8000_power_mode {
@@ -804,7 +806,7 @@ int dib8000_update_pll(struct dvb_frontend *fe,
                        dprintk("PLL: Update ratio (prediv: %d, ratio: %d)", state->cfg.pll->pll_prediv, ratio);
                        dib8000_write_word(state, 901, (state->cfg.pll->pll_prediv << 8) | (ratio << 0)); /* only the PLL ratio is updated. */
                }
-}
+       }
 
        return 0;
 }
@@ -983,6 +985,32 @@ static u16 dib8000_identify(struct i2c_device *client)
        return value;
 }
 
+static void dib8000_reset_stats(struct dvb_frontend *fe)
+{
+       struct dib8000_state *state = fe->demodulator_priv;
+       struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache;
+
+       memset(&c->strength, 0, sizeof(c->strength));
+       memset(&c->cnr, 0, sizeof(c->cnr));
+       memset(&c->post_bit_error, 0, sizeof(c->post_bit_error));
+       memset(&c->post_bit_count, 0, sizeof(c->post_bit_count));
+       memset(&c->block_error, 0, sizeof(c->block_error));
+
+       c->strength.len = 1;
+       c->cnr.len = 1;
+       c->block_error.len = 1;
+       c->post_bit_error.len = 1;
+       c->post_bit_count.len = 1;
+
+       c->strength.stat[0].scale = FE_SCALE_RELATIVE;
+       c->strength.stat[0].uvalue = 0;
+
+       c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+       c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+       c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+       c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+}
+
 static int dib8000_reset(struct dvb_frontend *fe)
 {
        struct dib8000_state *state = fe->demodulator_priv;
@@ -1088,6 +1116,8 @@ static int dib8000_reset(struct dvb_frontend *fe)
 
        dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY);
 
+       dib8000_reset_stats(fe);
+
        return 0;
 }
 
@@ -2983,6 +3013,8 @@ static int dib8000_tune(struct dvb_frontend *fe)
 
        switch (*tune_state) {
        case CT_DEMOD_START: /* 30 */
+                       dib8000_reset_stats(fe);
+
                        if (state->revision == 0x8090)
                                dib8090p_init_sdram(state);
                        state->status = FE_STATUS_TUNE_PENDING;
@@ -3654,6 +3686,8 @@ static int dib8000_set_frontend(struct dvb_frontend *fe)
        return 0;
 }
 
+static int dib8000_get_stats(struct dvb_frontend *fe, fe_status_t stat);
+
 static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat)
 {
        struct dib8000_state *state = fe->demodulator_priv;
@@ -3691,6 +3725,7 @@ static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat)
                if (lock & 0x01)
                        *stat |= FE_HAS_VITERBI;
        }
+       dib8000_get_stats(fe, *stat);
 
        return 0;
 }
@@ -3797,6 +3832,111 @@ static int dib8000_read_snr(struct dvb_frontend *fe, u16 * snr)
        return 0;
 }
 
+struct per_layer_regs {
+       u16 lock, ber, per;
+};
+
+static const struct per_layer_regs per_layer_regs[] = {
+       { 554, 560, 562 },
+       { 555, 576, 578 },
+       { 556, 581, 583 },
+};
+
+static int dib8000_get_stats(struct dvb_frontend *fe, fe_status_t stat)
+{
+       struct dib8000_state *state = fe->demodulator_priv;
+       struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache;
+       int i, lock;
+       u32 snr, val;
+       u16 strength;
+
+       /* Get Signal strength */
+       dib8000_read_signal_strength(fe, &strength);
+       c->strength.stat[0].uvalue = strength;
+
+       /* Check if 1 second was elapsed */
+       if (!time_after(jiffies, state->get_stats_time))
+               return 0;
+       state->get_stats_time = jiffies + msecs_to_jiffies(1000);
+
+       /* Get SNR */
+       snr = dib8000_get_snr(fe);
+       for (i = 1; i < MAX_NUMBER_OF_FRONTENDS; i++) {
+               if (state->fe[i])
+                       snr += dib8000_get_snr(state->fe[i]);
+       }
+       snr = snr >> 16;
+
+       if (snr) {
+               snr = 10 * intlog10(snr);
+               snr = (1000L * snr) >> 24;
+       } else {
+               snr = 0;
+       }
+       c->cnr.stat[0].svalue = snr;
+       c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
+
+       /* UCB/BER measures require lock */
+       if (!(stat & FE_HAS_LOCK)) {
+               c->block_error.len = 1;
+               c->post_bit_error.len = 1;
+               c->post_bit_count.len = 1;
+               c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+               c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+               c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+               return 0;
+       }
+
+       /* Get UCB and post-BER measures */
+
+       /* FIXME: need to check if 1.25e6 bits already passed */
+       dib8000_read_ber(fe, &val);
+       c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+       c->post_bit_error.stat[0].uvalue += val;
+
+       c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+       c->post_bit_count.stat[0].uvalue += 100000000;
+
+       /*
+        * FIXME: this is refreshed on every second, but a time
+        * drift between dib8000 and PC clock may cause troubles
+        */
+       dib8000_read_unc_blocks(fe, &val);
+
+       c->block_error.stat[0].scale = FE_SCALE_COUNTER;
+       c->block_error.stat[0].uvalue += val;
+
+       if (state->revision < 0x8002)
+               return 0;
+
+       c->block_error.len = 4;
+       c->post_bit_error.len = 4;
+       c->post_bit_count.len = 4;
+
+       for (i = 0; i < 3; i++) {
+               lock = dib8000_read_word(state, per_layer_regs[i].lock);
+               if (lock & 0x01) {
+                       /* FIXME: need to check if 1.25e6 bits already passed */
+                       val = dib8000_read_word(state, per_layer_regs[i].ber);
+                       c->post_bit_error.stat[1 + i].scale = FE_SCALE_COUNTER;
+                       c->post_bit_error.stat[1 + i].uvalue += val;
+
+                       c->post_bit_count.stat[1 + i].scale = FE_SCALE_COUNTER;
+                       c->post_bit_count.stat[1 + i].uvalue += 100000000;
+
+                       /*
+                        * FIXME: this is refreshed on every second, but a time
+                        * drift between dib8000 and PC clock may cause troubles
+                        */
+                       val = dib8000_read_word(state, per_layer_regs[i].per);
+
+                       c->block_error.stat[1 + i].scale = FE_SCALE_COUNTER;
+                       c->block_error.stat[1 + i].uvalue += val;
+               }
+       }
+       return 0;
+}
+
 int dib8000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave)
 {
        struct dib8000_state *state = fe->demodulator_priv;