ARM: dts: Add support for dra718-evm
authorNishanth Menon <nm@ti.com>
Fri, 21 Oct 2016 10:38:39 +0000 (16:08 +0530)
committerTony Lindgren <tony@atomide.com>
Wed, 9 Nov 2016 23:02:12 +0000 (16:02 -0700)
The DRA718-evm is a board based on TI's DRA718 processor targeting
BOM-optimized entry infotainment systems and is a reduced pin and
software compatible derivative of the DRA72 ES2.0 processor.
This platform features:
- 2GB of DDR3L
- Dual 1Gbps Ethernet
- HDMI,
- uSD
- 8GB eMMC
- CAN
- PCIe
- USB3.0
- Video Input Port
- LP873x PMIC

More information can be found here[1].

Adding support for this board while reusing the data available in
dra72-evm-common.dtsi.

[1] http://www.ti.com/product/dra718

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/dra71-evm.dts [new file with mode: 0644]
arch/arm/boot/dts/dra72-evm-common.dtsi

index befcd26199021e4bf61f5e90a508ebdda16e347b..b92d5016bf00388231765297b70f45386137aeef 100644 (file)
@@ -590,7 +590,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
        am572x-idk.dtb \
        dra7-evm.dtb \
        dra72-evm.dtb \
-       dra72-evm-revc.dtb
+       dra72-evm-revc.dtb \
+       dra71-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += \
        orion5x-kuroboxpro.dtb \
        orion5x-lacie-d2-network.dtb \
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
new file mode 100644 (file)
index 0000000..2b9a5a8
--- /dev/null
@@ -0,0 +1,230 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra72-evm-common.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+       compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
+       model = "TI DRA718 EVM";
+
+       memory {
+               device_type = "memory";
+               reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+       };
+
+       vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
+               compatible = "regulator-gpio";
+
+               regulator-name = "vddshv8";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3000000>;
+               regulator-boot-on;
+               vin-supply = <&evm_5v0>;
+
+               gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+               states = <1800000 0x0
+                         3000000 0x1>;
+       };
+
+       poweroff: gpio-poweroff {
+               compatible = "gpio-poweroff";
+               gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
+               input;
+       };
+};
+
+&i2c1 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       lp8733: lp8733@60 {
+               compatible = "ti,lp8733";
+               reg = <0x60>;
+
+               buck0-in-supply =<&vsys_3v3>;
+               buck1-in-supply =<&vsys_3v3>;
+               ldo0-in-supply =<&evm_5v0>;
+               ldo1-in-supply =<&evm_5v0>;
+
+               lp8733_regulators: regulators {
+                       lp8733_buck0_reg: buck0 {
+                               /* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
+                               regulator-name = "lp8733-buck0";
+                               regulator-min-microvolt = <850000>;
+                               regulator-max-microvolt = <1250000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                       };
+
+                       lp8733_buck1_reg: buck1 {
+                               /* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
+                               regulator-name = "lp8733-buck1";
+                               regulator-min-microvolt = <850000>;
+                               regulator-max-microvolt = <1250000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       lp8733_ldo0_reg: ldo0 {
+                               /* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
+                               regulator-name = "lp8733-ldo0";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       lp8733_ldo1_reg: ldo1 {
+                               /* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
+                               regulator-name = "lp8733-ldo1";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                       };
+               };
+       };
+
+       lp8732: lp8732@61 {
+               compatible = "ti,lp8732";
+               reg = <0x61>;
+
+               buck0-in-supply =<&vsys_3v3>;
+               buck1-in-supply =<&vsys_3v3>;
+               ldo0-in-supply =<&vsys_3v3>;
+               ldo1-in-supply =<&vsys_3v3>;
+
+               lp8732_regulators: regulators {
+                       lp8732_buck0_reg: buck0 {
+                               /* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
+                               regulator-name = "lp8732-buck0";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                       };
+
+                       lp8732_buck1_reg: buck1 {
+                               /* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
+                               regulator-name = "lp8732-buck1";
+                               regulator-min-microvolt = <1350000>;
+                               regulator-max-microvolt = <1350000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       lp8732_ldo0_reg: ldo0 {
+                               /* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
+                               regulator-name = "lp8732-ldo0";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       lp8732_ldo1_reg: ldo1 {
+                               /* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
+                               regulator-name = "lp8732-ldo1";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                       };
+               };
+       };
+};
+
+&pcf_gpio_21 {
+       interrupt-parent = <&gpio7>;
+       interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcf_hdmi {
+       p0 {
+               /*
+                * PM_OEn to High: Disable routing I2C3 to PM_I2C
+                * With this PM_SEL(p3) should not matter
+                */
+               gpio-hog;
+               gpios = <0 GPIO_ACTIVE_LOW>;
+               output-high;
+               line-name = "pm_oe_n";
+       };
+};
+
+&mmc1 {
+       vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
+};
+
+&mac {
+       mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+                    <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,     /* P11 */
+                    <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;    /* P12 */
+       dual_emac;
+};
+
+&cpsw_emac0 {
+       phy_id = <&davinci_mdio>, <2>;
+       phy-mode = "rgmii-id";
+       dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+       phy_id = <&davinci_mdio>, <3>;
+       phy-mode = "rgmii-id";
+       dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+       dp83867_0: ethernet-phy@2 {
+               reg = <2>;
+               ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+               ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+               ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+               ti,impedance-control = <0x1f>;
+       };
+
+       dp83867_1: ethernet-phy@3 {
+               reg = <3>;
+               ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+               ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+               ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+               ti,impedance-control = <0x1f>;
+       };
+};
+
+/* No Sata on this device */
+&sata_phy {
+       status = "disabled";
+};
+
+&sata {
+       status = "disabled";
+};
+
+/* No RTC on this device */
+&rtc {
+       status = "disabled";
+};
+
+&usb2_phy1 {
+       phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&usb2_phy2 {
+       phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&dss {
+       /* Supplied by VDA_1V8_PLL */
+       vdda_video-supply = <&lp8732_ldo0_reg>;
+};
+
+&hdmi {
+       /* Supplied by VDA_1V8_PHY */
+       vdda_video-supply = <&lp8732_ldo1_reg>;
+};
index 9903ac774242806067cf19e5f03c969407c597b7..e50fbeea96e0f80aed44cea86647026e491dcd06 100644 (file)
@@ -29,7 +29,8 @@
        };
 
        evm_5v0: fixedregulator-evm5v0 {
-               /* Output 1 of TPS43351QDAPRQ1 */
+               /* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
+               /* Output 1 of LM5140QRWGTQ1 on dra71-evm */
                compatible = "regulator-fixed";
                regulator-name = "evm_5v0";
                regulator-min-microvolt = <5000000>;
@@ -40,7 +41,8 @@
        };
 
        vsys_3v3: fixedregulator-vsys3v3 {
-               /* Output 2 of TPS43351QDAPRQ1 */
+               /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
+               /* Output 2 of LM5140QRWGTQ1 on dra71-evm */
                compatible = "regulator-fixed";
                regulator-name = "vsys_3v3";
                regulator-min-microvolt = <3300000>;