[SCSI] st: raise device limit

The device limit of 128 tape drives was established in 2003 as a
significant increase from the 8 tape drives allowed previously.

We're seeing customer sites that between a large number of drives
and multipath are discovering more than 128 devices and running
into problems.

Now that we're not stuck having to store a pointer in array
and aren't limited by kmalloc failing on higher order allocs we can
lift the limit to fill the entire minor range based on the number
of modes.

Based on the current code, that's 2^17 devices.

Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt
index 685bf3582abe6104f367a76d48e03c5185bce911..f346abbdd6ff3a7aa16acb197e4dbe7b57d469ea 100644 (file)
--- a/Documentation/scsi/st.txt
+++ b/Documentation/scsi/st.txt
@@ -112,10 +112,8 @@ attempted).
 
 MINOR NUMBERS
 
-The tape driver currently supports 128 drives by default. This number
-can be increased by editing st.h and recompiling the driver if
-necessary. The upper limit is 2^17 drives if 4 modes for each drive
-are used.
+The tape driver currently supports up to 2^17 drives if 4 modes for
+each drive are used.
 
 The minor numbers consist of the following bit fields:
 

diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h
index b7a07c7bf4f8545db9ff080ad617a10c6f1b37a4..f3eee0f9f40c01631ad3e62cab4d7c4c5c557f56 100644 (file)
--- a/drivers/scsi/st.h
+++ b/drivers/scsi/st.h
@@ -78,7 +78,7 @@ struct st_modedef {
 #define ST_MODE_SHIFT (7 - ST_NBR_MODE_BITS)
 #define ST_MODE_MASK ((ST_NBR_MODES - 1) << ST_MODE_SHIFT)
 
-#define ST_MAX_TAPES 128
+#define ST_MAX_TAPES (1 << (20 - (ST_NBR_MODE_BITS + 1)))
 #define ST_MAX_TAPE_ENTRIES  (ST_MAX_TAPES << (ST_NBR_MODE_BITS + 1))
 
 /* The status related to each partition */