ARM: mx5/mx53_evk: Use gpio_request_one in mx53_evk_fec_reset

Current code inside mx53_evk_fec_reset uses gpio_direction_output with initial value of the GPIO and also sets
the GPIO value via gpio_set_value right after. This is not needed.

By using gpio_request_one it is possible to set the direction and initial value in one shot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 7b5735c5ea594e72b3884380052d10f6235c44e9..d771999a16720aaebb722362f2a4334d3f9ce536 100644 (file)
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -82,13 +82,12 @@ static inline void mx53_evk_fec_reset(void)
        int ret;
 
        /* reset FEC PHY */
-       ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
+       ret = gpio_request_one(SMD_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
+                                                       "fec-phy-reset");
        if (ret) {
                printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
                return;
        }
-       gpio_direction_output(SMD_FEC_PHY_RST, 0);
-       gpio_set_value(SMD_FEC_PHY_RST, 0);
        msleep(1);
        gpio_set_value(SMD_FEC_PHY_RST, 1);
 }