ibmveth: Add scatter-gather support
authorSantiago Leon <santil@linux.vnet.ibm.com>
Fri, 3 Sep 2010 18:28:36 +0000 (18:28 +0000)
committerDavid S. Miller <davem@davemloft.net>
Tue, 7 Sep 2010 01:21:48 +0000 (18:21 -0700)
ibmveth can scatter gather up to 6 segments. If we go over this then
we have no option but to call skb_linearize, like other drivers with
similar limitations do.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ibmveth.c

index aedcb180218233936d2bd29506776307a690b1f3..d8a89846c6a8a3331435de1b5d7ebf1fbcfd5d08 100644 (file)
@@ -897,6 +897,7 @@ static const struct ethtool_ops netdev_ethtool_ops = {
        .get_strings            = ibmveth_get_strings,
        .get_sset_count         = ibmveth_get_sset_count,
        .get_ethtool_stats      = ibmveth_get_ethtool_stats,
+       .set_sg                 = ethtool_op_set_sg,
 };
 
 static int ibmveth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
@@ -906,96 +907,158 @@ static int ibmveth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 
 #define page_offset(v) ((unsigned long)(v) & ((1 << 12) - 1))
 
-static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb,
-                                     struct net_device *netdev)
+static int ibmveth_send(struct ibmveth_adapter *adapter,
+                       union ibmveth_buf_desc *descs)
 {
-       struct ibmveth_adapter *adapter = netdev_priv(netdev);
-       union ibmveth_buf_desc desc;
-       unsigned long lpar_rc;
        unsigned long correlator;
        unsigned int retry_count;
-       unsigned int tx_dropped = 0;
-       unsigned int tx_bytes = 0;
-       unsigned int tx_packets = 0;
-       unsigned int tx_send_failed = 0;
-       unsigned int tx_map_failed = 0;
-       int used_bounce = 0;
-       unsigned long data_dma_addr;
+       unsigned long ret;
+
+       /*
+        * The retry count sets a maximum for the number of broadcast and
+        * multicast destinations within the system.
+        */
+       retry_count = 1024;
+       correlator = 0;
+       do {
+               ret = h_send_logical_lan(adapter->vdev->unit_address,
+                                            descs[0].desc, descs[1].desc,
+                                            descs[2].desc, descs[3].desc,
+                                            descs[4].desc, descs[5].desc,
+                                            correlator, &correlator);
+       } while ((ret == H_BUSY) && (retry_count--));
+
+       if (ret != H_SUCCESS && ret != H_DROPPED) {
+               ibmveth_error_printk("tx: h_send_logical_lan failed with "
+                                    "rc=%ld\n", ret);
+               return 1;
+       }
+
+       return 0;
+}
 
-       desc.fields.flags_len = IBMVETH_BUF_VALID | skb->len;
+static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb,
+                                     struct net_device *netdev)
+{
+       struct ibmveth_adapter *adapter = netdev_priv(netdev);
+       unsigned int desc_flags;
+       union ibmveth_buf_desc descs[6];
+       int last, i;
+       int force_bounce = 0;
+
+       /*
+        * veth handles a maximum of 6 segments including the header, so
+        * we have to linearize the skb if there are more than this.
+        */
+       if (skb_shinfo(skb)->nr_frags > 5 && __skb_linearize(skb)) {
+               netdev->stats.tx_dropped++;
+               goto out;
+       }
 
+       /* veth can't checksum offload UDP */
        if (skb->ip_summed == CHECKSUM_PARTIAL &&
            ip_hdr(skb)->protocol != IPPROTO_TCP && skb_checksum_help(skb)) {
                ibmveth_error_printk("tx: failed to checksum packet\n");
-               tx_dropped++;
+               netdev->stats.tx_dropped++;
                goto out;
        }
 
+       desc_flags = IBMVETH_BUF_VALID;
+
        if (skb->ip_summed == CHECKSUM_PARTIAL) {
-               unsigned char *buf = skb_transport_header(skb) + skb->csum_offset;
+               unsigned char *buf = skb_transport_header(skb) +
+                                               skb->csum_offset;
 
-               desc.fields.flags_len |= (IBMVETH_BUF_NO_CSUM | IBMVETH_BUF_CSUM_GOOD);
+               desc_flags |= (IBMVETH_BUF_NO_CSUM | IBMVETH_BUF_CSUM_GOOD);
 
                /* Need to zero out the checksum */
                buf[0] = 0;
                buf[1] = 0;
        }
 
-       if (skb->len < tx_copybreak) {
-               used_bounce = 1;
-       } else {
-               data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
-                                              skb->len, DMA_TO_DEVICE);
-               if (dma_mapping_error(&adapter->vdev->dev, data_dma_addr)) {
-                       if (!firmware_has_feature(FW_FEATURE_CMO))
-                               ibmveth_error_printk("tx: unable to map "
-                                                    "xmit buffer\n");
-                       tx_map_failed++;
-                       used_bounce = 1;
-               }
-       }
+retry_bounce:
+       memset(descs, 0, sizeof(descs));
 
-       if (used_bounce) {
+       /*
+        * If a linear packet is below the rx threshold then
+        * copy it into the static bounce buffer. This avoids the
+        * cost of a TCE insert and remove.
+        */
+       if (force_bounce || (!skb_is_nonlinear(skb) &&
+                               (skb->len < tx_copybreak))) {
                skb_copy_from_linear_data(skb, adapter->bounce_buffer,
                                          skb->len);
-               desc.fields.address = adapter->bounce_buffer_dma;
-       } else
-               desc.fields.address = data_dma_addr;
 
-       /* send the frame. Arbitrarily set retrycount to 1024 */
-       correlator = 0;
-       retry_count = 1024;
-       do {
-               lpar_rc = h_send_logical_lan(adapter->vdev->unit_address,
-                                            desc.desc, 0, 0, 0, 0, 0,
-                                            correlator, &correlator);
-       } while ((lpar_rc == H_BUSY) && (retry_count--));
-
-       if(lpar_rc != H_SUCCESS && lpar_rc != H_DROPPED) {
-               ibmveth_error_printk("tx: h_send_logical_lan failed with rc=%ld\n", lpar_rc);
-               ibmveth_error_printk("tx: valid=%d, len=%d, address=0x%08x\n",
-                                    (desc.fields.flags_len & IBMVETH_BUF_VALID) ? 1 : 0,
-                                    skb->len, desc.fields.address);
-               tx_send_failed++;
-               tx_dropped++;
+               descs[0].fields.flags_len = desc_flags | skb->len;
+               descs[0].fields.address = adapter->bounce_buffer_dma;
+
+               if (ibmveth_send(adapter, descs)) {
+                       adapter->tx_send_failed++;
+                       netdev->stats.tx_dropped++;
+               } else {
+                       netdev->stats.tx_packets++;
+                       netdev->stats.tx_bytes += skb->len;
+               }
+
+               goto out;
+       }
+
+       /* Map the header */
+       descs[0].fields.address = dma_map_single(&adapter->vdev->dev, skb->data,
+                                                skb_headlen(skb),
+                                                DMA_TO_DEVICE);
+       if (dma_mapping_error(&adapter->vdev->dev, descs[0].fields.address))
+               goto map_failed;
+
+       descs[0].fields.flags_len = desc_flags | skb_headlen(skb);
+
+       /* Map the frags */
+       for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+               unsigned long dma_addr;
+               skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+               dma_addr = dma_map_page(&adapter->vdev->dev, frag->page,
+                                       frag->page_offset, frag->size,
+                                       DMA_TO_DEVICE);
+
+               if (dma_mapping_error(&adapter->vdev->dev, dma_addr))
+                       goto map_failed_frags;
+
+               descs[i+1].fields.flags_len = desc_flags | frag->size;
+               descs[i+1].fields.address = dma_addr;
+       }
+
+       if (ibmveth_send(adapter, descs)) {
+               adapter->tx_send_failed++;
+               netdev->stats.tx_dropped++;
        } else {
-               tx_packets++;
-               tx_bytes += skb->len;
+               netdev->stats.tx_packets++;
+               netdev->stats.tx_bytes += skb->len;
        }
 
-       if (!used_bounce)
-               dma_unmap_single(&adapter->vdev->dev, data_dma_addr,
-                                skb->len, DMA_TO_DEVICE);
+       for (i = 0; i < skb_shinfo(skb)->nr_frags + 1; i++)
+               dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address,
+                              descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK,
+                              DMA_TO_DEVICE);
 
 out:
-       netdev->stats.tx_dropped += tx_dropped;
-       netdev->stats.tx_bytes += tx_bytes;
-       netdev->stats.tx_packets += tx_packets;
-       adapter->tx_send_failed += tx_send_failed;
-       adapter->tx_map_failed += tx_map_failed;
-
        dev_kfree_skb(skb);
        return NETDEV_TX_OK;
+
+map_failed_frags:
+       last = i+1;
+       for (i = 0; i < last; i++)
+               dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address,
+                              descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK,
+                              DMA_TO_DEVICE);
+
+map_failed:
+       if (!firmware_has_feature(FW_FEATURE_CMO))
+               ibmveth_error_printk("tx: unable to map xmit buffer\n");
+       adapter->tx_map_failed++;
+       skb_linearize(skb);
+       force_bounce = 1;
+       goto retry_bounce;
 }
 
 static int ibmveth_poll(struct napi_struct *napi, int budget)
@@ -1316,6 +1379,7 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_
        netdev->netdev_ops = &ibmveth_netdev_ops;
        netdev->ethtool_ops = &netdev_ethtool_ops;
        SET_NETDEV_DEV(netdev, &dev->dev);
+       netdev->features |= NETIF_F_SG;
 
        memcpy(netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);