[MIPS] Alchemy: move UART platform code to its proper place
authorSergei Shtylyov <sshtylyov@ru.mvista.com>
Thu, 3 Apr 2008 20:02:53 +0000 (00:02 +0400)
committerRalf Baechle <ralf@linux-mips.org>
Mon, 28 Apr 2008 16:14:28 +0000 (17:14 +0100)
Move the code registering the Alchemy UART platform devices from
drivers/serial/ to its proper place, into the Alchemy platform code.  Fix
the related Kconfig entry, while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/au1000/common/platform.c
drivers/serial/8250_au1x00.c [deleted file]
drivers/serial/Kconfig
drivers/serial/Makefile

index c1c860c6a6e1c8c1870ea29b6a9ccb5a04331aaa..7167972b1277d059f977c1b675b60c7f6c851f1b 100644 (file)
@@ -3,16 +3,65 @@
  *
  * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
  *
+ * (C) Copyright Embedded Alley Solutions, Inc 2005
+ * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
+ *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
 #include <linux/platform_device.h>
+#include <linux/serial_8250.h>
 #include <linux/init.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
 
+#define PORT(_base, _irq)                              \
+       {                                               \
+               .iobase         = _base,                \
+               .membase        = (void __iomem *)_base,\
+               .mapbase        = CPHYSADDR(_base),     \
+               .irq            = _irq,                 \
+               .regshift       = 2,                    \
+               .iotype         = UPIO_AU,              \
+               .flags          = UPF_SKIP_TEST         \
+       }
+
+static struct plat_serial8250_port au1x00_uart_data[] = {
+#if defined(CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_SOC_AU1000)
+       PORT(UART0_ADDR, AU1000_UART0_INT),
+       PORT(UART1_ADDR, AU1000_UART1_INT),
+       PORT(UART2_ADDR, AU1000_UART2_INT),
+       PORT(UART3_ADDR, AU1000_UART3_INT),
+#elif defined(CONFIG_SOC_AU1500)
+       PORT(UART0_ADDR, AU1500_UART0_INT),
+       PORT(UART3_ADDR, AU1500_UART3_INT),
+#elif defined(CONFIG_SOC_AU1100)
+       PORT(UART0_ADDR, AU1100_UART0_INT),
+       PORT(UART1_ADDR, AU1100_UART1_INT),
+       PORT(UART3_ADDR, AU1100_UART3_INT),
+#elif defined(CONFIG_SOC_AU1550)
+       PORT(UART0_ADDR, AU1550_UART0_INT),
+       PORT(UART1_ADDR, AU1550_UART1_INT),
+       PORT(UART3_ADDR, AU1550_UART3_INT),
+#elif defined(CONFIG_SOC_AU1200)
+       PORT(UART0_ADDR, AU1200_UART0_INT),
+       PORT(UART1_ADDR, AU1200_UART1_INT),
+#endif
+#endif /* CONFIG_SERIAL_8250_AU1X00 */
+       { },
+};
+
+static struct platform_device au1xx0_uart_device = {
+       .name                   = "serial8250",
+       .id                     = PLAT8250_DEV_AU1X00,
+       .dev                    = {
+               .platform_data  = au1x00_uart_data,
+       },
+};
+
 /* OHCI (USB full speed host controller) */
 static struct resource au1xxx_usb_ohci_resources[] = {
        [0] = {
@@ -287,6 +336,7 @@ static struct platform_device pbdb_smbus_device = {
 #endif
 
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
+       &au1xx0_uart_device,
        &au1xxx_usb_ohci_device,
        &au1x00_pcmcia_device,
 #ifdef CONFIG_FB_AU1100
@@ -310,6 +360,13 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 
 int __init au1xxx_platform_init(void)
 {
+       unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
+       int i;
+
+       /* Fill up uartclk. */
+       for (i = 0; au1x00_uart_data[i].flags ; i++)
+               au1x00_uart_data[i].uartclk = uartclk;
+
        return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices));
 }
 
diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c
deleted file mode 100644 (file)
index 58015fd..0000000
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Serial Device Initialisation for Au1x00
- *
- * (C) Copyright Embedded Alley Solutions, Inc 2005
- * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/serial_core.h>
-#include <linux/signal.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#include <linux/serial_8250.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#include "8250.h"
-
-#define PORT(_base, _irq)                              \
-       {                                               \
-               .iobase         = _base,                \
-               .membase        = (void __iomem *)_base,\
-               .mapbase        = CPHYSADDR(_base),     \
-               .irq            = _irq,                 \
-               .uartclk        = 0,    /* filled */    \
-               .regshift       = 2,                    \
-               .iotype         = UPIO_AU,              \
-               .flags          = UPF_SKIP_TEST         \
-       }
-
-static struct plat_serial8250_port au1x00_data[] = {
-#if defined(CONFIG_SOC_AU1000)
-       PORT(UART0_ADDR, AU1000_UART0_INT),
-       PORT(UART1_ADDR, AU1000_UART1_INT),
-       PORT(UART2_ADDR, AU1000_UART2_INT),
-       PORT(UART3_ADDR, AU1000_UART3_INT),
-#elif defined(CONFIG_SOC_AU1500)
-       PORT(UART0_ADDR, AU1500_UART0_INT),
-       PORT(UART3_ADDR, AU1500_UART3_INT),
-#elif defined(CONFIG_SOC_AU1100)
-       PORT(UART0_ADDR, AU1100_UART0_INT),
-       PORT(UART1_ADDR, AU1100_UART1_INT),
-       /* The internal UART2 does not exist on the AU1100 processor. */
-       PORT(UART3_ADDR, AU1100_UART3_INT),
-#elif defined(CONFIG_SOC_AU1550)
-       PORT(UART0_ADDR, AU1550_UART0_INT),
-       PORT(UART1_ADDR, AU1550_UART1_INT),
-       PORT(UART3_ADDR, AU1550_UART3_INT),
-#elif defined(CONFIG_SOC_AU1200)
-       PORT(UART0_ADDR, AU1200_UART0_INT),
-       PORT(UART1_ADDR, AU1200_UART1_INT),
-#endif
-       { },
-};
-
-static struct platform_device au1x00_device = {
-       .name                   = "serial8250",
-       .id                     = PLAT8250_DEV_AU1X00,
-       .dev                    = {
-               .platform_data  = au1x00_data,
-       },
-};
-
-static int __init au1x00_init(void)
-{
-       int i;
-       unsigned int uartclk;
-
-       /* get uart clock */
-       uartclk = get_au1x00_uart_baud_base() * 16;
-
-       /* fill up uartclk */
-       for (i = 0; au1x00_data[i].flags ; i++)
-               au1x00_data[i].uartclk = uartclk;
-
-       return platform_device_register(&au1x00_device);
-}
-
-/* XXX: Yes, I know this doesn't yet work. */
-static void __exit au1x00_exit(void)
-{
-       platform_device_unregister(&au1x00_device);
-}
-
-module_init(au1x00_init);
-module_exit(au1x00_exit);
-
-MODULE_AUTHOR("Pantelis Antoniou <pantelis@embeddedalley.com>");
-MODULE_DESCRIPTION("8250 serial probe module for Au1x000 cards");
-MODULE_LICENSE("GPL");
index f7cd9504d81162c1e08c8f3b30ff18b3a40d3920..34b809e3b59651dd17ec404ebd3bc9a1be0a421a 100644 (file)
@@ -262,12 +262,12 @@ config SERIAL_8250_ACORN
          cards.  If unsure, say N.
 
 config SERIAL_8250_AU1X00
-       bool "AU1X00 serial port support"
+       bool "Au1x00 serial port support"
        depends on SERIAL_8250 != n && SOC_AU1X00
        help
-         If you have an Au1x00 board and want to use the serial port, say Y
-         to this option.  The driver can handle 1 or 2 serial ports.
-         If unsure, say N.
+         If you have an Au1x00 SOC based board and want to use the serial port,
+         say Y to this option. The driver can handle up to 4 serial ports,
+         depending on the SOC. If unsure, say N.
 
 config SERIAL_8250_RM9K
        bool "Support for MIPS RM9xxx integrated serial port"
index 3cbea5494724ac978cd6c0221a1ec038b34efed3..f02ff9fad017de0dbcd6b7396f72141ec34e32c9 100644 (file)
@@ -20,7 +20,6 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
 obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
 obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
 obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
-obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
 obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
 obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
 obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o