<para>
At the core of every DRM driver is a <structname>drm_driver</structname>
structure. Drivers typically statically initialize a drm_driver structure,
- and then pass it to one of the <function>drm_*_init()</function> functions
- to register it with the DRM subsystem.
- </para>
- <para>
- Newer drivers that no longer require a <structname>drm_bus</structname>
- structure can alternatively use the low-level device initialization and
- registration functions such as <function>drm_dev_alloc()</function> and
- <function>drm_dev_register()</function> directly.
+ and then pass it to <function>drm_dev_alloc()</function> to allocate a
+ device instance. After the device instance is fully initialized it can be
+ registered (which makes it accessible from userspace) using
+ <function>drm_dev_register()</function>.
</para>
<para>
The <structname>drm_driver</structname> structure contains static
</sect3>
</sect2>
<sect2>
- <title>Device Registration</title>
- <para>
- A number of functions are provided to help with device registration.
- The functions deal with PCI and platform devices, respectively.
- </para>
-!Edrivers/gpu/drm/drm_pci.c
-!Edrivers/gpu/drm/drm_platform.c
- <para>
- New drivers that no longer rely on the services provided by the
- <structname>drm_bus</structname> structure can call the low-level
- device registration functions directly. The
- <function>drm_dev_alloc()</function> function can be used to allocate
- and initialize a new <structname>drm_device</structname> structure.
- Drivers will typically want to perform some additional setup on this
- structure, such as allocating driver-specific data and storing a
- pointer to it in the DRM device's <structfield>dev_private</structfield>
- field. Drivers should also set the device's unique name using the
- <function>drm_dev_set_unique()</function> function. After it has been
- set up a device can be registered with the DRM subsystem by calling
- <function>drm_dev_register()</function>. This will cause the device to
- be exposed to userspace and will call the driver's
- <structfield>.load()</structfield> implementation. When a device is
- removed, the DRM device can safely be unregistered and freed by calling
- <function>drm_dev_unregister()</function> followed by a call to
- <function>drm_dev_unref()</function>.
- </para>
+ <title>Device Instance and Driver Handling</title>
+!Pdrivers/gpu/drm/drm_drv.c driver instance overview
!Edrivers/gpu/drm/drm_drv.c
</sect2>
<sect2>
<title>Driver Load</title>
- <para>
- The <methodname>load</methodname> method is the driver and device
- initialization entry point. The method is responsible for allocating and
- initializing driver private data, performing resource allocation and
- mapping (e.g. acquiring
- clocks, mapping registers or allocating command buffers), initializing
- the memory manager (<xref linkend="drm-memory-management"/>), installing
- the IRQ handler (<xref linkend="drm-irq-registration"/>), setting up
- vertical blanking handling (<xref linkend="drm-vertical-blank"/>), mode
- setting (<xref linkend="drm-mode-setting"/>) and initial output
- configuration (<xref linkend="drm-kms-init"/>).
- </para>
- <note><para>
- If compatibility is a concern (e.g. with drivers converted over from
- User Mode Setting to Kernel Mode Setting), care must be taken to prevent
- device initialization and control that is incompatible with currently
- active userspace drivers. For instance, if user level mode setting
- drivers are in use, it would be problematic to perform output discovery
- & configuration at load time. Likewise, if user-level drivers
- unaware of memory management are in use, memory management and command
- buffer setup may need to be omitted. These requirements are
- driver-specific, and care needs to be taken to keep both old and new
- applications and libraries working.
- </para></note>
- <synopsis>int (*load) (struct drm_device *, unsigned long flags);</synopsis>
- <para>
- The method takes two arguments, a pointer to the newly created
- <structname>drm_device</structname> and flags. The flags are used to
- pass the <structfield>driver_data</structfield> field of the device id
- corresponding to the device passed to <function>drm_*_init()</function>.
- Only PCI devices currently use this, USB and platform DRM drivers have
- their <methodname>load</methodname> method called with flags to 0.
- </para>
- <sect3>
- <title>Driver Private Data</title>
- <para>
- The driver private hangs off the main
- <structname>drm_device</structname> structure and can be used for
- tracking various device-specific bits of information, like register
- offsets, command buffer status, register state for suspend/resume, etc.
- At load time, a driver may simply allocate one and set
- <structname>drm_device</structname>.<structfield>dev_priv</structfield>
- appropriately; it should be freed and
- <structname>drm_device</structname>.<structfield>dev_priv</structfield>
- set to NULL when the driver is unloaded.
- </para>
- </sect3>
<sect3 id="drm-irq-registration">
<title>IRQ Registration</title>
<para>
</para>
</sect3>
</sect2>
+ <sect2>
+ <title>Bus-specific Device Registration and PCI Support</title>
+ <para>
+ A number of functions are provided to help with device registration.
+ The functions deal with PCI and platform devices respectively and are
+ only provided for historical reasons. These are all deprecated and
+ shouldn't be used in new drivers. Besides that there's a few
+ helpers for pci drivers.
+ </para>
+!Edrivers/gpu/drm/drm_pci.c
+!Edrivers/gpu/drm/drm_platform.c
+ </sect2>
</sect1>
<!-- Internals: memory management -->
drm_dev_unref(minor->dev);
}
+/**
+ * DOC: driver instance overview
+ *
+ * A device instance for a drm driver is represented by struct &drm_device. This
+ * is allocated with drm_dev_alloc(), usually from bus-specific ->probe()
+ * callbacks implemented by the driver. The driver then needs to initialize all
+ * the various subsystems for the drm device like memory management, vblank
+ * handling, modesetting support and intial output configuration plus obviously
+ * initialize all the corresponding hardware bits. An important part of this is
+ * also calling drm_dev_set_unique() to set the userspace-visible unique name of
+ * this device instance. Finally when everything is up and running and ready for
+ * userspace the device instance can be published using drm_dev_register().
+ *
+ * There is also deprecated support for initalizing device instances using
+ * bus-specific helpers and the ->load() callback. But due to
+ * backwards-compatibility needs the device instance have to be published too
+ * early, which requires unpretty global locking to make safe and is therefore
+ * only support for existing drivers not yet converted to the new scheme.
+ *
+ * When cleaning up a device instance everything needs to be done in reverse:
+ * First unpublish the device instance with drm_dev_unregister(). Then clean up
+ * any other resources allocated at device initialization and drop the driver's
+ * reference to &drm_device using drm_dev_unref().
+ *
+ * Note that the lifetime rules for &drm_device instance has still a lot of
+ * historical baggage. Hence use the reference counting provided by
+ * drm_dev_ref() and drm_dev_unref() only carefully.
+ *
+ * Also note that embedding of &drm_device is currently not (yet) supported (but
+ * it would be easy to add). Drivers can store driver-private data in the
+ * dev_priv field of &drm_device.
+ */
+
/**
* drm_put_dev - Unregister and release a DRM device
* @dev: DRM device
*
* Called at module unload time or when a PCI device is unplugged.
*
- * Use of this function is discouraged. It will eventually go away completely.
- * Please use drm_dev_unregister() and drm_dev_unref() explicitly instead.
- *
* Cleans up all DRM device, calling drm_lastclose().
+ *
+ * Note: Use of this function is deprecated. It will eventually go away
+ * completely. Please use drm_dev_unregister() and drm_dev_unref() explicitly
+ * instead to make sure that the device isn't userspace accessible any more
+ * while teardown is in progress, ensuring that userspace can't access an
+ * inconsistent state.
*/
void drm_put_dev(struct drm_device *dev)
{
*
* Allocate and initialize a new DRM device. No device registration is done.
* Call drm_dev_register() to advertice the device to user space and register it
- * with other core subsystems.
+ * with other core subsystems. This should be done last in the device
+ * initialization sequence to make sure userspace can't access an inconsistent
+ * state.
*
* The initial ref-count of the object is 1. Use drm_dev_ref() and
* drm_dev_unref() to take and drop further ref-counts.
*
* Never call this twice on any device!
*
+ * NOTE: To ensure backward compatibility with existing drivers method this
+ * function calls the ->load() method after registering the device nodes,
+ * creating race conditions. Usage of the ->load() methods is therefore
+ * deprecated, drivers must perform all initialization before calling
+ * drm_dev_register().
+ *
* RETURNS:
* 0 on success, negative error code on failure.
*/
* Unregister the DRM device from the system. This does the reverse of
* drm_dev_register() but does not deallocate the device. The caller must call
* drm_dev_unref() to drop their final reference.
+ *
+ * This should be called first in the device teardown code to make sure
+ * userspace can't access the device instance any more.
*/
void drm_dev_unregister(struct drm_device *dev)
{
* then register the character device and inter module information.
* Try and register, if we fail to register, backout previous work.
*
+ * NOTE: This function is deprecated, please use drm_dev_alloc() and
+ * drm_dev_register() instead and remove your ->load() callback.
+ *
* Return: 0 on success or a negative error code on failure.
*/
int drm_get_pci_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
* Initializes a drm_device structures, registering the stubs and initializing
* the AGP device.
*
+ * NOTE: This function is deprecated. Modern modesetting drm drivers should use
+ * pci_register_driver() directly, this function only provides shadow-binding
+ * support for old legacy drivers on top of that core pci function.
+ *
* Return: 0 on success or a negative error code on failure.
*/
int drm_pci_init(struct drm_driver *driver, struct pci_driver *pdriver)
*
* Unregisters one or more devices matched by a PCI driver from the DRM
* subsystem.
+ *
+ * NOTE: This function is deprecated. Modern modesetting drm drivers should use
+ * pci_unregister_driver() directly, this function only provides shadow-binding
+ * support for old legacy drivers on top of that core pci function.
*/
void drm_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver)
{
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff