bgmac: add support for Northstar SoC (BCM4707, BCM53018)

This adds support for the Northstar SoC. This SoC does not have a PMU in
bcma and no register on it should be called. In addition it support 2.5
GBit/s Ethernet to the PHY.

This GMAC core is not fully working there are still problems with the
DMA controller.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index 2cdacb852e81a98713fed0ab2d57f5d466268cce..5d41f414e11a294ca8090e2415a12929a34b9355 100644 (file)
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -848,6 +848,9 @@ static void bgmac_mac_speed(struct bgmac *bgmac)
        case SPEED_1000:
                set |= BGMAC_CMDCFG_ES_1000;
                break;
+       case SPEED_2500:
+               set |= BGMAC_CMDCFG_ES_2500;
+               break;
        default:
                bgmac_err(bgmac, "Unsupported speed: %d\n", bgmac->mac_speed);
        }
@@ -860,12 +863,26 @@ static void bgmac_mac_speed(struct bgmac *bgmac)
 
 static void bgmac_miiconfig(struct bgmac *bgmac)
 {
-       u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
-                       BGMAC_DS_MM_SHIFT;
-       if (imode == 0 || imode == 1) {
-               bgmac->mac_speed = SPEED_100;
+       struct bcma_device *core = bgmac->core;
+       struct bcma_chipinfo *ci = &core->bus->chipinfo;
+       u8 imode;
+
+       if (ci->id == BCMA_CHIP_ID_BCM4707 ||
+           ci->id == BCMA_CHIP_ID_BCM53018) {
+               bcma_awrite32(core, BCMA_IOCTL,
+                             bcma_aread32(core, BCMA_IOCTL) | 0x40 |
+                             BGMAC_BCMA_IOCTL_SW_CLKEN);
+               bgmac->mac_speed = SPEED_2500;
                bgmac->mac_duplex = DUPLEX_FULL;
                bgmac_mac_speed(bgmac);
+       } else {
+               imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) &
+                       BGMAC_DS_MM_MASK) >> BGMAC_DS_MM_SHIFT;
+               if (imode == 0 || imode == 1) {
+                       bgmac->mac_speed = SPEED_100;
+                       bgmac->mac_duplex = DUPLEX_FULL;
+                       bgmac_mac_speed(bgmac);
+               }
        }
 }
 
@@ -875,7 +892,7 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
        struct bcma_device *core = bgmac->core;
        struct bcma_bus *bus = core->bus;
        struct bcma_chipinfo *ci = &bus->chipinfo;
-       u32 flags = 0;
+       u32 flags;
        u32 iost;
        int i;
 
@@ -903,15 +920,21 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
            (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188))
                iost &= ~BGMAC_BCMA_IOST_ATTACHED;
 
-       if (iost & BGMAC_BCMA_IOST_ATTACHED) {
-               flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
-               if (!bgmac->has_robosw)
-                       flags |= BGMAC_BCMA_IOCTL_SW_RESET;
+       /* 3GMAC: for BCM4707, only do core reset at bgmac_probe() */
+       if (ci->id != BCMA_CHIP_ID_BCM4707) {
+               flags = 0;
+               if (iost & BGMAC_BCMA_IOST_ATTACHED) {
+                       flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
+                       if (!bgmac->has_robosw)
+                               flags |= BGMAC_BCMA_IOCTL_SW_RESET;
+               }
+               bcma_core_enable(core, flags);
        }
 
-       bcma_core_enable(core, flags);
-
-       if (core->id.rev > 2) {
+       /* Request Misc PLL for corerev > 2 */
+       if (core->id.rev > 2 &&
+           ci->id != BCMA_CHIP_ID_BCM4707 &&
+           ci->id != BCMA_CHIP_ID_BCM53018) {
                bgmac_set(bgmac, BCMA_CLKCTLST,
                          BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ);
                bgmac_wait_value(bgmac->core, BCMA_CLKCTLST,
@@ -1049,12 +1072,16 @@ static void bgmac_enable(struct bgmac *bgmac)
                break;
        }
 
-       rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
-       rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
-       bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000;
-       mdp = (bp_clk * 128 / 1000) - 3;
-       rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
-       bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
+       if (ci->id != BCMA_CHIP_ID_BCM4707 &&
+           ci->id != BCMA_CHIP_ID_BCM53018) {
+               rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
+               rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
+               bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) /
+                               1000000;
+               mdp = (bp_clk * 128 / 1000) - 3;
+               rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
+               bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
+       }
 }
 
 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */

diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h
index 2da12ed33a5526ac83520b59e6c0d121cf5adaa8..89fa5bc69c515f3fd3a4c309558294448fceb386 100644 (file)
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -189,6 +189,7 @@
 #define   BGMAC_CMDCFG_ES_10                   0x00000000
 #define   BGMAC_CMDCFG_ES_100                  0x00000004
 #define   BGMAC_CMDCFG_ES_1000                 0x00000008
+#define   BGMAC_CMDCFG_ES_2500                 0x0000000C
 #define  BGMAC_CMDCFG_PROM                     0x00000010      /* Set to activate promiscuous mode */
 #define  BGMAC_CMDCFG_PAD_EN                   0x00000020
 #define  BGMAC_CMDCFG_CF                       0x00000040