b43: N-PHY: implement TX power control coef setup
authorRafał Miłecki <zajec5@gmail.com>
Fri, 15 Jan 2010 15:24:57 +0000 (16:24 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 15 Jan 2010 22:05:43 +0000 (17:05 -0500)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/b43/phy_n.c

index f982f56d5bf343460d36ff82c28662486b6fcc6d..a0e8283519fdb740d2739c2888d93c2f3e8ebd29 100644 (file)
@@ -659,6 +659,73 @@ static void b43_nphy_stay_in_carrier_search(struct b43_wldev *dev, bool enable)
        }
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlCoefSetup */
+static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
+{
+       struct b43_phy_n *nphy = dev->phy.n;
+       int i, j;
+       u32 tmp;
+       u32 cur_real, cur_imag, real_part, imag_part;
+
+       u16 buffer[7];
+
+       if (nphy->hang_avoid)
+               b43_nphy_stay_in_carrier_search(dev, true);
+
+       /* TODO: Read an N PHY Table with ID 15, length 7, offset 80,
+               width 16, and data pointer buffer */
+
+       for (i = 0; i < 2; i++) {
+               tmp = ((buffer[i * 2] & 0x3FF) << 10) |
+                       (buffer[i * 2 + 1] & 0x3FF);
+               b43_phy_write(dev, B43_NPHY_TABLE_ADDR,
+                               (((i + 26) << 10) | 320));
+               for (j = 0; j < 128; j++) {
+                       b43_phy_write(dev, B43_NPHY_TABLE_DATAHI,
+                                       ((tmp >> 16) & 0xFFFF));
+                       b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+                                       (tmp & 0xFFFF));
+               }
+       }
+
+       for (i = 0; i < 2; i++) {
+               tmp = buffer[5 + i];
+               real_part = (tmp >> 8) & 0xFF;
+               imag_part = (tmp & 0xFF);
+               b43_phy_write(dev, B43_NPHY_TABLE_ADDR,
+                               (((i + 26) << 10) | 448));
+
+               if (dev->phy.rev >= 3) {
+                       cur_real = real_part;
+                       cur_imag = imag_part;
+                       tmp = ((cur_real & 0xFF) << 8) | (cur_imag & 0xFF);
+               }
+
+               for (j = 0; j < 128; j++) {
+                       if (dev->phy.rev < 3) {
+                               cur_real = (real_part * loscale[j] + 128) >> 8;
+                               cur_imag = (imag_part * loscale[j] + 128) >> 8;
+                               tmp = ((cur_real & 0xFF) << 8) |
+                                       (cur_imag & 0xFF);
+                       }
+                       b43_phy_write(dev, B43_NPHY_TABLE_DATAHI,
+                                       ((tmp >> 16) & 0xFFFF));
+                       b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+                                       (tmp & 0xFFFF));
+               }
+       }
+
+       if (dev->phy.rev >= 3) {
+               b43_shm_write16(dev, B43_SHM_SHARED,
+                               B43_SHM_SH_NPHY_TXPWR_INDX0, 0xFFFF);
+               b43_shm_write16(dev, B43_SHM_SHARED,
+                               B43_SHM_SH_NPHY_TXPWR_INDX1, 0xFFFF);
+       }
+
+       if (nphy->hang_avoid)
+               b43_nphy_stay_in_carrier_search(dev, false);
+}
+
 enum b43_nphy_rf_sequence {
        B43_RFSEQ_RX2TX,
        B43_RFSEQ_TX2RX,
@@ -2040,7 +2107,7 @@ int b43_phy_initn(struct b43_wldev *dev)
                b43_nphy_restore_cal(dev);
        }
 
-       /* b43_nphy_tx_pwr_ctrl_coef_setup(dev); */
+       b43_nphy_tx_pwr_ctrl_coef_setup(dev);
        /* TODO N PHY TX Power Control Enable with argument tx_pwr_state */
        b43_phy_write(dev, B43_NPHY_TXMACIF_HOLDOFF, 0x0015);
        b43_phy_write(dev, B43_NPHY_TXMACDELAY, 0x0320);