When the admin enables/disables cqe compression, updating
mpwqe stride size is required:
CQE compress ON ==> stride size = 256B
CQE compress OFF ==> stride size = 64B
This is already done on driver load via mlx5e_set_rq_type_params, all we
need is just to call it on arbitrary admin changes of cqe compression
state via priv flags or when changing timestamping state
(as it is mutually exclusive with cqe compression).
This bug introduces no functional damage, it only makes cqe compression
occur less often, since in ConnectX4-LX CQE compression is performed
only on packets smaller than stride size.
Tested:
ethtool --set-priv-flags ethxx rx_cqe_compress on
pktgen with 64 < pkt size < 256 and netperf TCP_STREAM (IPv4/IPv6)
verify `ethtool -S ethxx | grep compress` are advancing more often
(rapidly)
Fixes:
7219ab34f184 ("net/mlx5e: CQE compression")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: David S. Miller <davem@davemloft.net>
void mlx5e_set_rx_cq_mode_params(struct mlx5e_params *params,
u8 cq_period_mode);
+void mlx5e_set_rq_type_params(struct mlx5e_priv *priv, u8 rq_type);
static inline void mlx5e_tx_notify_hw(struct mlx5e_sq *sq,
struct mlx5_wqe_ctrl_seg *ctrl, int bf_sz)
mlx5e_modify_rx_cqe_compression_locked(priv, enable);
priv->params.rx_cqe_compress_def = enable;
+ mlx5e_set_rq_type_params(priv, priv->params.rq_wq_type);
return 0;
}
MLX5_CAP_ETH(mdev, reg_umr_sq);
}
-static void mlx5e_set_rq_type_params(struct mlx5e_priv *priv, u8 rq_type)
+void mlx5e_set_rq_type_params(struct mlx5e_priv *priv, u8 rq_type)
{
priv->params.rq_wq_type = rq_type;
priv->params.lro_wqe_sz = MLX5E_PARAMS_DEFAULT_LRO_WQE_SZ;
mlx5e_close_locked(priv->netdev);
MLX5E_SET_PFLAG(priv, MLX5E_PFLAG_RX_CQE_COMPRESS, val);
+ mlx5e_set_rq_type_params(priv, priv->params.rq_wq_type);
if (was_opened)
mlx5e_open_locked(priv->netdev);