{
printk("SnapGear: EraseConfig init\n");
/* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(IRL0_IRQ, eraseconfig_interrupt, SA_INTERRUPT,
+ if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
"Erase Config", NULL))
printk("SnapGear: failed to register IRQ%d for Reset witch\n",
IRL0_IRQ);
return __irq_demux(irq);
}
-static struct irqaction irq0 = { hd64461_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64461", NULL, NULL };
+static struct irqaction irq0 = { hd64461_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "HD64461", NULL, NULL };
int __init setup_hd64461(void)
{
if (!request_region(HD64465_REG_GPACR, 0x1000, MODNAME))
return -EBUSY;
if (request_irq(HD64465_IRQ_GPIO, hd64465_gpio_interrupt,
- SA_INTERRUPT, MODNAME, 0))
+ IRQF_DISABLED, MODNAME, 0))
goto out_irqfailed;
printk("HD64465 GPIO layer on irq %d\n", HD64465_IRQ_GPIO);
return irq;
}
-static struct irqaction irq0 = { hd64465_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64465", NULL, NULL};
+static struct irqaction irq0 = { hd64465_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "HD64465", NULL, NULL};
static int __init setup_hd64465(void)
static struct irqaction irq0 = {
.name = "voyagergx",
.handler = voyagergx_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
};
static struct irqaction g2_dma_irq = {
.name = "g2 DMA handler",
.handler = g2_dma_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
};
static int g2_enable_dma(struct dma_channel *chan)
static struct irqaction pvr2_dma_irq = {
.name = "pvr2 DMA handler",
.handler = pvr2_dma_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
};
static struct dma_ops pvr2_dma_ops = {
chan->chan);
return request_irq(get_dmte_irq(chan->chan), dma_tei,
- SA_INTERRUPT, name, chan);
+ IRQF_DISABLED, name, chan);
}
static void sh_dmac_free_dma(struct dma_channel *chan)
#ifdef CONFIG_CPU_SH4
make_ipr_irq(DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
- i = request_irq(DMAE_IRQ, dma_err, SA_INTERRUPT, "DMAC Address Error", 0);
+ i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
if (i < 0)
return i;
#endif
PHYSADDR(memory_end) - PHYSADDR(memory_start));
if (request_irq(ST40PCI_ERR_IRQ, st40_pci_irq,
- SA_INTERRUPT, "st40pci", NULL)) {
+ IRQF_DISABLED, "st40pci", NULL)) {
printk(KERN_ERR "st40pci: Cannot hook interrupt\n");
return -EIO;
}
static struct irqaction tmu_irq = {
.name = "timer",
.handler = tmu_timer_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
};
static int fd_request_irq(void)
{
if(can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
- "floppy", NULL);
+ return request_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy", NULL);
else
- return request_irq(FLOPPY_IRQ, floppy_interrupt, SA_INTERRUPT,
- "floppy", NULL);
-
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ IRQF_DISABLED, "floppy", NULL);
}
static unsigned long dma_mem_alloc(unsigned long size)
#define AUX_IRQ 12
#define aux_request_irq(hand, dev_id) \
- request_irq(AUX_IRQ, hand, SA_SHIRQ, "PS2 Mouse", dev_id)
+ request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000