PCI: unconditionally clear AER uncorr status register during cleanup

The current implementation of pci_cleanup_aer_uncorrect_error_status
only clears either fatal or non-fatal error status bits depending
on the state of the I/O channel. This implementation will then often
leave some bits set after PCI error recovery completes.  The uncleared bit
settings will then be falsely reported the next time an AER interrupt is
generated for that hierarchy. An easy way to illustrate this issue is to
use the aer-inject module to simultaneously inject both an uncorrectable
non-fatal and uncorrectable fatal error.  One of the errors will not be
cleared.

This patch resolves this issue by unconditionally clearing all bits in
the AER uncorrectable status register. All settings and corrective action
strategies are saved and determined before
pci_cleanup_aer_uncorrect_error_status is called, so this change should not
affect errory handling functionality.

Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 2fbbcee033a7dd1e428d6c490b705042f56a7e86..ff4720583aa78b714a086839b89cd8cf006d67d9 100644 (file)
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -84,19 +84,15 @@ EXPORT_SYMBOL_GPL(pci_disable_pcie_error_reporting);
 int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
 {
        int pos;
-       u32 status, mask;
+       u32 status;
 
        pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
        if (!pos)
                return -EIO;
 
        pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
-       pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
-       if (dev->error_state == pci_channel_io_normal)
-               status &= ~mask; /* Clear corresponding nonfatal bits */
-       else
-               status &= mask; /* Clear corresponding fatal bits */
-       pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
+       if (status)
+               pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
 
        return 0;
 }