sky2: fix shutdown synchronization

The logic in sky2_down was incorrect. Receiver could report status
after rx_stop was called.

The steps need to be:
   * stop new frames from being transmitted
   * shut off transmit/receive logic
   * synchronize with NAPI to process status info about transmitter
     and receiver

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index cc1c8d13845f99bcca52c546e94420fe0f10ba7e..fd7accf8f30571c7aa3917d4c916ea3a31ec48e8 100644 (file)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1815,8 +1815,6 @@ static int sky2_down(struct net_device *dev)
        sky2_write32(hw, B0_IMSK, imask);
        sky2_read32(hw, B0_IMSK);
 
-       synchronize_irq(hw->pdev->irq);
-
        /* Force flow control off */
        sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
 
@@ -1831,9 +1829,6 @@ static int sky2_down(struct net_device *dev)
        ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
        gma_write16(hw, port, GM_GP_CTRL, ctrl);
 
-       /* Make sure no packets are pending */
-       napi_synchronize(&hw->napi);
-
        sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
 
        /* Workaround shared GMAC reset */
@@ -1864,6 +1859,15 @@ static int sky2_down(struct net_device *dev)
        sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
        sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
 
+       /* Force any delayed status interrrupt and NAPI */
+       sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
+       sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
+       sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
+       sky2_read8(hw, STAT_ISR_TIMER_CTRL);
+
+       synchronize_irq(hw->pdev->irq);
+       napi_synchronize(&hw->napi);
+
        sky2_phy_power_down(hw, port);
 
        /* turn off LED's */