ARM: dts: sun8i: h3: Enable USB OTG on the Beelink X2

This STB has a type A socket which acts as OTG.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index e7fae65eb5d3dd88b478c4e4f81050c1790e5568..10da56e86ab800809e9f28b72bd9b94edf02a547 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -100,6 +100,10 @@
        };
 };
 
+&ehci0 {
+       status = "okay";
+};
+
 &ehci1 {
        status = "okay";
 };
@@ -147,10 +151,19 @@
        status = "okay";
 };
 
+&ohci0 {
+       status = "okay";
+};
+
 &ohci1 {
        status = "okay";
 };
 
+&reg_usb0_vbus {
+       gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+       status = "okay";
+};
+
 &spdif {
        pinctrl-names = "default";
        pinctrl-0 = <&spdif_tx_pins_a>;
@@ -163,7 +176,14 @@
        status = "okay";
 };
 
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
 &usbphy {
-       /* USB VBUS is on as long as VCC-IO is on */
+       /* USB VBUS is always on except for the OTG port */
        status = "okay";
+       usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
+       usb0_vbus-supply = <&reg_usb0_vbus>;
 };