Bluetooth: add support for atheros 0930:0219

Add support for the AR3012 chip found on the Toshiba Sallite M840-1000-XQ.

usb-devices shows:

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0930 ProdID=0219 Rev=00.02
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index f0f62021227fcb0d27324f9391ccad758787a534..10308cd8a7ed2276f146c86c752383de5517464a 100644 (file)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -78,6 +78,7 @@ static struct usb_device_id ath3k_table[] = {
        { USB_DEVICE(0x04CA, 0x3005) },
        { USB_DEVICE(0x13d3, 0x3362) },
        { USB_DEVICE(0x0CF3, 0xE004) },
+       { USB_DEVICE(0x0930, 0x0219) },
 
        /* Atheros AR5BBU12 with sflash firmware */
        { USB_DEVICE(0x0489, 0xE02C) },
@@ -102,6 +103,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
        { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+       { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 
        /* Atheros AR5BBU22 with sflash firmware */
        { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index ff3eabc45ff596823df309632523113968d5922a..83ebb241bfcc8bbd1f279875141f58325bbd09c3 100644 (file)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -140,6 +140,7 @@ static struct usb_device_id blacklist_table[] = {
        { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+       { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 
        /* Atheros AR5BBU12 with sflash firmware */
        { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },