ath9k: Fix bug in starting ani
authorVasanthakumar Thiagarajan <vasanth@atheros.com>
Wed, 23 Jun 2010 13:49:21 +0000 (06:49 -0700)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 23 Jun 2010 19:28:42 +0000 (15:28 -0400)
There are few places where ANI is started without checking
if it is right to start. This might lead to a case where ani
timer would be left undeleted and cause improper memory acccess
during module unload. This bug is clearly exposed with
paprd support where the driver detects tx hang and does a
chip reset. During this reset ani is (re)started without checking
if it needs to be started. This would leave a timer scheduled
even after all the resources are freed and cause a panic.

This patch introduces a bit in sc_flags to indicate if ani
needs to be started in sw_scan_start() and ath_reset().
This would fix the following panic. This issue is easily seen
with ar9003 + paprd.

 BUG: unable to handle kernel paging request at 0000000000003f38
[<ffffffff81075391>] ? __queue_work+0x41/0x50
[<ffffffff8106afaa>] run_timer_softirq+0x17a/0x370
[<ffffffff81088be8>] ? tick_dev_program_event+0x48/0x110
[<ffffffff81061f69>] __do_softirq+0xb9/0x1f0
[<ffffffff810ba060>] ? handle_IRQ_event+0x50/0x160
[<ffffffff8100af5c>] call_softirq+0x1c/0x30
[<ffffffff8100c9f5>] do_softirq+0x65/0xa0
[<ffffffff81061e25>] irq_exit+0x85/0x90
[<ffffffff8155e095>] do_IRQ+0x75/0xf0
[<ffffffff815570d3>] ret_from_intr+0x0/0x11
<EOI>
[<ffffffff812fd67b>] ? acpi_idle_enter_simple+0xe4/0x119
[<ffffffff812fd674>] ? acpi_idle_enter_simple+0xdd/0x119
[<ffffffff81441c87>] cpuidle_idle_call+0xa7/0x140
[<ffffffff81008da3>] cpu_idle+0xb3/0x110
[<ffffffff81550722>] start_secondary+0x1ee/0x1f5

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath9k/ath9k.h
drivers/net/wireless/ath/ath9k/main.c

index fbb7dec6ddebc11beb49a7b57b6e7342b38f9188..5ea87736a6ae49e0fa5ffe764241b7f72722bb2f 100644 (file)
@@ -445,6 +445,7 @@ void ath_deinit_leds(struct ath_softc *sc);
 #define SC_OP_TSF_RESET              BIT(11)
 #define SC_OP_BT_PRIORITY_DETECTED   BIT(12)
 #define SC_OP_BT_SCAN               BIT(13)
+#define SC_OP_ANI_RUN               BIT(14)
 
 /* Powersave flags */
 #define PS_WAIT_FOR_BEACON        BIT(0)
index abfa0493236f5a8c5f785d0126a26c9c0cba45bc..1e2a68ea935597a6f3f9499693a59ab8e191841f 100644 (file)
@@ -336,6 +336,10 @@ set_timer:
 static void ath_start_ani(struct ath_common *common)
 {
        unsigned long timestamp = jiffies_to_msecs(jiffies);
+       struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+       if (!(sc->sc_flags & SC_OP_ANI_RUN))
+               return;
 
        common->ani.longcal_timer = timestamp;
        common->ani.shortcal_timer = timestamp;
@@ -872,11 +876,13 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
                /* Reset rssi stats */
                sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
 
+               sc->sc_flags |= SC_OP_ANI_RUN;
                ath_start_ani(common);
        } else {
                ath_print(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
                common->curaid = 0;
                /* Stop ANI */
+               sc->sc_flags &= ~SC_OP_ANI_RUN;
                del_timer_sync(&common->ani.timer);
        }
 }
@@ -1478,8 +1484,10 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 
        if (vif->type == NL80211_IFTYPE_AP    ||
            vif->type == NL80211_IFTYPE_ADHOC ||
-           vif->type == NL80211_IFTYPE_MONITOR)
+           vif->type == NL80211_IFTYPE_MONITOR) {
+               sc->sc_flags |= SC_OP_ANI_RUN;
                ath_start_ani(common);
+       }
 
 out:
        mutex_unlock(&sc->mutex);
@@ -1500,6 +1508,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
        mutex_lock(&sc->mutex);
 
        /* Stop ANI */
+       sc->sc_flags &= ~SC_OP_ANI_RUN;
        del_timer_sync(&common->ani.timer);
 
        /* Reclaim beacon resources */