/* Store the Adapter structure */
filp->private_data = pTarang;
- /*Start Queuing the control response Packets*/
+ /* Start Queuing the control response Packets */
atomic_inc(&Adapter->ApplicationRunning);
nonseekable_open(inode, filp);
up(&Adapter->RxAppControlQueuelock);
- /*Stop Queuing the control response Packets*/
+ /* Stop Queuing the control response Packets */
atomic_dec(&Adapter->ApplicationRunning);
kfree(pTarang);
PPER_TARANG_DATA pTarang = filp->private_data;
PMINI_ADAPTER Adapter = pTarang->Adapter;
struct sk_buff *Packet = NULL;
- ssize_t PktLen = 0;
- int wait_ret_val = 0;
+ ssize_t PktLen = 0;
+ int wait_ret_val = 0;
unsigned long ret = 0;
wait_ret_val = wait_event_interruptible(Adapter->process_read_wait_queue,
{
PPER_TARANG_DATA pTarang = filp->private_data;
void __user *argp = (void __user *)arg;
- PMINI_ADAPTER Adapter = pTarang->Adapter;
- INT Status = STATUS_FAILURE;
+ PMINI_ADAPTER Adapter = pTarang->Adapter;
+ INT Status = STATUS_FAILURE;
int timeout = 0;
- IOCTL_BUFFER IoBuffer;
+ IOCTL_BUFFER IoBuffer;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Parameters Passed to control IOCTL cmd=0x%X arg=0x%lX", cmd, arg);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Parameters Passed to control IOCTL cmd=0x%X arg=0x%lX", cmd, arg);
- if(_IOC_TYPE(cmd) != BCM_IOCTL)
+ if (_IOC_TYPE(cmd) != BCM_IOCTL)
return -EFAULT;
- if(_IOC_DIR(cmd) & _IOC_READ)
+ if (_IOC_DIR(cmd) & _IOC_READ)
Status = !access_ok(VERIFY_WRITE, argp, _IOC_SIZE(cmd));
else if (_IOC_DIR(cmd) & _IOC_WRITE)
- Status = !access_ok(VERIFY_READ, argp, _IOC_SIZE(cmd));
+ Status = !access_ok(VERIFY_READ, argp, _IOC_SIZE(cmd));
else if (_IOC_NONE == (_IOC_DIR(cmd) & _IOC_NONE))
- Status = STATUS_SUCCESS;
+ Status = STATUS_SUCCESS;
- if(Status)
+ if (Status)
return -EFAULT;
- if(Adapter->device_removed)
- {
+ if (Adapter->device_removed)
return -EFAULT;
- }
- if(FALSE == Adapter->fw_download_done)
- {
- switch (cmd)
- {
- case IOCTL_MAC_ADDR_REQ:
- case IOCTL_LINK_REQ:
- case IOCTL_CM_REQUEST:
- case IOCTL_SS_INFO_REQ:
- case IOCTL_SEND_CONTROL_MESSAGE:
- case IOCTL_IDLE_REQ:
- case IOCTL_BCM_GPIO_SET_REQUEST:
- case IOCTL_BCM_GPIO_STATUS_REQUEST:
- return -EACCES;
- default:
- break;
+ if (FALSE == Adapter->fw_download_done) {
+ switch (cmd) {
+ case IOCTL_MAC_ADDR_REQ:
+ case IOCTL_LINK_REQ:
+ case IOCTL_CM_REQUEST:
+ case IOCTL_SS_INFO_REQ:
+ case IOCTL_SEND_CONTROL_MESSAGE:
+ case IOCTL_IDLE_REQ:
+ case IOCTL_BCM_GPIO_SET_REQUEST:
+ case IOCTL_BCM_GPIO_STATUS_REQUEST:
+ return -EACCES;
+ default:
+ break;
}
}
Status = vendorextnIoctl(Adapter, cmd, arg);
- if(Status != CONTINUE_COMMON_PATH )
- return Status;
-
- switch(cmd){
- // Rdms for Swin Idle...
- case IOCTL_BCM_REGISTER_READ_PRIVATE:
- {
- RDM_BUFFER sRdmBuffer = {0};
- PCHAR temp_buff;
- UINT Bufflen;
+ if (Status != CONTINUE_COMMON_PATH)
+ return Status;
+
+ switch (cmd) {
+ /* Rdms for Swin Idle... */
+ case IOCTL_BCM_REGISTER_READ_PRIVATE: {
+ RDM_BUFFER sRdmBuffer = {0};
+ PCHAR temp_buff;
+ UINT Bufflen;
+
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- /* Copy Ioctl Buffer structure */
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ if (IoBuffer.InputLength > sizeof(sRdmBuffer))
+ return -EINVAL;
- if (IoBuffer.InputLength > sizeof(sRdmBuffer))
- return -EINVAL;
+ if (copy_from_user(&sRdmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- if(copy_from_user(&sRdmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ /* FIXME: need to restrict BuffLen */
+ Bufflen = IoBuffer.OutputLength + (4 - IoBuffer.OutputLength%4)%4;
+ temp_buff = kmalloc(Bufflen, GFP_KERNEL);
+ if (!temp_buff)
+ return -ENOMEM;
- /* FIXME: need to restrict BuffLen */
- Bufflen = IoBuffer.OutputLength + (4 - IoBuffer.OutputLength%4)%4;
- temp_buff = kmalloc(Bufflen, GFP_KERNEL);
- if(!temp_buff)
- return -ENOMEM;
+ Status = rdmalt(Adapter, (UINT)sRdmBuffer.Register,
+ (PUINT)temp_buff, Bufflen);
+ if (Status == STATUS_SUCCESS) {
+ if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, IoBuffer.OutputLength))
+ Status = -EFAULT;
+ }
- Status = rdmalt(Adapter, (UINT)sRdmBuffer.Register,
- (PUINT)temp_buff, Bufflen);
- if(Status == STATUS_SUCCESS)
- {
- if(copy_to_user(IoBuffer.OutputBuffer, temp_buff, IoBuffer.OutputLength))
- Status = -EFAULT;
- }
+ kfree(temp_buff);
+ break;
+ }
- kfree(temp_buff);
- break;
- }
- case IOCTL_BCM_REGISTER_WRITE_PRIVATE:
- {
- WRM_BUFFER sWrmBuffer = {0};
- UINT uiTempVar=0;
- /* Copy Ioctl Buffer structure */
+ case IOCTL_BCM_REGISTER_WRITE_PRIVATE: {
+ WRM_BUFFER sWrmBuffer = {0};
+ UINT uiTempVar = 0;
+ /* Copy Ioctl Buffer structure */
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- if (IoBuffer.InputLength > sizeof(sWrmBuffer))
- return -EINVAL;
+ if (IoBuffer.InputLength > sizeof(sWrmBuffer))
+ return -EINVAL;
- /* Get WrmBuffer structure */
- if(copy_from_user(&sWrmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ /* Get WrmBuffer structure */
+ if (copy_from_user(&sWrmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- uiTempVar = sWrmBuffer.Register & EEPROM_REJECT_MASK;
- if(!((Adapter->pstargetparams->m_u32Customize) & VSG_MODE) &&
- ((uiTempVar == EEPROM_REJECT_REG_1)||
+ uiTempVar = sWrmBuffer.Register & EEPROM_REJECT_MASK;
+ if (!((Adapter->pstargetparams->m_u32Customize) & VSG_MODE) &&
+ ((uiTempVar == EEPROM_REJECT_REG_1) ||
(uiTempVar == EEPROM_REJECT_REG_2) ||
(uiTempVar == EEPROM_REJECT_REG_3) ||
- (uiTempVar == EEPROM_REJECT_REG_4)))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n");
- return -EFAULT;
- }
- Status = wrmalt(Adapter, (UINT)sWrmBuffer.Register,
- (PUINT)sWrmBuffer.Data, sizeof(ULONG));
- if(Status == STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"WRM Done\n");
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Failed\n");
- Status = -EFAULT;
- }
- break;
+ (uiTempVar == EEPROM_REJECT_REG_4))) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n");
+ return -EFAULT;
}
- case IOCTL_BCM_REGISTER_READ:
- case IOCTL_BCM_EEPROM_REGISTER_READ:
- {
- RDM_BUFFER sRdmBuffer = {0};
- PCHAR temp_buff = NULL;
- UINT uiTempVar = 0;
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Device in Idle Mode, Blocking Rdms\n");
- return -EACCES;
- }
- /* Copy Ioctl Buffer structure */
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ Status = wrmalt(Adapter, (UINT)sWrmBuffer.Register,
+ (PUINT)sWrmBuffer.Data, sizeof(ULONG));
- if (IoBuffer.InputLength > sizeof(sRdmBuffer))
- return -EINVAL;
+ if (Status == STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Done\n");
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Failed\n");
+ Status = -EFAULT;
+ }
+ break;
+ }
- if(copy_from_user(&sRdmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ case IOCTL_BCM_REGISTER_READ:
+ case IOCTL_BCM_EEPROM_REGISTER_READ: {
+ RDM_BUFFER sRdmBuffer = {0};
+ PCHAR temp_buff = NULL;
+ UINT uiTempVar = 0;
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle Mode, Blocking Rdms\n");
+ return -EACCES;
+ }
- /* FIXME: don't trust user supplied length */
- temp_buff = kmalloc(IoBuffer.OutputLength, GFP_KERNEL);
- if(!temp_buff)
- return STATUS_FAILURE;
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
+
+ if (IoBuffer.InputLength > sizeof(sRdmBuffer))
+ return -EINVAL;
+
+ if (copy_from_user(&sRdmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- if((((ULONG)sRdmBuffer.Register & 0x0F000000) != 0x0F000000) ||
- ((ULONG)sRdmBuffer.Register & 0x3))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "RDM Done On invalid Address : %x Access Denied.\n",
+ /* FIXME: don't trust user supplied length */
+ temp_buff = kmalloc(IoBuffer.OutputLength, GFP_KERNEL);
+ if (!temp_buff)
+ return STATUS_FAILURE;
+
+ if ((((ULONG)sRdmBuffer.Register & 0x0F000000) != 0x0F000000) ||
+ ((ULONG)sRdmBuffer.Register & 0x3)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM Done On invalid Address : %x Access Denied.\n",
(int)sRdmBuffer.Register);
- return -EINVAL;
- }
+ return -EINVAL;
+ }
- uiTempVar = sRdmBuffer.Register & EEPROM_REJECT_MASK;
- Status = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register,
- (PUINT)temp_buff, IoBuffer.OutputLength);
- if(Status == STATUS_SUCCESS)
- if(copy_to_user(IoBuffer.OutputBuffer, temp_buff, IoBuffer.OutputLength))
- Status = -EFAULT;
+ uiTempVar = sRdmBuffer.Register & EEPROM_REJECT_MASK;
+ Status = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register, (PUINT)temp_buff, IoBuffer.OutputLength);
- kfree(temp_buff);
- break;
+ if (Status == STATUS_SUCCESS)
+ if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, IoBuffer.OutputLength))
+ Status = -EFAULT;
+
+ kfree(temp_buff);
+ break;
+ }
+ case IOCTL_BCM_REGISTER_WRITE:
+ case IOCTL_BCM_EEPROM_REGISTER_WRITE: {
+ WRM_BUFFER sWrmBuffer = {0};
+ UINT uiTempVar = 0;
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle Mode, Blocking Wrms\n");
+ return -EACCES;
}
- case IOCTL_BCM_REGISTER_WRITE:
- case IOCTL_BCM_EEPROM_REGISTER_WRITE:
- {
- WRM_BUFFER sWrmBuffer = {0};
- UINT uiTempVar=0;
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Device in Idle Mode, Blocking Wrms\n");
- return -EACCES;
- }
- /* Copy Ioctl Buffer structure */
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- if (IoBuffer.InputLength > sizeof(sWrmBuffer))
- return -EINVAL;
+ if (IoBuffer.InputLength > sizeof(sWrmBuffer))
+ return -EINVAL;
- /* Get WrmBuffer structure */
- if(copy_from_user(&sWrmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ /* Get WrmBuffer structure */
+ if (copy_from_user(&sWrmBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- if( (((ULONG)sWrmBuffer.Register & 0x0F000000) != 0x0F000000) ||
- ((ULONG)sWrmBuffer.Register & 0x3) )
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "WRM Done On invalid Address : %x Access Denied.\n",
- (int)sWrmBuffer.Register);
- return -EINVAL;
- }
+ if ((((ULONG)sWrmBuffer.Register & 0x0F000000) != 0x0F000000) ||
+ ((ULONG)sWrmBuffer.Register & 0x3)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Done On invalid Address : %x Access Denied.\n", (int)sWrmBuffer.Register);
+ return -EINVAL;
+ }
- uiTempVar = sWrmBuffer.Register & EEPROM_REJECT_MASK;
- if(!((Adapter->pstargetparams->m_u32Customize) & VSG_MODE) &&
- ((uiTempVar == EEPROM_REJECT_REG_1)||
+ uiTempVar = sWrmBuffer.Register & EEPROM_REJECT_MASK;
+ if (!((Adapter->pstargetparams->m_u32Customize) & VSG_MODE) &&
+ ((uiTempVar == EEPROM_REJECT_REG_1) ||
(uiTempVar == EEPROM_REJECT_REG_2) ||
(uiTempVar == EEPROM_REJECT_REG_3) ||
(uiTempVar == EEPROM_REJECT_REG_4)) &&
- (cmd == IOCTL_BCM_REGISTER_WRITE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n");
+ (cmd == IOCTL_BCM_REGISTER_WRITE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n");
return -EFAULT;
- }
+ }
- Status = wrmaltWithLock(Adapter, (UINT)sWrmBuffer.Register,
- (PUINT)sWrmBuffer.Data, sWrmBuffer.Length);
- if(Status == STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, OSAL_DBG, DBG_LVL_ALL, "WRM Done\n");
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Failed\n");
- Status = -EFAULT;
- }
+ Status = wrmaltWithLock(Adapter, (UINT)sWrmBuffer.Register,
+ (PUINT)sWrmBuffer.Data, sWrmBuffer.Length);
+
+ if (Status == STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG, DBG_LVL_ALL, "WRM Done\n");
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Failed\n");
+ Status = -EFAULT;
+ }
+ break;
+ }
+ case IOCTL_BCM_GPIO_SET_REQUEST: {
+ UCHAR ucResetValue[4];
+ UINT value = 0;
+ UINT uiBit = 0;
+ UINT uiOperation = 0;
+
+ GPIO_INFO gpio_info = {0};
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "GPIO Can't be set/clear in Low power Mode");
+ return -EACCES;
+ }
+
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
+
+ if (IoBuffer.InputLength > sizeof(gpio_info))
+ return -EINVAL;
+
+ if (copy_from_user(&gpio_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
+
+ uiBit = gpio_info.uiGpioNumber;
+ uiOperation = gpio_info.uiGpioValue;
+ value = (1<<uiBit);
+
+ if (IsReqGpioIsLedInNVM(Adapter, value) == FALSE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!", value);
+ Status = -EINVAL;
break;
}
- case IOCTL_BCM_GPIO_SET_REQUEST:
- {
- UCHAR ucResetValue[4];
- UINT value =0;
- UINT uiBit = 0;
- UINT uiOperation = 0;
-
- GPIO_INFO gpio_info = {0};
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"GPIO Can't be set/clear in Low power Mode");
- return -EACCES;
- }
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
- if (IoBuffer.InputLength > sizeof(gpio_info))
- return -EINVAL;
- if(copy_from_user(&gpio_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
- uiBit = gpio_info.uiGpioNumber;
- uiOperation = gpio_info.uiGpioValue;
- value= (1<<uiBit);
+ /* Set - setting 1 */
+ if (uiOperation) {
+ /* Set the gpio output register */
+ Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, (PUINT)(&value), sizeof(UINT));
- if(IsReqGpioIsLedInNVM(Adapter,value) ==FALSE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!",value);
- Status = -EINVAL;
+ if (Status == STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO bit\n");
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to set the %dth GPIO\n", uiBit);
+ break;
+ }
+ } else {
+ /* Set the gpio output register */
+ Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, (PUINT)(&value), sizeof(UINT));
+
+ if (Status == STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO bit\n");
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to clear the %dth GPIO\n", uiBit);
break;
}
+ }
+ Status = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
- if(uiOperation)//Set - setting 1
- {
- //Set the gpio output register
- Status = wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_SET_REG ,
- (PUINT)(&value), sizeof(UINT));
- if(Status == STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO bit\n");
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Failed to set the %dth GPIO \n",uiBit);
- break;
- }
- }
- else//Unset - setting 0
- {
- //Set the gpio output register
- Status = wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_CLR_REG ,
- (PUINT)(&value), sizeof(UINT));
- if(Status == STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Set the GPIO bit\n");
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Failed to clear the %dth GPIO \n",uiBit);
- break;
- }
- }
+ if (STATUS_SUCCESS != Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "GPIO_MODE_REGISTER read failed");
+ break;
+ }
- Status = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER,
+ /* Set the gpio mode register to output */
+ *(UINT *)ucResetValue |= (1<<uiBit);
+ Status = wrmaltWithLock(Adapter, GPIO_MODE_REGISTER,
(PUINT)ucResetValue, sizeof(UINT));
- if (STATUS_SUCCESS != Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"GPIO_MODE_REGISTER read failed");
- break;
- }
- //Set the gpio mode register to output
- *(UINT*)ucResetValue |= (1<<uiBit);
- Status = wrmaltWithLock(Adapter,GPIO_MODE_REGISTER ,
- (PUINT)ucResetValue, sizeof(UINT));
- if(Status == STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Set the GPIO to output Mode\n");
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to put GPIO in Output Mode\n");
- break;
- }
+
+ if (Status == STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO to output Mode\n");
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to put GPIO in Output Mode\n");
+ break;
}
- break;
- case BCM_LED_THREAD_STATE_CHANGE_REQ:
- {
- USER_THREAD_REQ threadReq = { 0 };
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"User made LED thread InActive");
-
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"GPIO Can't be set/clear in Low power Mode");
- Status = -EACCES;
- break;
+ }
+ break;
+
+ case BCM_LED_THREAD_STATE_CHANGE_REQ: {
+ USER_THREAD_REQ threadReq = {0};
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "User made LED thread InActive");
+
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "GPIO Can't be set/clear in Low power Mode");
+ Status = -EACCES;
+ break;
+ }
+
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
+
+ if (IoBuffer.InputLength > sizeof(threadReq))
+ return -EINVAL;
+
+ if (copy_from_user(&threadReq, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
+
+ /* if LED thread is running(Actively or Inactively) set it state to make inactive */
+ if (Adapter->LEDInfo.led_thread_running) {
+ if (threadReq.ThreadState == LED_THREAD_ACTIVATION_REQ) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Activating thread req");
+ Adapter->DriverState = LED_THREAD_ACTIVE;
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DeActivating Thread req.....");
+ Adapter->DriverState = LED_THREAD_INACTIVE;
}
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ /* signal thread. */
+ wake_up(&Adapter->LEDInfo.notify_led_event);
+ }
+ }
+ break;
- if (IoBuffer.InputLength > sizeof(threadReq))
- return -EINVAL;
+ case IOCTL_BCM_GPIO_STATUS_REQUEST: {
+ ULONG uiBit = 0;
+ UCHAR ucRead[4];
+ GPIO_INFO gpio_info = {0};
- if (copy_from_user(&threadReq, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE))
+ return -EACCES;
- //if LED thread is running(Actively or Inactively) set it state to make inactive
- if(Adapter->LEDInfo.led_thread_running)
- {
- if(threadReq.ThreadState == LED_THREAD_ACTIVATION_REQ)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Activating thread req");
- Adapter->DriverState = LED_THREAD_ACTIVE;
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"DeActivating Thread req.....");
- Adapter->DriverState = LED_THREAD_INACTIVE;
- }
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- //signal thread.
- wake_up(&Adapter->LEDInfo.notify_led_event);
+ if (IoBuffer.InputLength > sizeof(gpio_info))
+ return -EINVAL;
+
+ if (copy_from_user(&gpio_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
+
+ uiBit = gpio_info.uiGpioNumber;
+
+ /* Set the gpio output register */
+ Status = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER,
+ (PUINT)ucRead, sizeof(UINT));
+
+ if (Status != STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM Failed\n");
+ return Status;
+ }
+ }
+ break;
+ case IOCTL_BCM_GPIO_MULTI_REQUEST: {
+ UCHAR ucResetValue[4];
+ GPIO_MULTI_INFO gpio_multi_info[MAX_IDX];
+ PGPIO_MULTI_INFO pgpio_multi_info = (PGPIO_MULTI_INFO)gpio_multi_info;
+
+ memset(pgpio_multi_info, 0, MAX_IDX * sizeof(GPIO_MULTI_INFO));
+
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE))
+ return -EINVAL;
+
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
+
+ if (IoBuffer.InputLength > sizeof(gpio_multi_info))
+ return -EINVAL;
+
+ if (copy_from_user(&gpio_multi_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
+
+ if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_info[WIMAX_IDX].uiGPIOMask) == FALSE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",
+ pgpio_multi_info[WIMAX_IDX].uiGPIOMask, Adapter->gpioBitMap);
+ Status = -EINVAL;
+ break;
+ }
+
+ /* Set the gpio output register */
+ if ((pgpio_multi_info[WIMAX_IDX].uiGPIOMask) &
+ (pgpio_multi_info[WIMAX_IDX].uiGPIOCommand)) {
+ /* Set 1's in GPIO OUTPUT REGISTER */
+ *(UINT *)ucResetValue = pgpio_multi_info[WIMAX_IDX].uiGPIOMask &
+ pgpio_multi_info[WIMAX_IDX].uiGPIOCommand &
+ pgpio_multi_info[WIMAX_IDX].uiGPIOValue;
+
+ if (*(UINT *) ucResetValue)
+ Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG,
+ (PUINT)ucResetValue, sizeof(ULONG));
+
+ if (Status != STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to BCM_GPIO_OUTPUT_SET_REG Failed.");
+ return Status;
+ }
+
+ /* Clear to 0's in GPIO OUTPUT REGISTER */
+ *(UINT *)ucResetValue = (pgpio_multi_info[WIMAX_IDX].uiGPIOMask &
+ pgpio_multi_info[WIMAX_IDX].uiGPIOCommand &
+ (~(pgpio_multi_info[WIMAX_IDX].uiGPIOValue)));
+
+ if (*(UINT *) ucResetValue)
+ Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, (PUINT)ucResetValue, sizeof(ULONG));
+
+ if (Status != STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to BCM_GPIO_OUTPUT_CLR_REG Failed.");
+ return Status;
}
}
- break;
- case IOCTL_BCM_GPIO_STATUS_REQUEST:
- {
- ULONG uiBit = 0;
- UCHAR ucRead[4];
- GPIO_INFO gpio_info = {0};
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- return -EACCES;
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
- if (IoBuffer.InputLength > sizeof(gpio_info))
- return -EINVAL;
- if(copy_from_user(&gpio_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
- uiBit = gpio_info.uiGpioNumber;
- //Set the gpio output register
- Status = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER,
- (PUINT)ucRead, sizeof(UINT));
- if(Status != STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "RDM Failed\n");
- return Status;
- }
+ if (pgpio_multi_info[WIMAX_IDX].uiGPIOMask) {
+ Status = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
+
+ if (Status != STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM to GPIO_PIN_STATE_REGISTER Failed.");
+ return Status;
}
+
+ pgpio_multi_info[WIMAX_IDX].uiGPIOValue = (*(UINT *)ucResetValue &
+ pgpio_multi_info[WIMAX_IDX].uiGPIOMask);
+ }
+
+ Status = copy_to_user(IoBuffer.OutputBuffer, &gpio_multi_info, IoBuffer.OutputLength);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Failed while copying Content to IOBufer for user space err:%d", Status);
break;
- case IOCTL_BCM_GPIO_MULTI_REQUEST:
- {
- UCHAR ucResetValue[4];
- GPIO_MULTI_INFO gpio_multi_info[MAX_IDX];
- PGPIO_MULTI_INFO pgpio_multi_info = (PGPIO_MULTI_INFO)gpio_multi_info;
-
- memset( pgpio_multi_info, 0, MAX_IDX * sizeof( GPIO_MULTI_INFO));
-
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- return -EINVAL;
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
- if (IoBuffer.InputLength > sizeof(gpio_multi_info))
- return -EINVAL;
- if (copy_from_user(&gpio_multi_info, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ }
+ }
+ break;
- if(IsReqGpioIsLedInNVM(Adapter,pgpio_multi_info[WIMAX_IDX].uiGPIOMask)== FALSE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",pgpio_multi_info[WIMAX_IDX].uiGPIOMask,Adapter->gpioBitMap);
- Status = -EINVAL;
- break;
- }
+ case IOCTL_BCM_GPIO_MODE_REQUEST: {
+ UCHAR ucResetValue[4];
+ GPIO_MULTI_MODE gpio_multi_mode[MAX_IDX];
+ PGPIO_MULTI_MODE pgpio_multi_mode = (PGPIO_MULTI_MODE)gpio_multi_mode;
- /* Set the gpio output register */
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE))
+ return -EINVAL;
- if( ( pgpio_multi_info[WIMAX_IDX].uiGPIOMask) &
- ( pgpio_multi_info[WIMAX_IDX].uiGPIOCommand))
- {
- /* Set 1's in GPIO OUTPUT REGISTER */
- *(UINT*) ucResetValue = pgpio_multi_info[WIMAX_IDX].uiGPIOMask &
- pgpio_multi_info[WIMAX_IDX].uiGPIOCommand &
- pgpio_multi_info[WIMAX_IDX].uiGPIOValue;
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- if( *(UINT*) ucResetValue)
- Status = wrmaltWithLock( Adapter, BCM_GPIO_OUTPUT_SET_REG , (PUINT) ucResetValue, sizeof(ULONG));
+ if (IoBuffer.InputLength > sizeof(gpio_multi_mode))
+ return -EINVAL;
- if( Status != STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to BCM_GPIO_OUTPUT_SET_REG Failed.");
- return Status;
- }
+ if (copy_from_user(&gpio_multi_mode, IoBuffer.InputBuffer, IoBuffer.InputLength))
+ return -EFAULT;
- /* Clear to 0's in GPIO OUTPUT REGISTER */
- *(UINT*) ucResetValue = (pgpio_multi_info[WIMAX_IDX].uiGPIOMask &
- pgpio_multi_info[WIMAX_IDX].uiGPIOCommand &
- ( ~( pgpio_multi_info[WIMAX_IDX].uiGPIOValue)));
+ Status = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
- if( *(UINT*) ucResetValue)
- Status = wrmaltWithLock( Adapter, BCM_GPIO_OUTPUT_CLR_REG , (PUINT) ucResetValue, sizeof(ULONG));
+ if (STATUS_SUCCESS != Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Read of GPIO_MODE_REGISTER failed");
+ return Status;
+ }
- if( Status != STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to BCM_GPIO_OUTPUT_CLR_REG Failed." );
- return Status;
- }
- }
+ /* Validating the request */
+ if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_mode[WIMAX_IDX].uiGPIOMask) == FALSE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",
+ pgpio_multi_mode[WIMAX_IDX].uiGPIOMask, Adapter->gpioBitMap);
+ Status = -EINVAL;
+ break;
+ }
- if( pgpio_multi_info[WIMAX_IDX].uiGPIOMask)
- {
- Status = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
+ if (pgpio_multi_mode[WIMAX_IDX].uiGPIOMask) {
+ /* write all OUT's (1's) */
+ *(UINT *) ucResetValue |= (pgpio_multi_mode[WIMAX_IDX].uiGPIOMode &
+ pgpio_multi_mode[WIMAX_IDX].uiGPIOMask);
+
+ /* write all IN's (0's) */
+ *(UINT *) ucResetValue &= ~((~pgpio_multi_mode[WIMAX_IDX].uiGPIOMode) &
+ pgpio_multi_mode[WIMAX_IDX].uiGPIOMask);
+
+ /* Currently implemented return the modes of all GPIO's
+ * else needs to bit AND with mask
+ */
+ pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)ucResetValue;
+
+ Status = wrmaltWithLock(Adapter, GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(ULONG));
+ if (Status == STATUS_SUCCESS) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "WRM to GPIO_MODE_REGISTER Done");
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "WRM to GPIO_MODE_REGISTER Failed");
+ Status = -EFAULT;
+ break;
+ }
+ } else {
+/* if uiGPIOMask is 0 then return mode register configuration */
+ pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)ucResetValue;
+ }
- if(Status != STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM to GPIO_PIN_STATE_REGISTER Failed.");
- return Status;
- }
+ Status = copy_to_user(IoBuffer.OutputBuffer, &gpio_multi_mode, IoBuffer.OutputLength);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Failed while copying Content to IOBufer for user space err:%d", Status);
+ break;
+ }
+ }
+ break;
+
+ case IOCTL_MAC_ADDR_REQ:
+ case IOCTL_LINK_REQ:
+ case IOCTL_CM_REQUEST:
+ case IOCTL_SS_INFO_REQ:
+ case IOCTL_SEND_CONTROL_MESSAGE:
+ case IOCTL_IDLE_REQ: {
+ PVOID pvBuffer = NULL;
+
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- pgpio_multi_info[WIMAX_IDX].uiGPIOValue = ( *(UINT*)ucResetValue &
- pgpio_multi_info[WIMAX_IDX].uiGPIOMask);
- }
+ /* FIXME: don't accept any length from user */
+ pvBuffer = kmalloc(IoBuffer.InputLength, GFP_KERNEL);
+ if (!pvBuffer)
+ return -ENOMEM;
- Status = copy_to_user(IoBuffer.OutputBuffer, &gpio_multi_info, IoBuffer.OutputLength);
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Failed while copying Content to IOBufer for user space err:%d",Status);
- break;
- }
- }
+ if (copy_from_user(pvBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength)) {
+ Status = -EFAULT;
+ kfree(pvBuffer);
break;
- case IOCTL_BCM_GPIO_MODE_REQUEST:
- {
- UCHAR ucResetValue[4];
- GPIO_MULTI_MODE gpio_multi_mode[MAX_IDX];
- PGPIO_MULTI_MODE pgpio_multi_mode = ( PGPIO_MULTI_MODE) gpio_multi_mode;
+ }
+
+ down(&Adapter->LowPowerModeSync);
+ Status = wait_event_interruptible_timeout(Adapter->lowpower_mode_wait_queue,
+ !Adapter->bPreparingForLowPowerMode,
+ (1 * HZ));
+ if (Status == -ERESTARTSYS)
+ goto cntrlEnd;
+
+ if (Adapter->bPreparingForLowPowerMode) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "Preparing Idle Mode is still True - Hence Rejecting control message\n");
+ Status = STATUS_FAILURE;
+ goto cntrlEnd;
+ }
+ Status = CopyBufferToControlPacket(Adapter, (PVOID)pvBuffer);
+
+cntrlEnd:
+ up(&Adapter->LowPowerModeSync);
+ kfree(pvBuffer);
+ break;
+ }
+
+ case IOCTL_BCM_BUFFER_DOWNLOAD_START: {
+ INT NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
+ if (NVMAccess) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+ "IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n");
+ return -EACCES;
+ }
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Starting the firmware download PID =0x%x!!!!\n", current->pid);
+
+ if (!down_trylock(&Adapter->fw_download_sema)) {
+ Adapter->bBinDownloaded = FALSE;
+ Adapter->fw_download_process_pid = current->pid;
+ Adapter->bCfgDownloaded = FALSE;
+ Adapter->fw_download_done = FALSE;
+ netif_carrier_off(Adapter->dev);
+ netif_stop_queue(Adapter->dev);
+ Status = reset_card_proc(Adapter);
+ if (Status) {
+ pr_err(PFX "%s: reset_card_proc Failed!\n", Adapter->dev->name);
+ up(&Adapter->fw_download_sema);
+ up(&Adapter->NVMRdmWrmLock);
+ break;
+ }
+ mdelay(10);
+ } else {
+ Status = -EBUSY;
+ }
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- return -EINVAL;
+ up(&Adapter->NVMRdmWrmLock);
+ break;
+ }
+ case IOCTL_BCM_BUFFER_DOWNLOAD: {
+ FIRMWARE_INFO *psFwInfo = NULL;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Starting the firmware download PID =0x%x!!!!\n", current->pid);
+ do {
+ if (!down_trylock(&Adapter->fw_download_sema)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Invalid way to download buffer. Use Start and then call this!!!\n");
+ Status = -EINVAL;
+ break;
+ }
+
+ /* Copy Ioctl Buffer structure */
if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
return -EFAULT;
- if (IoBuffer.InputLength > sizeof(gpio_multi_mode))
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Length for FW DLD is : %lx\n", IoBuffer.InputLength);
+
+ if (IoBuffer.InputLength > sizeof(FIRMWARE_INFO))
return -EINVAL;
- if (copy_from_user(&gpio_multi_mode, IoBuffer.InputBuffer, IoBuffer.InputLength))
+
+ psFwInfo = kmalloc(sizeof(*psFwInfo), GFP_KERNEL);
+ if (!psFwInfo)
+ return -ENOMEM;
+
+ if (copy_from_user(psFwInfo, IoBuffer.InputBuffer, IoBuffer.InputLength))
return -EFAULT;
- Status = rdmaltWithLock( Adapter, ( UINT) GPIO_MODE_REGISTER, ( PUINT) ucResetValue, sizeof( UINT));
- if( STATUS_SUCCESS != Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Read of GPIO_MODE_REGISTER failed");
- return Status;
- }
+ if (!psFwInfo->pvMappedFirmwareAddress ||
+ (psFwInfo->u32FirmwareLength == 0)) {
- //Validating the request
- if(IsReqGpioIsLedInNVM(Adapter,pgpio_multi_mode[WIMAX_IDX].uiGPIOMask)== FALSE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",pgpio_multi_mode[WIMAX_IDX].uiGPIOMask,Adapter->gpioBitMap);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Something else is wrong %lu\n",
+ psFwInfo->u32FirmwareLength);
Status = -EINVAL;
break;
}
- if( pgpio_multi_mode[WIMAX_IDX].uiGPIOMask)
- {
- /* write all OUT's (1's) */
- *( UINT*) ucResetValue |= ( pgpio_multi_mode[WIMAX_IDX].uiGPIOMode &
- pgpio_multi_mode[WIMAX_IDX].uiGPIOMask);
- /* write all IN's (0's) */
- *( UINT*) ucResetValue &= ~( ( ~pgpio_multi_mode[WIMAX_IDX].uiGPIOMode) &
- pgpio_multi_mode[WIMAX_IDX].uiGPIOMask);
-
- /* Currently implemented return the modes of all GPIO's
- * else needs to bit AND with mask
- * */
- pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT*)ucResetValue;
-
- Status = wrmaltWithLock( Adapter, GPIO_MODE_REGISTER , ( PUINT) ucResetValue, sizeof( ULONG));
- if( Status == STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM to GPIO_MODE_REGISTER Done");
- }
+ Status = bcm_ioctl_fw_download(Adapter, psFwInfo);
+
+ if (Status != STATUS_SUCCESS) {
+ if (psFwInfo->u32StartingAddress == CONFIG_BEGIN_ADDR)
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL: Configuration File Upload Failed\n");
else
- {
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to GPIO_MODE_REGISTER Failed");
- Status = -EFAULT;
- break;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL: Firmware File Upload Failed\n");
+
+ /* up(&Adapter->fw_download_sema); */
+
+ if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
+ Adapter->DriverState = DRIVER_INIT;
+ Adapter->LEDInfo.bLedInitDone = FALSE;
+ wake_up(&Adapter->LEDInfo.notify_led_event);
}
}
- else /* if uiGPIOMask is 0 then return mode register configuration */
- {
- pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *( UINT*) ucResetValue;
- }
- Status = copy_to_user(IoBuffer.OutputBuffer, &gpio_multi_mode, IoBuffer.OutputLength);
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Failed while copying Content to IOBufer for user space err:%d",Status);
+ break;
+
+ } while (0);
+
+ if (Status != STATUS_SUCCESS)
+ up(&Adapter->fw_download_sema);
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG, DBG_LVL_ALL, "IOCTL: Firmware File Uploaded\n");
+ kfree(psFwInfo);
+ break;
+ }
+
+ case IOCTL_BCM_BUFFER_DOWNLOAD_STOP: {
+ INT NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
+
+ if (NVMAccess) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "FW download blocked as EEPROM Read/Write is in progress\n");
+ up(&Adapter->fw_download_sema);
+ return -EACCES;
+ }
+
+ if (down_trylock(&Adapter->fw_download_sema)) {
+ Adapter->bBinDownloaded = TRUE;
+ Adapter->bCfgDownloaded = TRUE;
+ atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
+ Adapter->CurrNumRecvDescs = 0;
+ Adapter->downloadDDR = 0;
+
+ /* setting the Mips to Run */
+ Status = run_card_proc(Adapter);
+
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Firm Download Failed\n");
+ up(&Adapter->fw_download_sema);
+ up(&Adapter->NVMRdmWrmLock);
break;
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+ DBG_LVL_ALL, "Firm Download Over...\n");
}
+
+ mdelay(10);
+
+ /* Wait for MailBox Interrupt */
+ if (StartInterruptUrb((PS_INTERFACE_ADAPTER)Adapter->pvInterfaceAdapter))
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Unable to send interrupt...\n");
+
+ timeout = 5*HZ;
+ Adapter->waiting_to_fw_download_done = FALSE;
+ wait_event_timeout(Adapter->ioctl_fw_dnld_wait_queue,
+ Adapter->waiting_to_fw_download_done, timeout);
+ Adapter->fw_download_process_pid = INVALID_PID;
+ Adapter->fw_download_done = TRUE;
+ atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
+ Adapter->CurrNumRecvDescs = 0;
+ Adapter->PrevNumRecvDescs = 0;
+ atomic_set(&Adapter->cntrlpktCnt, 0);
+ Adapter->LinkUpStatus = 0;
+ Adapter->LinkStatus = 0;
+
+ if (Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) {
+ Adapter->DriverState = FW_DOWNLOAD_DONE;
+ wake_up(&Adapter->LEDInfo.notify_led_event);
+ }
+
+ if (!timeout)
+ Status = -ENODEV;
+ } else {
+ Status = -EINVAL;
}
+
+ up(&Adapter->fw_download_sema);
+ up(&Adapter->NVMRdmWrmLock);
break;
+ }
- case IOCTL_MAC_ADDR_REQ:
- case IOCTL_LINK_REQ:
- case IOCTL_CM_REQUEST:
- case IOCTL_SS_INFO_REQ:
- case IOCTL_SEND_CONTROL_MESSAGE:
- case IOCTL_IDLE_REQ:
- {
- PVOID pvBuffer=NULL;
+ case IOCTL_BE_BUCKET_SIZE:
+ Status = 0;
+ if (get_user(Adapter->BEBucketSize, (unsigned long __user *)arg))
+ Status = -EFAULT;
+ break;
- /* Copy Ioctl Buffer structure */
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ case IOCTL_RTPS_BUCKET_SIZE:
+ Status = 0;
+ if (get_user(Adapter->rtPSBucketSize, (unsigned long __user *)arg))
+ Status = -EFAULT;
+ break;
- /* FIXME: don't accept any length from user */
- pvBuffer = kmalloc(IoBuffer.InputLength, GFP_KERNEL);
- if(!pvBuffer)
- return -ENOMEM;
+ case IOCTL_CHIP_RESET: {
+ INT NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
+ if (NVMAccess) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, " IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n");
+ return -EACCES;
+ }
+
+ down(&Adapter->RxAppControlQueuelock);
+ Status = reset_card_proc(Adapter);
+ flushAllAppQ();
+ up(&Adapter->RxAppControlQueuelock);
+ up(&Adapter->NVMRdmWrmLock);
+ ResetCounters(Adapter);
+ break;
+ }
+
+ case IOCTL_QOS_THRESHOLD: {
+ USHORT uiLoopIndex;
- if(copy_from_user(pvBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
- {
+ Status = 0;
+ for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES; uiLoopIndex++) {
+ if (get_user(Adapter->PackInfo[uiLoopIndex].uiThreshold,
+ (unsigned long __user *)arg)) {
Status = -EFAULT;
- kfree(pvBuffer);
break;
}
+ }
+ break;
+ }
- down(&Adapter->LowPowerModeSync);
- Status = wait_event_interruptible_timeout(Adapter->lowpower_mode_wait_queue,
- !Adapter->bPreparingForLowPowerMode,
- (1 * HZ));
- if(Status == -ERESTARTSYS)
- goto cntrlEnd;
-
- if(Adapter->bPreparingForLowPowerMode)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Preparing Idle Mode is still True - Hence Rejecting control message\n");
- Status = STATUS_FAILURE ;
- goto cntrlEnd ;
- }
- Status = CopyBufferToControlPacket(Adapter, (PVOID)pvBuffer);
- cntrlEnd:
- up(&Adapter->LowPowerModeSync);
- kfree(pvBuffer);
+ case IOCTL_DUMP_PACKET_INFO:
+ DumpPackInfo(Adapter);
+ DumpPhsRules(&Adapter->stBCMPhsContext);
+ Status = STATUS_SUCCESS;
+ break;
+
+ case IOCTL_GET_PACK_INFO:
+ if (copy_to_user(argp, &Adapter->PackInfo, sizeof(PacketInfo)*NO_OF_QUEUES))
+ return -EFAULT;
+ Status = STATUS_SUCCESS;
+ break;
+
+ case IOCTL_BCM_SWITCH_TRANSFER_MODE: {
+ UINT uiData = 0;
+ if (copy_from_user(&uiData, argp, sizeof(UINT)))
+ return -EFAULT;
+
+ if (uiData) {
+ /* Allow All Packets */
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SWITCH_TRANSFER_MODE: ETH_PACKET_TUNNELING_MODE\n");
+ Adapter->TransferMode = ETH_PACKET_TUNNELING_MODE;
+ } else {
+ /* Allow IP only Packets */
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SWITCH_TRANSFER_MODE: IP_PACKET_ONLY_MODE\n");
+ Adapter->TransferMode = IP_PACKET_ONLY_MODE;
+ }
+ Status = STATUS_SUCCESS;
+ break;
+ }
+
+ case IOCTL_BCM_GET_DRIVER_VERSION: {
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
+
+ if (copy_to_user(IoBuffer.OutputBuffer, VER_FILEVERSION_STR, IoBuffer.OutputLength))
+ return -EFAULT;
+ Status = STATUS_SUCCESS;
+ break;
+ }
+
+ case IOCTL_BCM_GET_CURRENT_STATUS: {
+ LINK_STATE link_state;
+
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER))) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "copy_from_user failed..\n");
+ Status = -EFAULT;
break;
}
- case IOCTL_BCM_BUFFER_DOWNLOAD_START:
- {
- INT NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock) ;
- if(NVMAccess)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n");
- return -EACCES;
- }
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Starting the firmware download PID =0x%x!!!!\n", current->pid);
- if(!down_trylock(&Adapter->fw_download_sema))
- {
- Adapter->bBinDownloaded=FALSE;
- Adapter->fw_download_process_pid=current->pid;
- Adapter->bCfgDownloaded=FALSE;
- Adapter->fw_download_done=FALSE;
- netif_carrier_off(Adapter->dev);
- netif_stop_queue(Adapter->dev);
- Status = reset_card_proc(Adapter);
- if(Status)
- {
- pr_err(PFX "%s: reset_card_proc Failed!\n", Adapter->dev->name);
- up(&Adapter->fw_download_sema);
- up(&Adapter->NVMRdmWrmLock);
- break;
- }
- mdelay(10);
- }
- else
- {
- Status = -EBUSY;
+ if (IoBuffer.OutputLength != sizeof(link_state)) {
+ Status = -EINVAL;
+ break;
+ }
- }
- up(&Adapter->NVMRdmWrmLock);
+ memset(&link_state, 0, sizeof(link_state));
+ link_state.bIdleMode = Adapter->IdleMode;
+ link_state.bShutdownMode = Adapter->bShutStatus;
+ link_state.ucLinkStatus = Adapter->LinkStatus;
+
+ if (copy_to_user(IoBuffer.OutputBuffer, &link_state, min_t(size_t, sizeof(link_state), IoBuffer.OutputLength))) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy_to_user Failed..\n");
+ Status = -EFAULT;
break;
}
- case IOCTL_BCM_BUFFER_DOWNLOAD:
- {
- FIRMWARE_INFO *psFwInfo = NULL;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Starting the firmware download PID =0x%x!!!!\n", current->pid);
- do{
- if(!down_trylock(&Adapter->fw_download_sema))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Invalid way to download buffer. Use Start and then call this!!!\n");
- Status=-EINVAL;
- break;
- }
+ Status = STATUS_SUCCESS;
+ break;
+ }
- /* Copy Ioctl Buffer structure */
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ case IOCTL_BCM_SET_MAC_TRACING: {
+ UINT tracing_flag;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Length for FW DLD is : %lx\n",
- IoBuffer.InputLength);
+ /* copy ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- if (IoBuffer.InputLength > sizeof(FIRMWARE_INFO))
- return -EINVAL;
+ if (copy_from_user(&tracing_flag, IoBuffer.InputBuffer, sizeof(UINT)))
+ return -EFAULT;
- psFwInfo = kmalloc(sizeof(*psFwInfo), GFP_KERNEL);
- if(!psFwInfo)
- return -ENOMEM;
+ if (tracing_flag)
+ Adapter->pTarangs->MacTracingEnabled = TRUE;
+ else
+ Adapter->pTarangs->MacTracingEnabled = FALSE;
+ break;
+ }
- if(copy_from_user(psFwInfo, IoBuffer.InputBuffer, IoBuffer.InputLength))
- return -EFAULT;
+ case IOCTL_BCM_GET_DSX_INDICATION: {
+ ULONG ulSFId = 0;
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- if(!psFwInfo->pvMappedFirmwareAddress ||
- (psFwInfo->u32FirmwareLength == 0))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Something else is wrong %lu\n",
- psFwInfo->u32FirmwareLength);
- Status = -EINVAL;
- break;
- }
- Status = bcm_ioctl_fw_download(Adapter, psFwInfo);
- if(Status != STATUS_SUCCESS)
- {
- if(psFwInfo->u32StartingAddress==CONFIG_BEGIN_ADDR)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "IOCTL: Configuration File Upload Failed\n");
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "IOCTL: Firmware File Upload Failed\n");
- }
- //up(&Adapter->fw_download_sema);
+ if (IoBuffer.OutputLength < sizeof(stLocalSFAddIndicationAlt)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Mismatch req: %lx needed is =0x%zx!!!",
+ IoBuffer.OutputLength, sizeof(stLocalSFAddIndicationAlt));
+ return -EINVAL;
+ }
- if(Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY)
- {
- Adapter->DriverState = DRIVER_INIT;
- Adapter->LEDInfo.bLedInitDone = FALSE;
- wake_up(&Adapter->LEDInfo.notify_led_event);
- }
- }
- break ;
- }while(0);
+ if (copy_from_user(&ulSFId, IoBuffer.InputBuffer, sizeof(ulSFId)))
+ return -EFAULT;
- if(Status != STATUS_SUCCESS)
- up(&Adapter->fw_download_sema);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, OSAL_DBG, DBG_LVL_ALL, "IOCTL: Firmware File Uploaded\n");
- kfree(psFwInfo);
- break;
- }
- case IOCTL_BCM_BUFFER_DOWNLOAD_STOP:
- {
- INT NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
- if(NVMAccess)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, " FW download blocked as EEPROM Read/Write is in progress\n");
- up(&Adapter->fw_download_sema);
- return -EACCES;
- }
- if(down_trylock(&Adapter->fw_download_sema))
- {
- Adapter->bBinDownloaded=TRUE;
- Adapter->bCfgDownloaded=TRUE;
- atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
-
- Adapter->CurrNumRecvDescs=0;
- Adapter->downloadDDR = 0;
-
- //setting the Mips to Run
- Status = run_card_proc(Adapter);
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Firm Download Failed\n");
- up(&Adapter->fw_download_sema);
- up(&Adapter->NVMRdmWrmLock);
- break;
- }
- else
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Firm Download Over...\n");
- mdelay(10);
- /* Wait for MailBox Interrupt */
- if(StartInterruptUrb((PS_INTERFACE_ADAPTER)Adapter->pvInterfaceAdapter))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Unable to send interrupt...\n");
- }
- timeout = 5*HZ;
- Adapter->waiting_to_fw_download_done = FALSE;
- wait_event_timeout(Adapter->ioctl_fw_dnld_wait_queue,
- Adapter->waiting_to_fw_download_done, timeout);
- Adapter->fw_download_process_pid=INVALID_PID;
- Adapter->fw_download_done=TRUE;
- atomic_set(&Adapter->CurrNumFreeTxDesc, 0);
- Adapter->CurrNumRecvDescs = 0;
- Adapter->PrevNumRecvDescs = 0;
- atomic_set(&Adapter->cntrlpktCnt,0);
- Adapter->LinkUpStatus = 0;
- Adapter->LinkStatus = 0;
-
- if(Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY)
- {
- Adapter->DriverState = FW_DOWNLOAD_DONE;
- wake_up(&Adapter->LEDInfo.notify_led_event);
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Get DSX Data SF ID is =%lx\n", ulSFId);
+ get_dsx_sf_data_to_application(Adapter, ulSFId, IoBuffer.OutputBuffer);
+ Status = STATUS_SUCCESS;
+ }
+ break;
- if(!timeout)
- {
- Status = -ENODEV;
- }
- }
- else
- {
- Status = -EINVAL;
- }
- up(&Adapter->fw_download_sema);
- up(&Adapter->NVMRdmWrmLock);
- break;
+ case IOCTL_BCM_GET_HOST_MIBS: {
+ PVOID temp_buff;
+
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
+
+ if (IoBuffer.OutputLength != sizeof(S_MIBS_HOST_STATS_MIBS)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+ "Length Check failed %lu %zd\n",
+ IoBuffer.OutputLength, sizeof(S_MIBS_HOST_STATS_MIBS));
+ return -EINVAL;
}
- case IOCTL_BE_BUCKET_SIZE:
- Status = 0;
- if (get_user(Adapter->BEBucketSize, (unsigned long __user *)arg))
- Status = -EFAULT;
- break;
- case IOCTL_RTPS_BUCKET_SIZE:
- Status = 0;
- if (get_user(Adapter->rtPSBucketSize, (unsigned long __user *)arg))
+ /* FIXME: HOST_STATS are too big for kmalloc (122048)! */
+ temp_buff = kzalloc(sizeof(S_MIBS_HOST_STATS_MIBS), GFP_KERNEL);
+ if (!temp_buff)
+ return STATUS_FAILURE;
+
+ Status = ProcessGetHostMibs(Adapter, temp_buff);
+ GetDroppedAppCntrlPktMibs(temp_buff, pTarang);
+
+ if (Status != STATUS_FAILURE)
+ if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, sizeof(S_MIBS_HOST_STATS_MIBS)))
Status = -EFAULT;
- break;
- case IOCTL_CHIP_RESET:
- {
- INT NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
- if(NVMAccess)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, " IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n");
- return -EACCES;
- }
- down(&Adapter->RxAppControlQueuelock);
- Status = reset_card_proc(Adapter);
- flushAllAppQ();
- up(&Adapter->RxAppControlQueuelock);
- up(&Adapter->NVMRdmWrmLock);
- ResetCounters(Adapter);
- break;
+
+ kfree(temp_buff);
+ break;
+ }
+
+ case IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE:
+ if ((FALSE == Adapter->bTriedToWakeUpFromlowPowerMode) && (TRUE == Adapter->IdleMode)) {
+ Adapter->usIdleModePattern = ABORT_IDLE_MODE;
+ Adapter->bWakeUpDevice = TRUE;
+ wake_up(&Adapter->process_rx_cntrlpkt);
}
- case IOCTL_QOS_THRESHOLD:
- {
- USHORT uiLoopIndex;
- Status = 0;
- for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES; uiLoopIndex++) {
- if (get_user(Adapter->PackInfo[uiLoopIndex].uiThreshold,
- (unsigned long __user *)arg)) {
- Status = -EFAULT;
- break;
- }
- }
+ Status = STATUS_SUCCESS;
+ break;
+
+ case IOCTL_BCM_BULK_WRM: {
+ PBULKWRM_BUFFER pBulkBuffer;
+ UINT uiTempVar = 0;
+ PCHAR pvBuffer = NULL;
+
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle/Shutdown Mode, Blocking Wrms\n");
+ Status = -EACCES;
break;
}
- case IOCTL_DUMP_PACKET_INFO:
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- DumpPackInfo(Adapter);
- DumpPhsRules(&Adapter->stBCMPhsContext);
- Status = STATUS_SUCCESS;
+ /* FIXME: restrict length */
+ pvBuffer = kmalloc(IoBuffer.InputLength, GFP_KERNEL);
+ if (!pvBuffer)
+ return -ENOMEM;
+
+ /* Get WrmBuffer structure */
+ if (copy_from_user(pvBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength)) {
+ kfree(pvBuffer);
+ Status = -EFAULT;
break;
+ }
- case IOCTL_GET_PACK_INFO:
- if(copy_to_user(argp, &Adapter->PackInfo, sizeof(PacketInfo)*NO_OF_QUEUES))
- return -EFAULT;
- Status = STATUS_SUCCESS;
+ pBulkBuffer = (PBULKWRM_BUFFER)pvBuffer;
+
+ if (((ULONG)pBulkBuffer->Register & 0x0F000000) != 0x0F000000 ||
+ ((ULONG)pBulkBuffer->Register & 0x3)) {
+ kfree(pvBuffer);
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Done On invalid Address : %x Access Denied.\n", (int)pBulkBuffer->Register);
+ Status = -EINVAL;
break;
- case IOCTL_BCM_SWITCH_TRANSFER_MODE:
- {
- UINT uiData = 0;
- if(copy_from_user(&uiData, argp, sizeof(UINT)))
- return -EFAULT;
+ }
- if(uiData) /* Allow All Packets */
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SWITCH_TRANSFER_MODE: ETH_PACKET_TUNNELING_MODE\n");
- Adapter->TransferMode = ETH_PACKET_TUNNELING_MODE;
- }
- else /* Allow IP only Packets */
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SWITCH_TRANSFER_MODE: IP_PACKET_ONLY_MODE\n");
- Adapter->TransferMode = IP_PACKET_ONLY_MODE;
- }
- Status = STATUS_SUCCESS;
+ uiTempVar = pBulkBuffer->Register & EEPROM_REJECT_MASK;
+ if (!((Adapter->pstargetparams->m_u32Customize)&VSG_MODE) &&
+ ((uiTempVar == EEPROM_REJECT_REG_1) ||
+ (uiTempVar == EEPROM_REJECT_REG_2) ||
+ (uiTempVar == EEPROM_REJECT_REG_3) ||
+ (uiTempVar == EEPROM_REJECT_REG_4)) &&
+ (cmd == IOCTL_BCM_REGISTER_WRITE)) {
+
+ kfree(pvBuffer);
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n");
+ Status = -EFAULT;
break;
}
- case IOCTL_BCM_GET_DRIVER_VERSION:
- {
- /* Copy Ioctl Buffer structure */
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ if (pBulkBuffer->SwapEndian == FALSE)
+ Status = wrmWithLock(Adapter, (UINT)pBulkBuffer->Register, (PCHAR)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
+ else
+ Status = wrmaltWithLock(Adapter, (UINT)pBulkBuffer->Register, (PUINT)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
+
+ if (Status != STATUS_SUCCESS)
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Failed\n");
- if(copy_to_user(IoBuffer.OutputBuffer, VER_FILEVERSION_STR, IoBuffer.OutputLength))
+ kfree(pvBuffer);
+ break;
+ }
+
+ case IOCTL_BCM_GET_NVM_SIZE:
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
+
+ if (Adapter->eNVMType == NVM_EEPROM || Adapter->eNVMType == NVM_FLASH) {
+ if (copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiNVMDSDSize, sizeof(UINT)))
return -EFAULT;
- Status = STATUS_SUCCESS;
- break;
}
- case IOCTL_BCM_GET_CURRENT_STATUS:
- {
- LINK_STATE link_state;
- /* Copy Ioctl Buffer structure */
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "copy_from_user failed..\n");
- Status = -EFAULT;
- break;
- }
- if (IoBuffer.OutputLength != sizeof(link_state)) {
- Status = -EINVAL;
- break;
- }
+ Status = STATUS_SUCCESS;
+ break;
- memset(&link_state, 0, sizeof(link_state));
- link_state.bIdleMode = Adapter->IdleMode;
- link_state.bShutdownMode = Adapter->bShutStatus;
- link_state.ucLinkStatus = Adapter->LinkStatus;
+ case IOCTL_BCM_CAL_INIT: {
+ UINT uiSectorSize = 0 ;
+ if (Adapter->eNVMType == NVM_FLASH) {
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- if (copy_to_user(IoBuffer.OutputBuffer, &link_state,
- min_t(size_t, sizeof(link_state), IoBuffer.OutputLength)))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy_to_user Failed..\n");
- Status = -EFAULT;
- break;
+ if (copy_from_user(&uiSectorSize, IoBuffer.InputBuffer, sizeof(UINT)))
+ return -EFAULT;
+
+ if ((uiSectorSize < MIN_SECTOR_SIZE) || (uiSectorSize > MAX_SECTOR_SIZE)) {
+ if (copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiSectorSize,
+ sizeof(UINT)))
+ return -EFAULT;
+ } else {
+ if (IsFlash2x(Adapter)) {
+ if (copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiSectorSize, sizeof(UINT)))
+ return -EFAULT;
+ } else {
+ if ((TRUE == Adapter->bShutStatus) || (TRUE == Adapter->IdleMode)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device is in Idle/Shutdown Mode\n");
+ return -EACCES;
+ }
+
+ Adapter->uiSectorSize = uiSectorSize;
+ BcmUpdateSectorSize(Adapter, Adapter->uiSectorSize);
+ }
}
Status = STATUS_SUCCESS;
- break;
+ } else {
+ Status = STATUS_FAILURE;
}
- case IOCTL_BCM_SET_MAC_TRACING:
- {
- UINT tracing_flag;
-
- /* copy ioctl Buffer structure */
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
-
- if(copy_from_user(&tracing_flag,IoBuffer.InputBuffer,sizeof(UINT)))
- return -EFAULT;
-
- if (tracing_flag)
- Adapter->pTarangs->MacTracingEnabled = TRUE;
- else
- Adapter->pTarangs->MacTracingEnabled = FALSE;
- break;
- }
- case IOCTL_BCM_GET_DSX_INDICATION:
- {
- ULONG ulSFId=0;
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ }
+ break;
- if(IoBuffer.OutputLength < sizeof(stLocalSFAddIndicationAlt))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,
- "Mismatch req: %lx needed is =0x%zx!!!",
- IoBuffer.OutputLength, sizeof(stLocalSFAddIndicationAlt));
- return -EINVAL;
- }
+ case IOCTL_BCM_SET_DEBUG:
+#ifdef DEBUG
+ {
+ USER_BCM_DBG_STATE sUserDebugState;
- if(copy_from_user(&ulSFId, IoBuffer.InputBuffer, sizeof(ulSFId)))
- return -EFAULT;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "In SET_DEBUG ioctl\n");
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
+
+ if (copy_from_user(&sUserDebugState, IoBuffer.InputBuffer, sizeof(USER_BCM_DBG_STATE)))
+ return -EFAULT;
+
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL_BCM_SET_DEBUG: OnOff=%d Type = 0x%x ",
+ sUserDebugState.OnOff, sUserDebugState.Type);
+ /* sUserDebugState.Subtype <<= 1; */
+ sUserDebugState.Subtype = 1 << sUserDebugState.Subtype;
+ BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "actual Subtype=0x%x\n", sUserDebugState.Subtype);
+
+ /* Update new 'DebugState' in the Adapter */
+ Adapter->stDebugState.type |= sUserDebugState.Type;
+ /* Subtype: A bitmap of 32 bits for Subtype per Type.
+ * Valid indexes in 'subtype' array: 1,2,4,8
+ * corresponding to valid Type values. Hence we can use the 'Type' field
+ * as the index value, ignoring the array entries 0,3,5,6,7 !
+ */
+ if (sUserDebugState.OnOff)
+ Adapter->stDebugState.subtype[sUserDebugState.Type] |= sUserDebugState.Subtype;
+ else
+ Adapter->stDebugState.subtype[sUserDebugState.Type] &= ~sUserDebugState.Subtype;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Get DSX Data SF ID is =%lx\n", ulSFId );
- get_dsx_sf_data_to_application(Adapter, ulSFId, IoBuffer.OutputBuffer);
- Status=STATUS_SUCCESS;
+ BCM_SHOW_DEBUG_BITMAP(Adapter);
+ }
+#endif
+ break;
+
+ case IOCTL_BCM_NVM_READ:
+ case IOCTL_BCM_NVM_WRITE: {
+ NVM_READWRITE stNVMReadWrite;
+ PUCHAR pReadData = NULL;
+ ULONG ulDSDMagicNumInUsrBuff = 0;
+ struct timeval tv0, tv1;
+ memset(&tv0, 0, sizeof(struct timeval));
+ memset(&tv1, 0, sizeof(struct timeval));
+ if ((Adapter->eNVMType == NVM_FLASH) && (Adapter->uiFlashLayoutMajorVersion == 0)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "The Flash Control Section is Corrupted. Hence Rejection on NVM Read/Write\n");
+ Status = -EFAULT;
+ break;
}
- break;
- case IOCTL_BCM_GET_HOST_MIBS:
- {
- PVOID temp_buff;
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ if (IsFlash2x(Adapter)) {
+ if ((Adapter->eActiveDSD != DSD0) &&
+ (Adapter->eActiveDSD != DSD1) &&
+ (Adapter->eActiveDSD != DSD2)) {
- if(IoBuffer.OutputLength != sizeof(S_MIBS_HOST_STATS_MIBS))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,
- "Length Check failed %lu %zd\n",
- IoBuffer.OutputLength, sizeof(S_MIBS_HOST_STATS_MIBS));
- return -EINVAL;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "No DSD is active..hence NVM Command is blocked");
+ return STATUS_FAILURE ;
}
+ }
- /* FIXME: HOST_STATS are too big for kmalloc (122048)! */
- temp_buff = kzalloc(sizeof(S_MIBS_HOST_STATS_MIBS), GFP_KERNEL);
- if(!temp_buff)
- return STATUS_FAILURE;
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- Status = ProcessGetHostMibs(Adapter, temp_buff);
- GetDroppedAppCntrlPktMibs(temp_buff, pTarang);
+ if (copy_from_user(&stNVMReadWrite,
+ (IOCTL_BCM_NVM_READ == cmd) ? IoBuffer.OutputBuffer : IoBuffer.InputBuffer,
+ sizeof(NVM_READWRITE)))
+ return -EFAULT;
- if (Status != STATUS_FAILURE)
- if(copy_to_user(IoBuffer.OutputBuffer, temp_buff, sizeof(S_MIBS_HOST_STATS_MIBS)))
- Status = -EFAULT;
+ /*
+ * Deny the access if the offset crosses the cal area limit.
+ */
- kfree(temp_buff);
+ if ((stNVMReadWrite.uiOffset + stNVMReadWrite.uiNumBytes) > Adapter->uiNVMDSDSize) {
+ /* BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Can't allow access beyond NVM Size: 0x%x 0x%x\n", stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes); */
+ Status = STATUS_FAILURE;
break;
}
- case IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE:
- if((FALSE == Adapter->bTriedToWakeUpFromlowPowerMode) && (TRUE==Adapter->IdleMode))
- {
- Adapter->usIdleModePattern = ABORT_IDLE_MODE;
- Adapter->bWakeUpDevice = TRUE;
- wake_up(&Adapter->process_rx_cntrlpkt);
- }
- Status = STATUS_SUCCESS;
+ pReadData = kzalloc(stNVMReadWrite.uiNumBytes, GFP_KERNEL);
+ if (!pReadData)
+ return -ENOMEM;
+
+ if (copy_from_user(pReadData, stNVMReadWrite.pBuffer, stNVMReadWrite.uiNumBytes)) {
+ Status = -EFAULT;
+ kfree(pReadData);
break;
+ }
- case IOCTL_BCM_BULK_WRM:
- {
- PBULKWRM_BUFFER pBulkBuffer;
- UINT uiTempVar=0;
- PCHAR pvBuffer = NULL;
-
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle/Shutdown Mode, Blocking Wrms\n");
- Status = -EACCES;
- break;
- }
+ do_gettimeofday(&tv0);
+ if (IOCTL_BCM_NVM_READ == cmd) {
+ down(&Adapter->NVMRdmWrmLock);
+
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
+
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadData);
+ return -EACCES;
+ }
+
+ Status = BeceemNVMRead(Adapter, (PUINT)pReadData, stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes);
+ up(&Adapter->NVMRdmWrmLock);
+
+ if (Status != STATUS_SUCCESS) {
+ kfree(pReadData);
+ return Status;
+ }
+
+ if (copy_to_user(stNVMReadWrite.pBuffer, pReadData, stNVMReadWrite.uiNumBytes)) {
+ kfree(pReadData);
+ Status = -EFAULT;
+ }
+ } else {
+ down(&Adapter->NVMRdmWrmLock);
- /* Copy Ioctl Buffer structure */
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
- /* FIXME: restrict length */
- pvBuffer = kmalloc(IoBuffer.InputLength, GFP_KERNEL);
- if(!pvBuffer)
- return -ENOMEM;
-
- /* Get WrmBuffer structure */
- if(copy_from_user(pvBuffer, IoBuffer.InputBuffer, IoBuffer.InputLength))
- {
- kfree(pvBuffer);
- Status = -EFAULT;
- break;
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadData);
+ return -EACCES;
+ }
- pBulkBuffer = (PBULKWRM_BUFFER)pvBuffer;
+ Adapter->bHeaderChangeAllowed = TRUE;
+ if (IsFlash2x(Adapter)) {
+ /*
+ * New Requirement:-
+ * DSD section updation will be allowed in two case:-
+ * 1. if DSD sig is present in DSD header means dongle is ok and updation is fruitfull
+ * 2. if point 1 failes then user buff should have DSD sig. this point ensures that if dongle is
+ * corrupted then user space program first modify the DSD header with valid DSD sig so
+ * that this as well as further write may be worthwhile.
+ *
+ * This restriction has been put assuming that if DSD sig is corrupted, DSD
+ * data won't be considered valid.
+ */
- if(((ULONG)pBulkBuffer->Register & 0x0F000000) != 0x0F000000 ||
- ((ULONG)pBulkBuffer->Register & 0x3))
- {
- kfree(pvBuffer);
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM Done On invalid Address : %x Access Denied.\n",(int)pBulkBuffer->Register);
- Status = -EINVAL;
- break;
- }
+ Status = BcmFlash2xCorruptSig(Adapter, Adapter->eActiveDSD);
+ if (Status != STATUS_SUCCESS) {
+ if (((stNVMReadWrite.uiOffset + stNVMReadWrite.uiNumBytes) != Adapter->uiNVMDSDSize) ||
+ (stNVMReadWrite.uiNumBytes < SIGNATURE_SIZE)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadData);
+ return Status;
+ }
- uiTempVar = pBulkBuffer->Register & EEPROM_REJECT_MASK;
- if(!((Adapter->pstargetparams->m_u32Customize)&VSG_MODE)
- && ((uiTempVar == EEPROM_REJECT_REG_1)||
- (uiTempVar == EEPROM_REJECT_REG_2) ||
- (uiTempVar == EEPROM_REJECT_REG_3) ||
- (uiTempVar == EEPROM_REJECT_REG_4)) &&
- (cmd == IOCTL_BCM_REGISTER_WRITE))
- {
- kfree(pvBuffer);
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0,"EEPROM Access Denied, not in VSG Mode\n");
- Status = -EFAULT;
- break;
+ ulDSDMagicNumInUsrBuff = ntohl(*(PUINT)(pReadData + stNVMReadWrite.uiNumBytes - SIGNATURE_SIZE));
+ if (ulDSDMagicNumInUsrBuff != DSD_IMAGE_MAGIC_NUMBER) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DSD Sig is present neither in Flash nor User provided Input..");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadData);
+ return Status;
+ }
}
+ }
- if(pBulkBuffer->SwapEndian == FALSE)
- Status = wrmWithLock(Adapter, (UINT)pBulkBuffer->Register, (PCHAR)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
- else
- Status = wrmaltWithLock(Adapter, (UINT)pBulkBuffer->Register, (PUINT)pBulkBuffer->Values, IoBuffer.InputLength - 2*sizeof(ULONG));
-
- if(Status != STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "WRM Failed\n");
- }
+ Status = BeceemNVMWrite(Adapter, (PUINT)pReadData, stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes, stNVMReadWrite.bVerify);
+ if (IsFlash2x(Adapter))
+ BcmFlash2xWriteSig(Adapter, Adapter->eActiveDSD);
- kfree(pvBuffer);
- break;
- }
+ Adapter->bHeaderChangeAllowed = FALSE;
- case IOCTL_BCM_GET_NVM_SIZE:
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ up(&Adapter->NVMRdmWrmLock);
- if(Adapter->eNVMType == NVM_EEPROM || Adapter->eNVMType == NVM_FLASH ) {
- if(copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiNVMDSDSize, sizeof(UINT)))
- return -EFAULT;
+ if (Status != STATUS_SUCCESS) {
+ kfree(pReadData);
+ return Status;
}
- Status = STATUS_SUCCESS ;
- break;
+ }
- case IOCTL_BCM_CAL_INIT :
+ do_gettimeofday(&tv1);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " timetaken by Write/read :%ld msec\n", (tv1.tv_sec - tv0.tv_sec)*1000 + (tv1.tv_usec - tv0.tv_usec)/1000);
- {
- UINT uiSectorSize = 0 ;
- if(Adapter->eNVMType == NVM_FLASH)
- {
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ kfree(pReadData);
+ Status = STATUS_SUCCESS;
+ }
+ break;
+
+ case IOCTL_BCM_FLASH2X_SECTION_READ: {
+ FLASH2X_READWRITE sFlash2xRead = {0};
+ PUCHAR pReadBuff = NULL ;
+ UINT NOB = 0;
+ UINT BuffSize = 0;
+ UINT ReadBytes = 0;
+ UINT ReadOffset = 0;
+ void __user *OutPutBuff;
+
+ if (IsFlash2x(Adapter) != TRUE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Does not have 2.x map");
+ return -EINVAL;
+ }
- if (copy_from_user(&uiSectorSize, IoBuffer.InputBuffer, sizeof(UINT)))
- return -EFAULT;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_FLASH2X_SECTION_READ Called");
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- if((uiSectorSize < MIN_SECTOR_SIZE) || (uiSectorSize > MAX_SECTOR_SIZE))
- {
- if (copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiSectorSize,
- sizeof(UINT)))
- return -EFAULT;
- }
- else
- {
- if(IsFlash2x(Adapter))
- {
- if (copy_to_user(IoBuffer.OutputBuffer,
- &Adapter->uiSectorSize ,
- sizeof(UINT)))
- return -EFAULT;
- }
- else
- {
- if((TRUE == Adapter->bShutStatus) ||
- (TRUE == Adapter->IdleMode))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Device is in Idle/Shutdown Mode\n");
- return -EACCES;
- }
-
- Adapter->uiSectorSize = uiSectorSize ;
- BcmUpdateSectorSize(Adapter,Adapter->uiSectorSize);
- }
- }
- Status = STATUS_SUCCESS ;
- }
- else
- {
- Status = STATUS_FAILURE;
- }
- }
- break;
- case IOCTL_BCM_SET_DEBUG :
-#ifdef DEBUG
- {
- USER_BCM_DBG_STATE sUserDebugState;
+ /* Reading FLASH 2.x READ structure */
+ if (copy_from_user(&sFlash2xRead, IoBuffer.InputBuffer, sizeof(FLASH2X_READWRITE)))
+ return -EFAULT;
-// BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "Entered the ioctl %x \n", IOCTL_BCM_SET_DEBUG );
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.Section :%x", sFlash2xRead.Section);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.offset :%x", sFlash2xRead.offset);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.numOfBytes :%x", sFlash2xRead.numOfBytes);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.bVerify :%x\n", sFlash2xRead.bVerify);
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "In SET_DEBUG ioctl\n");
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ /* This was internal to driver for raw read. now it has ben exposed to user space app. */
+ if (validateFlash2xReadWrite(Adapter, &sFlash2xRead) == FALSE)
+ return STATUS_FAILURE;
- if (copy_from_user(&sUserDebugState, IoBuffer.InputBuffer, sizeof(USER_BCM_DBG_STATE)))
- return -EFAULT;
+ NOB = sFlash2xRead.numOfBytes;
+ if (NOB > Adapter->uiSectorSize)
+ BuffSize = Adapter->uiSectorSize;
+ else
+ BuffSize = NOB;
+ ReadOffset = sFlash2xRead.offset ;
+ OutPutBuff = IoBuffer.OutputBuffer;
+ pReadBuff = (PCHAR)kzalloc(BuffSize , GFP_KERNEL);
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "IOCTL_BCM_SET_DEBUG: OnOff=%d Type = 0x%x ",
- sUserDebugState.OnOff, sUserDebugState.Type);
- //sUserDebugState.Subtype <<= 1;
- sUserDebugState.Subtype = 1 << sUserDebugState.Subtype;
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "actual Subtype=0x%x\n", sUserDebugState.Subtype);
-
- // Update new 'DebugState' in the Adapter
- Adapter->stDebugState.type |= sUserDebugState.Type;
- /* Subtype: A bitmap of 32 bits for Subtype per Type.
- * Valid indexes in 'subtype' array: 1,2,4,8
- * corresponding to valid Type values. Hence we can use the 'Type' field
- * as the index value, ignoring the array entries 0,3,5,6,7 !
- */
- if (sUserDebugState.OnOff)
- Adapter->stDebugState.subtype[sUserDebugState.Type] |= sUserDebugState.Subtype;
- else
- Adapter->stDebugState.subtype[sUserDebugState.Type] &= ~sUserDebugState.Subtype;
+ if (pReadBuff == NULL) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Memory allocation failed for Flash 2.x Read Structure");
+ return -ENOMEM;
+ }
+ down(&Adapter->NVMRdmWrmLock);
- BCM_SHOW_DEBUG_BITMAP(Adapter);
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
- }
-#endif
- break;
- case IOCTL_BCM_NVM_READ:
- case IOCTL_BCM_NVM_WRITE:
- {
- NVM_READWRITE stNVMReadWrite;
- PUCHAR pReadData = NULL;
- ULONG ulDSDMagicNumInUsrBuff = 0;
- struct timeval tv0, tv1;
- memset(&tv0,0,sizeof(struct timeval));
- memset(&tv1,0,sizeof(struct timeval));
- if((Adapter->eNVMType == NVM_FLASH) && (Adapter->uiFlashLayoutMajorVersion == 0))
- {
- BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"The Flash Control Section is Corrupted. Hence Rejection on NVM Read/Write\n");
- Status = -EFAULT;
- break;
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadBuff);
+ return -EACCES;
+ }
- if(IsFlash2x(Adapter))
- {
- if((Adapter->eActiveDSD != DSD0) &&
- (Adapter->eActiveDSD != DSD1) &&
- (Adapter->eActiveDSD != DSD2))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"No DSD is active..hence NVM Command is blocked");
- return STATUS_FAILURE ;
- }
- }
+ while (NOB) {
+ if (NOB > Adapter->uiSectorSize)
+ ReadBytes = Adapter->uiSectorSize;
+ else
+ ReadBytes = NOB;
- /* Copy Ioctl Buffer structure */
+ /* Reading the data from Flash 2.x */
+ Status = BcmFlash2xBulkRead(Adapter, (PUINT)pReadBuff, sFlash2xRead.Section, ReadOffset, ReadBytes);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Flash 2x read err with Status :%d", Status);
+ break;
+ }
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, pReadBuff, ReadBytes);
- if(copy_from_user(&stNVMReadWrite,
- (IOCTL_BCM_NVM_READ == cmd) ? IoBuffer.OutputBuffer : IoBuffer.InputBuffer,
- sizeof(NVM_READWRITE)))
- return -EFAULT;
+ Status = copy_to_user(OutPutBuff, pReadBuff, ReadBytes);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Copy to use failed with status :%d", Status);
+ break;
+ }
+ NOB = NOB - ReadBytes;
+ if (NOB) {
+ ReadOffset = ReadOffset + ReadBytes;
+ OutPutBuff = OutPutBuff + ReadBytes ;
+ }
+ }
- //
- // Deny the access if the offset crosses the cal area limit.
- //
- if((stNVMReadWrite.uiOffset + stNVMReadWrite.uiNumBytes) > Adapter->uiNVMDSDSize)
- {
- //BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Can't allow access beyond NVM Size: 0x%x 0x%x\n", stNVMReadWrite.uiOffset ,
-// stNVMReadWrite.uiNumBytes);
- Status = STATUS_FAILURE;
- break;
- }
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadBuff);
+ }
+ break;
+
+ case IOCTL_BCM_FLASH2X_SECTION_WRITE: {
+ FLASH2X_READWRITE sFlash2xWrite = {0};
+ PUCHAR pWriteBuff;
+ void __user *InputAddr;
+ UINT NOB = 0;
+ UINT BuffSize = 0;
+ UINT WriteOffset = 0;
+ UINT WriteBytes = 0;
+
+ if (IsFlash2x(Adapter) != TRUE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Does not have 2.x map");
+ return -EINVAL;
+ }
- pReadData = kzalloc(stNVMReadWrite.uiNumBytes, GFP_KERNEL);
- if(!pReadData)
- return -ENOMEM;
+ /* First make this False so that we can enable the Sector Permission Check in BeceemFlashBulkWrite */
+ Adapter->bAllDSDWriteAllow = FALSE;
- if(copy_from_user(pReadData, stNVMReadWrite.pBuffer,
- stNVMReadWrite.uiNumBytes))
- {
- Status = -EFAULT;
- kfree(pReadData);
- break;
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_FLASH2X_SECTION_WRITE Called");
- do_gettimeofday(&tv0);
- if(IOCTL_BCM_NVM_READ == cmd)
- {
- down(&Adapter->NVMRdmWrmLock);
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Device is in Idle/Shutdown Mode\n");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return -EACCES;
- }
+ /* Reading FLASH 2.x READ structure */
+ if (copy_from_user(&sFlash2xWrite, IoBuffer.InputBuffer, sizeof(FLASH2X_READWRITE)))
+ return -EFAULT;
- Status = BeceemNVMRead(Adapter, (PUINT)pReadData,
- stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes);
-
- up(&Adapter->NVMRdmWrmLock);
-
- if(Status != STATUS_SUCCESS)
- {
- kfree(pReadData);
- return Status;
- }
- if(copy_to_user(stNVMReadWrite.pBuffer,pReadData, stNVMReadWrite.uiNumBytes))
- {
- kfree(pReadData);
- Status = -EFAULT;
- }
- }
- else
- {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.Section :%x", sFlash2xWrite.Section);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.offset :%d", sFlash2xWrite.offset);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.numOfBytes :%x", sFlash2xWrite.numOfBytes);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\nsFlash2xRead.bVerify :%x\n", sFlash2xWrite.bVerify);
- down(&Adapter->NVMRdmWrmLock);
+ if ((sFlash2xWrite.Section != VSA0) && (sFlash2xWrite.Section != VSA1) && (sFlash2xWrite.Section != VSA2)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Only VSA write is allowed");
+ return -EINVAL;
+ }
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Device is in Idle/Shutdown Mode\n");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return -EACCES;
- }
+ if (validateFlash2xReadWrite(Adapter, &sFlash2xWrite) == FALSE)
+ return STATUS_FAILURE;
- Adapter->bHeaderChangeAllowed = TRUE ;
- if(IsFlash2x(Adapter))
- {
- /*
- New Requirement:-
- DSD section updation will be allowed in two case:-
- 1. if DSD sig is present in DSD header means dongle is ok and updation is fruitfull
- 2. if point 1 failes then user buff should have DSD sig. this point ensures that if dongle is
- corrupted then user space program first modify the DSD header with valid DSD sig so
- that this as well as further write may be worthwhile.
-
- This restriction has been put assuming that if DSD sig is corrupted, DSD
- data won't be considered valid.
-
-
- */
- Status = BcmFlash2xCorruptSig(Adapter,Adapter->eActiveDSD);
- if(Status != STATUS_SUCCESS)
- {
- if(( (stNVMReadWrite.uiOffset + stNVMReadWrite.uiNumBytes) != Adapter->uiNVMDSDSize ) ||
- (stNVMReadWrite.uiNumBytes < SIGNATURE_SIZE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"DSD Sig is present neither in Flash nor User provided Input..");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return Status;
- }
-
- ulDSDMagicNumInUsrBuff = ntohl(*(PUINT)(pReadData + stNVMReadWrite.uiNumBytes - SIGNATURE_SIZE));
- if(ulDSDMagicNumInUsrBuff != DSD_IMAGE_MAGIC_NUMBER)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"DSD Sig is present neither in Flash nor User provided Input..");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadData);
- return Status;
- }
- }
- }
- Status = BeceemNVMWrite(Adapter, (PUINT )pReadData,
- stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes, stNVMReadWrite.bVerify);
- if(IsFlash2x(Adapter))
- BcmFlash2xWriteSig(Adapter,Adapter->eActiveDSD);
+ InputAddr = sFlash2xWrite.pDataBuff;
+ WriteOffset = sFlash2xWrite.offset;
+ NOB = sFlash2xWrite.numOfBytes;
- Adapter->bHeaderChangeAllowed = FALSE ;
+ if (NOB > Adapter->uiSectorSize)
+ BuffSize = Adapter->uiSectorSize;
+ else
+ BuffSize = NOB ;
- up(&Adapter->NVMRdmWrmLock);
+ pWriteBuff = kmalloc(BuffSize, GFP_KERNEL);
+ if (pWriteBuff == NULL)
+ return -ENOMEM;
- if(Status != STATUS_SUCCESS)
- {
- kfree(pReadData);
- return Status;
- }
- }
- do_gettimeofday(&tv1);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " timetaken by Write/read :%ld msec\n",(tv1.tv_sec - tv0.tv_sec)*1000 +(tv1.tv_usec - tv0.tv_usec)/1000);
+ /* extracting the remainder of the given offset. */
+ WriteBytes = Adapter->uiSectorSize;
+ if (WriteOffset % Adapter->uiSectorSize)
+ WriteBytes = Adapter->uiSectorSize - (WriteOffset % Adapter->uiSectorSize);
+ if (NOB < WriteBytes)
+ WriteBytes = NOB;
- kfree(pReadData);
- Status = STATUS_SUCCESS;
- }
- break;
- case IOCTL_BCM_FLASH2X_SECTION_READ :
- {
-
- FLASH2X_READWRITE sFlash2xRead = {0};
- PUCHAR pReadBuff = NULL ;
- UINT NOB = 0;
- UINT BuffSize = 0;
- UINT ReadBytes = 0;
- UINT ReadOffset = 0;
- void __user *OutPutBuff;
-
- if(IsFlash2x(Adapter) != TRUE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Flash Does not have 2.x map");
- return -EINVAL;
- }
+ down(&Adapter->NVMRdmWrmLock);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_FLASH2X_SECTION_READ Called");
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
- //Reading FLASH 2.x READ structure
- if (copy_from_user(&sFlash2xRead, IoBuffer.InputBuffer,sizeof(FLASH2X_READWRITE)))
- return -EFAULT;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pWriteBuff);
+ return -EACCES;
+ }
+ BcmFlash2xCorruptSig(Adapter, sFlash2xWrite.Section);
+ do {
+ Status = copy_from_user(pWriteBuff, InputAddr, WriteBytes);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy to user failed with status :%d", Status);
+ break;
+ }
+ BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, pWriteBuff, WriteBytes);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\nsFlash2xRead.Section :%x" ,sFlash2xRead.Section);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\nsFlash2xRead.offset :%x" ,sFlash2xRead.offset);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\nsFlash2xRead.numOfBytes :%x" ,sFlash2xRead.numOfBytes);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\nsFlash2xRead.bVerify :%x\n" ,sFlash2xRead.bVerify);
+ /* Writing the data from Flash 2.x */
+ Status = BcmFlash2xBulkWrite(Adapter, (PUINT)pWriteBuff, sFlash2xWrite.Section, WriteOffset, WriteBytes, sFlash2xWrite.bVerify);
- //This was internal to driver for raw read. now it has ben exposed to user space app.
- if(validateFlash2xReadWrite(Adapter,&sFlash2xRead) == FALSE)
- return STATUS_FAILURE ;
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash 2x read err with Status :%d", Status);
+ break;
+ }
- NOB = sFlash2xRead.numOfBytes;
- if(NOB > Adapter->uiSectorSize )
- BuffSize = Adapter->uiSectorSize;
+ NOB = NOB - WriteBytes;
+ if (NOB) {
+ WriteOffset = WriteOffset + WriteBytes;
+ InputAddr = InputAddr + WriteBytes;
+ if (NOB > Adapter->uiSectorSize)
+ WriteBytes = Adapter->uiSectorSize;
else
- BuffSize = NOB ;
+ WriteBytes = NOB;
+ }
+ } while (NOB > 0);
- ReadOffset = sFlash2xRead.offset ;
- OutPutBuff = IoBuffer.OutputBuffer;
+ BcmFlash2xWriteSig(Adapter, sFlash2xWrite.Section);
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pWriteBuff);
+ }
+ break;
+ case IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP: {
+ PFLASH2X_BITMAP psFlash2xBitMap;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP Called");
- pReadBuff = (PCHAR)kzalloc(BuffSize , GFP_KERNEL);
- if(pReadBuff == NULL)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Memory allocation failed for Flash 2.x Read Structure");
- return -ENOMEM;
- }
- down(&Adapter->NVMRdmWrmLock);
-
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Device is in Idle/Shutdown Mode\n");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadBuff);
- return -EACCES;
- }
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- while(NOB)
- {
+ if (IoBuffer.OutputLength != sizeof(FLASH2X_BITMAP))
+ return -EINVAL;
- if(NOB > Adapter->uiSectorSize )
- ReadBytes = Adapter->uiSectorSize;
- else
- ReadBytes = NOB;
+ psFlash2xBitMap = kzalloc(sizeof(FLASH2X_BITMAP), GFP_KERNEL);
+ if (psFlash2xBitMap == NULL) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Memory is not available");
+ return -ENOMEM;
+ }
+ /* Reading the Flash Sectio Bit map */
+ down(&Adapter->NVMRdmWrmLock);
- //Reading the data from Flash 2.x
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
- Status = BcmFlash2xBulkRead(Adapter,(PUINT)pReadBuff,sFlash2xRead.Section,ReadOffset,ReadBytes);
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Flash 2x read err with Status :%d", Status);
- break ;
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(psFlash2xBitMap);
+ return -EACCES;
+ }
- BCM_DEBUG_PRINT_BUFFER(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,pReadBuff, ReadBytes);
-
- Status = copy_to_user(OutPutBuff, pReadBuff,ReadBytes);
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Copy to use failed with status :%d", Status);
- break;
- }
- NOB = NOB - ReadBytes;
- if(NOB)
- {
- ReadOffset = ReadOffset + ReadBytes ;
- OutPutBuff = OutPutBuff + ReadBytes ;
- }
+ BcmGetFlash2xSectionalBitMap(Adapter, psFlash2xBitMap);
+ up(&Adapter->NVMRdmWrmLock);
+ if (copy_to_user(IoBuffer.OutputBuffer, psFlash2xBitMap, sizeof(FLASH2X_BITMAP)))
+ Status = -EFAULT;
- }
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadBuff);
-
- }
- break ;
- case IOCTL_BCM_FLASH2X_SECTION_WRITE :
- {
- FLASH2X_READWRITE sFlash2xWrite = {0};
- PUCHAR pWriteBuff;
- void __user *InputAddr;
- UINT NOB = 0;
- UINT BuffSize = 0;
- UINT WriteOffset = 0;
- UINT WriteBytes = 0;
-
- if(IsFlash2x(Adapter) != TRUE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Flash Does not have 2.x map");
- return -EINVAL;
- }
+ kfree(psFlash2xBitMap);
+ }
+ break;
- //First make this False so that we can enable the Sector Permission Check in BeceemFlashBulkWrite
- Adapter->bAllDSDWriteAllow = FALSE;
+ case IOCTL_BCM_SET_ACTIVE_SECTION: {
+ FLASH2X_SECTION_VAL eFlash2xSectionVal = 0;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SET_ACTIVE_SECTION Called");
+ if (IsFlash2x(Adapter) != TRUE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Does not have 2.x map");
+ return -EINVAL;
+ }
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " IOCTL_BCM_FLASH2X_SECTION_WRITE Called");
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
+ return Status;
+ }
- //Reading FLASH 2.x READ structure
- if (copy_from_user(&sFlash2xWrite, IoBuffer.InputBuffer, sizeof(FLASH2X_READWRITE)))
- return -EFAULT;
+ Status = copy_from_user(&eFlash2xSectionVal, IoBuffer.InputBuffer, sizeof(INT));
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of flash section val failed");
+ return Status;
+ }
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\nsFlash2xRead.Section :%x" ,sFlash2xWrite.Section);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\nsFlash2xRead.offset :%d" ,sFlash2xWrite.offset);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\nsFlash2xRead.numOfBytes :%x" ,sFlash2xWrite.numOfBytes);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\nsFlash2xRead.bVerify :%x\n" ,sFlash2xWrite.bVerify);
- if((sFlash2xWrite.Section != VSA0) && (sFlash2xWrite.Section != VSA1) &&
- (sFlash2xWrite.Section != VSA2) )
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Only VSA write is allowed");
- return -EINVAL;
- }
+ down(&Adapter->NVMRdmWrmLock);
- if(validateFlash2xReadWrite(Adapter,&sFlash2xWrite) == FALSE)
- return STATUS_FAILURE ;
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
- InputAddr = sFlash2xWrite.pDataBuff;
- WriteOffset = sFlash2xWrite.offset ;
- NOB = sFlash2xWrite.numOfBytes;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ return -EACCES;
+ }
- if(NOB > Adapter->uiSectorSize )
- BuffSize = Adapter->uiSectorSize;
- else
- BuffSize = NOB ;
+ Status = BcmSetActiveSection(Adapter, eFlash2xSectionVal);
+ if (Status)
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Failed to make it's priority Highest. Status %d", Status);
- pWriteBuff = kmalloc(BuffSize, GFP_KERNEL);
- if(pWriteBuff == NULL)
- return -ENOMEM;
+ up(&Adapter->NVMRdmWrmLock);
+ }
+ break;
+ case IOCTL_BCM_IDENTIFY_ACTIVE_SECTION: {
+ /* Right Now we are taking care of only DSD */
+ Adapter->bAllDSDWriteAllow = FALSE;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_IDENTIFY_ACTIVE_SECTION called");
+ Status = STATUS_SUCCESS;
+ }
+ break;
- //extracting the remainder of the given offset.
- WriteBytes = Adapter->uiSectorSize ;
- if(WriteOffset % Adapter->uiSectorSize)
- WriteBytes =Adapter->uiSectorSize - (WriteOffset % Adapter->uiSectorSize);
- if(NOB < WriteBytes)
- WriteBytes = NOB;
+ case IOCTL_BCM_COPY_SECTION: {
+ FLASH2X_COPY_SECTION sCopySectStrut = {0};
+ Status = STATUS_SUCCESS;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_COPY_SECTION Called");
- down(&Adapter->NVMRdmWrmLock);
+ Adapter->bAllDSDWriteAllow = FALSE;
+ if (IsFlash2x(Adapter) != TRUE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Does not have 2.x map");
+ return -EINVAL;
+ }
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Device is in Idle/Shutdown Mode\n");
- up(&Adapter->NVMRdmWrmLock);
- kfree(pWriteBuff);
- return -EACCES;
- }
+ Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed Status :%d", Status);
+ return Status;
+ }
- BcmFlash2xCorruptSig(Adapter,sFlash2xWrite.Section);
- do
- {
- Status = copy_from_user(pWriteBuff,InputAddr,WriteBytes);
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Copy to user failed with status :%d", Status);
- break ;
- }
- BCM_DEBUG_PRINT_BUFFER(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,pWriteBuff,WriteBytes);
- //Writing the data from Flash 2.x
- Status = BcmFlash2xBulkWrite(Adapter,(PUINT)pWriteBuff,sFlash2xWrite.Section,WriteOffset,WriteBytes,sFlash2xWrite.bVerify);
-
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Flash 2x read err with Status :%d", Status);
- break ;
- }
+ Status = copy_from_user(&sCopySectStrut, IoBuffer.InputBuffer, sizeof(FLASH2X_COPY_SECTION));
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of Copy_Section_Struct failed with Status :%d", Status);
+ return Status;
+ }
- NOB = NOB - WriteBytes;
- if(NOB)
- {
- WriteOffset = WriteOffset + WriteBytes ;
- InputAddr = InputAddr + WriteBytes ;
- if(NOB > Adapter->uiSectorSize )
- WriteBytes = Adapter->uiSectorSize;
- else
- WriteBytes = NOB;
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Source SEction :%x", sCopySectStrut.SrcSection);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Destination SEction :%x", sCopySectStrut.DstSection);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "offset :%x", sCopySectStrut.offset);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "NOB :%x", sCopySectStrut.numOfBytes);
+ if (IsSectionExistInFlash(Adapter, sCopySectStrut.SrcSection) == FALSE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Source Section<%x> does not exixt in Flash ", sCopySectStrut.SrcSection);
+ return -EINVAL;
+ }
- } while(NOB > 0);
- BcmFlash2xWriteSig(Adapter,sFlash2xWrite.Section);
- up(&Adapter->NVMRdmWrmLock);
- kfree(pWriteBuff);
- }
- break ;
- case IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP :
- {
+ if (IsSectionExistInFlash(Adapter, sCopySectStrut.DstSection) == FALSE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Destinatio Section<%x> does not exixt in Flash ", sCopySectStrut.DstSection);
+ return -EINVAL;
+ }
- PFLASH2X_BITMAP psFlash2xBitMap;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP Called");
+ if (sCopySectStrut.SrcSection == sCopySectStrut.DstSection) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Source and Destination section should be different");
+ return -EINVAL;
+ }
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ down(&Adapter->NVMRdmWrmLock);
- if(IoBuffer.OutputLength != sizeof(FLASH2X_BITMAP))
- return -EINVAL;
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
- psFlash2xBitMap = kzalloc(sizeof(FLASH2X_BITMAP), GFP_KERNEL);
- if(psFlash2xBitMap == NULL)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Memory is not available");
- return -ENOMEM ;
- }
- //Reading the Flash Sectio Bit map
- down(&Adapter->NVMRdmWrmLock);
-
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Device is in Idle/Shutdown Mode\n");
- up(&Adapter->NVMRdmWrmLock);
- kfree(psFlash2xBitMap);
- return -EACCES;
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ up(&Adapter->NVMRdmWrmLock);
+ return -EACCES;
+ }
- BcmGetFlash2xSectionalBitMap(Adapter, psFlash2xBitMap);
- up(&Adapter->NVMRdmWrmLock);
- if (copy_to_user(IoBuffer.OutputBuffer, psFlash2xBitMap, sizeof(FLASH2X_BITMAP)))
- Status = -EFAULT;
-
- kfree(psFlash2xBitMap);
- }
- break ;
- case IOCTL_BCM_SET_ACTIVE_SECTION :
- {
- FLASH2X_SECTION_VAL eFlash2xSectionVal = 0;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SET_ACTIVE_SECTION Called");
-
- if(IsFlash2x(Adapter) != TRUE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Flash Does not have 2.x map");
- return -EINVAL;
- }
+ if (sCopySectStrut.SrcSection == ISO_IMAGE1 || sCopySectStrut.SrcSection == ISO_IMAGE2) {
+ if (IsNonCDLessDevice(Adapter)) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device is Non-CDLess hence won't have ISO !!");
+ Status = -EINVAL;
+ } else if (sCopySectStrut.numOfBytes == 0) {
+ Status = BcmCopyISO(Adapter, sCopySectStrut);
+ } else {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Partial Copy of ISO section is not Allowed..");
+ Status = STATUS_FAILURE;
+ }
+ up(&Adapter->NVMRdmWrmLock);
+ return Status;
+ }
- Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
- return Status;
- }
+ Status = BcmCopySection(Adapter, sCopySectStrut.SrcSection,
+ sCopySectStrut.DstSection, sCopySectStrut.offset, sCopySectStrut.numOfBytes);
+ up(&Adapter->NVMRdmWrmLock);
+ }
+ break;
- Status = copy_from_user(&eFlash2xSectionVal,IoBuffer.InputBuffer, sizeof(INT));
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy of flash section val failed");
- return Status;
- }
+ case IOCTL_BCM_GET_FLASH_CS_INFO: {
+ Status = STATUS_SUCCESS;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " IOCTL_BCM_GET_FLASH_CS_INFO Called");
- down(&Adapter->NVMRdmWrmLock);
+ Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
+ break;
+ }
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Device is in Idle/Shutdown Mode\n");
- up(&Adapter->NVMRdmWrmLock);
- return -EACCES;
- }
+ if (Adapter->eNVMType != NVM_FLASH) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Connected device does not have flash");
+ Status = -EINVAL;
+ break;
+ }
- Status = BcmSetActiveSection(Adapter,eFlash2xSectionVal);
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Failed to make it's priority Highest. Status %d", Status);
- }
- up(&Adapter->NVMRdmWrmLock);
- }
- break ;
- case IOCTL_BCM_IDENTIFY_ACTIVE_SECTION :
- {
- //Right Now we are taking care of only DSD
- Adapter->bAllDSDWriteAllow = FALSE ;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"IOCTL_BCM_IDENTIFY_ACTIVE_SECTION called");
-
- Status = STATUS_SUCCESS ;
- }
- break ;
- case IOCTL_BCM_COPY_SECTION :
- {
- FLASH2X_COPY_SECTION sCopySectStrut = {0};
- Status = STATUS_SUCCESS;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_COPY_SECTION Called");
-
- Adapter->bAllDSDWriteAllow = FALSE ;
- if(IsFlash2x(Adapter) != TRUE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Flash Does not have 2.x map");
- return -EINVAL;
- }
+ if (IsFlash2x(Adapter) == TRUE) {
+ if (IoBuffer.OutputLength < sizeof(FLASH2X_CS_INFO))
+ return -EINVAL;
- Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed Status :%d", Status);
- return Status;
- }
+ if (copy_to_user(IoBuffer.OutputBuffer, Adapter->psFlash2xCSInfo, sizeof(FLASH2X_CS_INFO)))
+ return -EFAULT;
+ } else {
+ if (IoBuffer.OutputLength < sizeof(FLASH_CS_INFO))
+ return -EINVAL;
- Status = copy_from_user(&sCopySectStrut, IoBuffer.InputBuffer, sizeof(FLASH2X_COPY_SECTION));
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy of Copy_Section_Struct failed with Status :%d", Status);
- return Status;
- }
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Source SEction :%x", sCopySectStrut.SrcSection);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Destination SEction :%x", sCopySectStrut.DstSection);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "offset :%x", sCopySectStrut.offset);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "NOB :%x", sCopySectStrut.numOfBytes);
+ if (copy_to_user(IoBuffer.OutputBuffer, Adapter->psFlashCSInfo, sizeof(FLASH_CS_INFO)))
+ return -EFAULT;
+ }
+ }
+ break;
+ case IOCTL_BCM_SELECT_DSD: {
+ UINT SectOfset = 0;
+ FLASH2X_SECTION_VAL eFlash2xSectionVal;
+ eFlash2xSectionVal = NO_SECTION_VAL;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_SELECT_DSD Called");
- if(IsSectionExistInFlash(Adapter,sCopySectStrut.SrcSection) == FALSE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Source Section<%x> does not exixt in Flash ", sCopySectStrut.SrcSection);
- return -EINVAL;
- }
+ if (IsFlash2x(Adapter) != TRUE) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash Does not have 2.x map");
+ return -EINVAL;
+ }
- if(IsSectionExistInFlash(Adapter,sCopySectStrut.DstSection) == FALSE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Destinatio Section<%x> does not exixt in Flash ", sCopySectStrut.DstSection);
- return -EINVAL;
- }
+ Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
+ return Status;
+ }
+ Status = copy_from_user(&eFlash2xSectionVal, IoBuffer.InputBuffer, sizeof(INT));
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy of flash section val failed");
+ return Status;
+ }
- if(sCopySectStrut.SrcSection == sCopySectStrut.DstSection)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Source and Destination section should be different");
- return -EINVAL;
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Read Section :%d", eFlash2xSectionVal);
+ if ((eFlash2xSectionVal != DSD0) &&
+ (eFlash2xSectionVal != DSD1) &&
+ (eFlash2xSectionVal != DSD2)) {
- down(&Adapter->NVMRdmWrmLock);
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Passed section<%x> is not DSD section", eFlash2xSectionVal);
+ return STATUS_FAILURE;
+ }
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Device is in Idle/Shutdown Mode\n");
- up(&Adapter->NVMRdmWrmLock);
- return -EACCES;
- }
+ SectOfset = BcmGetSectionValStartOffset(Adapter, eFlash2xSectionVal);
+ if (SectOfset == INVALID_OFFSET) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Provided Section val <%d> does not exixt in Flash 2.x", eFlash2xSectionVal);
+ return -EINVAL;
+ }
- if(sCopySectStrut.SrcSection == ISO_IMAGE1 || sCopySectStrut.SrcSection == ISO_IMAGE2)
- {
- if(IsNonCDLessDevice(Adapter))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Device is Non-CDLess hence won't have ISO !!");
- Status = -EINVAL ;
- }
- else if(sCopySectStrut.numOfBytes == 0)
- {
- Status = BcmCopyISO(Adapter,sCopySectStrut);
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Partial Copy of ISO section is not Allowed..");
- Status = STATUS_FAILURE ;
- }
- up(&Adapter->NVMRdmWrmLock);
- return Status;
- }
+ Adapter->bAllDSDWriteAllow = TRUE;
+ Adapter->ulFlashCalStart = SectOfset;
+ Adapter->eActiveDSD = eFlash2xSectionVal;
+ }
+ Status = STATUS_SUCCESS;
+ break;
+
+ case IOCTL_BCM_NVM_RAW_READ: {
+ NVM_READWRITE stNVMRead;
+ INT NOB ;
+ INT BuffSize ;
+ INT ReadOffset = 0;
+ UINT ReadBytes = 0 ;
+ PUCHAR pReadBuff;
+ void __user *OutPutBuff;
+
+ if (Adapter->eNVMType != NVM_FLASH) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "NVM TYPE is not Flash");
+ return -EINVAL;
+ }
- Status = BcmCopySection(Adapter, sCopySectStrut.SrcSection,
- sCopySectStrut.DstSection,sCopySectStrut.offset,sCopySectStrut.numOfBytes);
- up(&Adapter->NVMRdmWrmLock);
- }
- break ;
- case IOCTL_BCM_GET_FLASH_CS_INFO :
- {
- Status = STATUS_SUCCESS;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " IOCTL_BCM_GET_FLASH_CS_INFO Called");
-
- Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
- break;
- }
- if(Adapter->eNVMType != NVM_FLASH)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Connected device does not have flash");
- Status = -EINVAL;
- break;
- }
- if(IsFlash2x(Adapter) == TRUE)
- {
+ /* Copy Ioctl Buffer structure */
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER))) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "copy_from_user 1 failed\n");
+ Status = -EFAULT;
+ break;
+ }
- if(IoBuffer.OutputLength < sizeof(FLASH2X_CS_INFO))
- return -EINVAL;
+ if (copy_from_user(&stNVMRead, IoBuffer.OutputBuffer, sizeof(NVM_READWRITE)))
+ return -EFAULT;
- if (copy_to_user(IoBuffer.OutputBuffer, Adapter->psFlash2xCSInfo, sizeof(FLASH2X_CS_INFO)))
- return -EFAULT;
- }
- else
- {
- if(IoBuffer.OutputLength < sizeof(FLASH_CS_INFO))
- return -EINVAL;
+ NOB = stNVMRead.uiNumBytes;
+ /* In Raw-Read max Buff size : 64MB */
- if (copy_to_user(IoBuffer.OutputBuffer, Adapter->psFlashCSInfo, sizeof(FLASH_CS_INFO)))
- return -EFAULT;
+ if (NOB > DEFAULT_BUFF_SIZE)
+ BuffSize = DEFAULT_BUFF_SIZE;
+ else
+ BuffSize = NOB;
- }
- }
- break ;
- case IOCTL_BCM_SELECT_DSD :
- {
- UINT SectOfset = 0;
- FLASH2X_SECTION_VAL eFlash2xSectionVal;
- eFlash2xSectionVal = NO_SECTION_VAL ;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, " IOCTL_BCM_SELECT_DSD Called");
-
- if(IsFlash2x(Adapter) != TRUE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Flash Does not have 2.x map");
- return -EINVAL;
- }
+ ReadOffset = stNVMRead.uiOffset;
+ OutPutBuff = stNVMRead.pBuffer;
- Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy of IOCTL BUFFER failed");
- return Status;
- }
- Status = copy_from_user(&eFlash2xSectionVal, IoBuffer.InputBuffer, sizeof(INT));
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy of flash section val failed");
- return Status;
- }
+ pReadBuff = kzalloc(BuffSize , GFP_KERNEL);
+ if (pReadBuff == NULL) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Memory allocation failed for Flash 2.x Read Structure");
+ Status = -ENOMEM;
+ break;
+ }
+ down(&Adapter->NVMRdmWrmLock);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Read Section :%d", eFlash2xSectionVal);
- if((eFlash2xSectionVal != DSD0) &&
- (eFlash2xSectionVal != DSD1) &&
- (eFlash2xSectionVal != DSD2) )
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Passed section<%x> is not DSD section", eFlash2xSectionVal);
- return STATUS_FAILURE ;
- }
+ if ((Adapter->IdleMode == TRUE) ||
+ (Adapter->bShutStatus == TRUE) ||
+ (Adapter->bPreparingForLowPowerMode == TRUE)) {
- SectOfset= BcmGetSectionValStartOffset(Adapter,eFlash2xSectionVal);
- if(SectOfset == INVALID_OFFSET)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Provided Section val <%d> does not exixt in Flash 2.x", eFlash2xSectionVal);
- return -EINVAL;
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n");
+ kfree(pReadBuff);
+ up(&Adapter->NVMRdmWrmLock);
+ return -EACCES;
+ }
- Adapter->bAllDSDWriteAllow = TRUE ;
-
- Adapter->ulFlashCalStart = SectOfset ;
- Adapter->eActiveDSD = eFlash2xSectionVal;
- }
- Status = STATUS_SUCCESS ;
- break;
-
- case IOCTL_BCM_NVM_RAW_READ :
- {
-
- NVM_READWRITE stNVMRead;
- INT NOB ;
- INT BuffSize ;
- INT ReadOffset = 0;
- UINT ReadBytes = 0 ;
- PUCHAR pReadBuff;
- void __user *OutPutBuff;
-
- if(Adapter->eNVMType != NVM_FLASH)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"NVM TYPE is not Flash ");
- return -EINVAL ;
- }
+ Adapter->bFlashRawRead = TRUE;
- /* Copy Ioctl Buffer structure */
- if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "copy_from_user 1 failed\n");
- Status = -EFAULT;
- break;
- }
+ while (NOB) {
+ if (NOB > DEFAULT_BUFF_SIZE)
+ ReadBytes = DEFAULT_BUFF_SIZE;
+ else
+ ReadBytes = NOB;
- if(copy_from_user(&stNVMRead, IoBuffer.OutputBuffer,sizeof(NVM_READWRITE)))
- return -EFAULT;
+ /* Reading the data from Flash 2.x */
+ Status = BeceemNVMRead(Adapter, (PUINT)pReadBuff, ReadOffset, ReadBytes);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Flash 2x read err with Status :%d", Status);
+ break;
+ }
- NOB = stNVMRead.uiNumBytes;
- //In Raw-Read max Buff size : 64MB
+ BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, pReadBuff, ReadBytes);
- if(NOB > DEFAULT_BUFF_SIZE)
- BuffSize = DEFAULT_BUFF_SIZE;
- else
- BuffSize = NOB ;
+ Status = copy_to_user(OutPutBuff, pReadBuff, ReadBytes);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Copy to use failed with status :%d", Status);
+ break;
+ }
+ NOB = NOB - ReadBytes;
+ if (NOB) {
+ ReadOffset = ReadOffset + ReadBytes;
+ OutPutBuff = OutPutBuff + ReadBytes;
+ }
+ }
+ Adapter->bFlashRawRead = FALSE;
+ up(&Adapter->NVMRdmWrmLock);
+ kfree(pReadBuff);
+ break;
+ }
- ReadOffset = stNVMRead.uiOffset;
- OutPutBuff = stNVMRead.pBuffer;
+ case IOCTL_BCM_CNTRLMSG_MASK: {
+ ULONG RxCntrlMsgBitMask = 0;
- pReadBuff = kzalloc(BuffSize , GFP_KERNEL);
- if(pReadBuff == NULL)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Memory allocation failed for Flash 2.x Read Structure");
- Status = -ENOMEM;
- break;
- }
- down(&Adapter->NVMRdmWrmLock);
-
- if((Adapter->IdleMode == TRUE) ||
- (Adapter->bShutStatus ==TRUE) ||
- (Adapter->bPreparingForLowPowerMode ==TRUE))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Device is in Idle/Shutdown Mode\n");
- kfree(pReadBuff);
- up(&Adapter->NVMRdmWrmLock);
- return -EACCES;
- }
+ /* Copy Ioctl Buffer structure */
+ Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "copy of Ioctl buffer is failed from user space");
+ Status = -EFAULT;
+ break;
+ }
- Adapter->bFlashRawRead = TRUE ;
- while(NOB)
- {
- if(NOB > DEFAULT_BUFF_SIZE )
- ReadBytes = DEFAULT_BUFF_SIZE;
- else
- ReadBytes = NOB;
-
- //Reading the data from Flash 2.x
- Status = BeceemNVMRead(Adapter,(PUINT)pReadBuff,ReadOffset,ReadBytes);
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Flash 2x read err with Status :%d", Status);
- break;
- }
+ if (IoBuffer.InputLength != sizeof(unsigned long)) {
+ Status = -EINVAL;
+ break;
+ }
- BCM_DEBUG_PRINT_BUFFER(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,pReadBuff,ReadBytes);
-
- Status = copy_to_user(OutPutBuff, pReadBuff,ReadBytes);
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Copy to use failed with status :%d", Status);
- break;
- }
- NOB = NOB - ReadBytes;
- if(NOB)
- {
- ReadOffset = ReadOffset + ReadBytes ;
- OutPutBuff = OutPutBuff + ReadBytes ;
- }
+ Status = copy_from_user(&RxCntrlMsgBitMask, IoBuffer.InputBuffer, IoBuffer.InputLength);
+ if (Status) {
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "copy of control bit mask failed from user space");
+ Status = -EFAULT;
+ break;
+ }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "\n Got user defined cntrl msg bit mask :%lx", RxCntrlMsgBitMask);
+ pTarang->RxCntrlMsgBitMask = RxCntrlMsgBitMask;
+ }
+ break;
- }
- Adapter->bFlashRawRead = FALSE ;
- up(&Adapter->NVMRdmWrmLock);
- kfree(pReadBuff);
- break ;
- }
-
- case IOCTL_BCM_CNTRLMSG_MASK:
- {
- ULONG RxCntrlMsgBitMask = 0 ;
-
- /* Copy Ioctl Buffer structure */
- Status = copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER));
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"copy of Ioctl buffer is failed from user space");
- Status = -EFAULT;
- break;
- }
+ case IOCTL_BCM_GET_DEVICE_DRIVER_INFO: {
+ DEVICE_DRIVER_INFO DevInfo;
- if (IoBuffer.InputLength != sizeof(unsigned long)) {
- Status = -EINVAL;
- break;
- }
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Called IOCTL_BCM_GET_DEVICE_DRIVER_INFO\n");
- Status = copy_from_user(&RxCntrlMsgBitMask, IoBuffer.InputBuffer, IoBuffer.InputLength);
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"copy of control bit mask failed from user space");
- Status = -EFAULT;
- break;
- }
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\n Got user defined cntrl msg bit mask :%lx", RxCntrlMsgBitMask);
- pTarang->RxCntrlMsgBitMask = RxCntrlMsgBitMask ;
- }
- break;
- case IOCTL_BCM_GET_DEVICE_DRIVER_INFO:
- {
- DEVICE_DRIVER_INFO DevInfo;
-
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Called IOCTL_BCM_GET_DEVICE_DRIVER_INFO\n");
-
- DevInfo.MaxRDMBufferSize = BUFFER_4K;
- DevInfo.u32DSDStartOffset = EEPROM_CALPARAM_START;
- DevInfo.u32RxAlignmentCorrection = 0;
- DevInfo.u32NVMType = Adapter->eNVMType;
- DevInfo.u32InterfaceType = BCM_USB;
-
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ DevInfo.MaxRDMBufferSize = BUFFER_4K;
+ DevInfo.u32DSDStartOffset = EEPROM_CALPARAM_START;
+ DevInfo.u32RxAlignmentCorrection = 0;
+ DevInfo.u32NVMType = Adapter->eNVMType;
+ DevInfo.u32InterfaceType = BCM_USB;
- if(IoBuffer.OutputLength < sizeof(DevInfo))
- return -EINVAL;
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- if (copy_to_user(IoBuffer.OutputBuffer, &DevInfo, sizeof(DevInfo)))
- return -EFAULT;
- }
- break ;
+ if (IoBuffer.OutputLength < sizeof(DevInfo))
+ return -EINVAL;
- case IOCTL_BCM_TIME_SINCE_NET_ENTRY:
- {
- ST_TIME_ELAPSED stTimeElapsedSinceNetEntry = {0};
+ if (copy_to_user(IoBuffer.OutputBuffer, &DevInfo, sizeof(DevInfo)))
+ return -EFAULT;
+ }
+ break;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"IOCTL_BCM_TIME_SINCE_NET_ENTRY called");
+ case IOCTL_BCM_TIME_SINCE_NET_ENTRY: {
+ ST_TIME_ELAPSED stTimeElapsedSinceNetEntry = {0};
- if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
- return -EFAULT;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_TIME_SINCE_NET_ENTRY called");
- if(IoBuffer.OutputLength < sizeof(ST_TIME_ELAPSED))
- return -EINVAL;
+ if (copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
+ return -EFAULT;
- stTimeElapsedSinceNetEntry.ul64TimeElapsedSinceNetEntry = get_seconds() - Adapter->liTimeSinceLastNetEntry;
+ if (IoBuffer.OutputLength < sizeof(ST_TIME_ELAPSED))
+ return -EINVAL;
- if (copy_to_user(IoBuffer.OutputBuffer, &stTimeElapsedSinceNetEntry, sizeof(ST_TIME_ELAPSED)))
- return -EFAULT;
+ stTimeElapsedSinceNetEntry.ul64TimeElapsedSinceNetEntry = get_seconds() - Adapter->liTimeSinceLastNetEntry;
- }
- break;
+ if (copy_to_user(IoBuffer.OutputBuffer, &stTimeElapsedSinceNetEntry, sizeof(ST_TIME_ELAPSED)))
+ return -EFAULT;
+ }
+ break;
- case IOCTL_CLOSE_NOTIFICATION:
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"IOCTL_CLOSE_NOTIFICATION");
- break;
+ case IOCTL_CLOSE_NOTIFICATION:
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_CLOSE_NOTIFICATION");
+ break;
- default:
- pr_info(DRV_NAME ": unknown ioctl cmd=%#x\n", cmd);
- Status = STATUS_FAILURE;
- break;
+ default:
+ pr_info(DRV_NAME ": unknown ioctl cmd=%#x\n", cmd);
+ Status = STATUS_FAILURE;
+ break;
}
return Status;
}
}
Adapter->pstCreatedClassDevice = device_create(bcm_class, NULL,
- MKDEV(Adapter->major, 0),
- Adapter, DEV_NAME);
+ MKDEV(Adapter->major, 0),
+ Adapter, DEV_NAME);
if (IS_ERR(Adapter->pstCreatedClassDevice)) {
pr_err(DRV_NAME ": class device create failed\n");
unregister_chrdev(Adapter->major, DEV_NAME);
}
}
+
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff