mtd: generic FSMC NAND MTD driver
authorLinus Walleij <linus.walleij@stericsson.com>
Sun, 12 Sep 2010 22:35:22 +0000 (00:35 +0200)
committerDavid Woodhouse <David.Woodhouse@intel.com>
Sun, 24 Oct 2010 23:33:48 +0000 (00:33 +0100)
This is the same driver submitted by ST Micros SPEAr team but
generalized and tested on the ST-Ericsson U300. It probably
easily works on the NHK8815 too.

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
drivers/mtd/nand/Kconfig
drivers/mtd/nand/Makefile
drivers/mtd/nand/fsmc_nand.c [new file with mode: 0644]
include/linux/mtd/fsmc.h [new file with mode: 0644]

index a6f22f5bbef6bc7b0ce55aef4617c9ad7ee05eaa..a494cce704b964d83cca76e37a92f97a110983c2 100644 (file)
@@ -524,4 +524,11 @@ config MTD_NAND_JZ4740
        help
                Enables support for NAND Flash on JZ4740 SoC based boards.
 
+config MTD_NAND_FSMC
+       tristate "Support for NAND on ST Micros FSMC"
+       depends on PLAT_SPEAR || PLAT_NOMADIK || MACH_U300
+       help
+         Enables support for NAND Flash chips on the ST Microelectronics
+         Flexible Static Memory Controller (FSMC)
+
 endif # MTD_NAND
index ac83dcdac5d6182048e2279d24659126cd903a72..8ad6faec72cb315bacc6897616a35c4a5f7154fd 100644 (file)
@@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
 obj-$(CONFIG_MTD_NAND_S3C2410)         += s3c2410.o
 obj-$(CONFIG_MTD_NAND_DAVINCI)         += davinci_nand.o
 obj-$(CONFIG_MTD_NAND_DISKONCHIP)      += diskonchip.o
+obj-$(CONFIG_MTD_NAND_FSMC)            += fsmc_nand.o
 obj-$(CONFIG_MTD_NAND_H1900)           += h1910.o
 obj-$(CONFIG_MTD_NAND_RTC_FROM4)       += rtc_from4.o
 obj-$(CONFIG_MTD_NAND_SHARPSL)         += sharpsl.o
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
new file mode 100644 (file)
index 0000000..02edfba
--- /dev/null
@@ -0,0 +1,866 @@
+/*
+ * drivers/mtd/nand/fsmc_nand.c
+ *
+ * ST Microelectronics
+ * Flexible Static Memory Controller (FSMC)
+ * Driver for NAND portions
+ *
+ * Copyright © 2010 ST Microelectronics
+ * Vipin Kumar <vipin.kumar@st.com>
+ * Ashish Priyadarshi
+ *
+ * Based on drivers/mtd/nand/nomadik_nand.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/resource.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mtd/fsmc.h>
+#include <mtd/mtd-abi.h>
+
+static struct nand_ecclayout fsmc_ecc1_layout = {
+       .eccbytes = 24,
+       .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
+               66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
+       .oobfree = {
+               {.offset = 8, .length = 8},
+               {.offset = 24, .length = 8},
+               {.offset = 40, .length = 8},
+               {.offset = 56, .length = 8},
+               {.offset = 72, .length = 8},
+               {.offset = 88, .length = 8},
+               {.offset = 104, .length = 8},
+               {.offset = 120, .length = 8}
+       }
+};
+
+static struct nand_ecclayout fsmc_ecc4_lp_layout = {
+       .eccbytes = 104,
+       .eccpos = {  2,   3,   4,   5,   6,   7,   8,
+               9,  10,  11,  12,  13,  14,
+               18,  19,  20,  21,  22,  23,  24,
+               25,  26,  27,  28,  29,  30,
+               34,  35,  36,  37,  38,  39,  40,
+               41,  42,  43,  44,  45,  46,
+               50,  51,  52,  53,  54,  55,  56,
+               57,  58,  59,  60,  61,  62,
+               66,  67,  68,  69,  70,  71,  72,
+               73,  74,  75,  76,  77,  78,
+               82,  83,  84,  85,  86,  87,  88,
+               89,  90,  91,  92,  93,  94,
+               98,  99, 100, 101, 102, 103, 104,
+               105, 106, 107, 108, 109, 110,
+               114, 115, 116, 117, 118, 119, 120,
+               121, 122, 123, 124, 125, 126
+       },
+       .oobfree = {
+               {.offset = 15, .length = 3},
+               {.offset = 31, .length = 3},
+               {.offset = 47, .length = 3},
+               {.offset = 63, .length = 3},
+               {.offset = 79, .length = 3},
+               {.offset = 95, .length = 3},
+               {.offset = 111, .length = 3},
+               {.offset = 127, .length = 1}
+       }
+};
+
+/*
+ * ECC placement definitions in oobfree type format.
+ * There are 13 bytes of ecc for every 512 byte block and it has to be read
+ * consecutively and immediately after the 512 byte data block for hardware to
+ * generate the error bit offsets in 512 byte data.
+ * Managing the ecc bytes in the following way makes it easier for software to
+ * read ecc bytes consecutive to data bytes. This way is similar to
+ * oobfree structure maintained already in generic nand driver
+ */
+static struct fsmc_eccplace fsmc_ecc4_lp_place = {
+       .eccplace = {
+               {.offset = 2, .length = 13},
+               {.offset = 18, .length = 13},
+               {.offset = 34, .length = 13},
+               {.offset = 50, .length = 13},
+               {.offset = 66, .length = 13},
+               {.offset = 82, .length = 13},
+               {.offset = 98, .length = 13},
+               {.offset = 114, .length = 13}
+       }
+};
+
+static struct nand_ecclayout fsmc_ecc4_sp_layout = {
+       .eccbytes = 13,
+       .eccpos = { 0,  1,  2,  3,  6,  7, 8,
+               9, 10, 11, 12, 13, 14
+       },
+       .oobfree = {
+               {.offset = 15, .length = 1},
+       }
+};
+
+static struct fsmc_eccplace fsmc_ecc4_sp_place = {
+       .eccplace = {
+               {.offset = 0, .length = 4},
+               {.offset = 6, .length = 9}
+       }
+};
+
+/*
+ * Default partition tables to be used if the partition information not
+ * provided through platform data
+ */
+#define PARTITION(n, off, sz)  {.name = n, .offset = off, .size = sz}
+
+/*
+ * Default partition layout for small page(= 512 bytes) devices
+ * Size for "Root file system" is updated in driver based on actual device size
+ */
+static struct mtd_partition partition_info_16KB_blk[] = {
+       PARTITION("X-loader", 0, 4 * 0x4000),
+       PARTITION("U-Boot", 0x10000, 20 * 0x4000),
+       PARTITION("Kernel", 0x60000, 256 * 0x4000),
+       PARTITION("Root File System", 0x460000, 0),
+};
+
+/*
+ * Default partition layout for large page(> 512 bytes) devices
+ * Size for "Root file system" is updated in driver based on actual device size
+ */
+static struct mtd_partition partition_info_128KB_blk[] = {
+       PARTITION("X-loader", 0, 4 * 0x20000),
+       PARTITION("U-Boot", 0x80000, 12 * 0x20000),
+       PARTITION("Kernel", 0x200000, 48 * 0x20000),
+       PARTITION("Root File System", 0x800000, 0),
+};
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/**
+ * struct fsmc_nand_data - atructure for FSMC NAND device state
+ *
+ * @mtd:               MTD info for a NAND flash.
+ * @nand:              Chip related info for a NAND flash.
+ * @partitions:                Partition info for a NAND Flash.
+ * @nr_partitions:     Total number of partition of a NAND flash.
+ *
+ * @ecc_place:         ECC placing locations in oobfree type format.
+ * @bank:              Bank number for probed device.
+ * @clk:               Clock structure for FSMC.
+ *
+ * @data_va:           NAND port for Data.
+ * @cmd_va:            NAND port for Command.
+ * @addr_va:           NAND port for Address.
+ * @regs_va:           FSMC regs base address.
+ */
+struct fsmc_nand_data {
+       struct mtd_info         mtd;
+       struct nand_chip        nand;
+       struct mtd_partition    *partitions;
+       unsigned int            nr_partitions;
+
+       struct fsmc_eccplace    *ecc_place;
+       unsigned int            bank;
+       struct clk              *clk;
+
+       struct resource         *resregs;
+       struct resource         *rescmd;
+       struct resource         *resaddr;
+       struct resource         *resdata;
+
+       void __iomem            *data_va;
+       void __iomem            *cmd_va;
+       void __iomem            *addr_va;
+       void __iomem            *regs_va;
+
+       void                    (*select_chip)(uint32_t bank, uint32_t busw);
+};
+
+/* Assert CS signal based on chipnr */
+static void fsmc_select_chip(struct mtd_info *mtd, int chipnr)
+{
+       struct nand_chip *chip = mtd->priv;
+       struct fsmc_nand_data *host;
+
+       host = container_of(mtd, struct fsmc_nand_data, mtd);
+
+       switch (chipnr) {
+       case -1:
+               chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+               break;
+       case 0:
+       case 1:
+       case 2:
+       case 3:
+               if (host->select_chip)
+                       host->select_chip(chipnr,
+                                       chip->options & NAND_BUSWIDTH_16);
+               break;
+
+       default:
+               BUG();
+       }
+}
+
+/*
+ * fsmc_cmd_ctrl - For facilitaing Hardware access
+ * This routine allows hardware specific access to control-lines(ALE,CLE)
+ */
+static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+       struct nand_chip *this = mtd->priv;
+       struct fsmc_nand_data *host = container_of(mtd,
+                                       struct fsmc_nand_data, mtd);
+       struct fsmc_regs *regs = host->regs_va;
+       unsigned int bank = host->bank;
+
+       if (ctrl & NAND_CTRL_CHANGE) {
+               if (ctrl & NAND_CLE) {
+                       this->IO_ADDR_R = (void __iomem *)host->cmd_va;
+                       this->IO_ADDR_W = (void __iomem *)host->cmd_va;
+               } else if (ctrl & NAND_ALE) {
+                       this->IO_ADDR_R = (void __iomem *)host->addr_va;
+                       this->IO_ADDR_W = (void __iomem *)host->addr_va;
+               } else {
+                       this->IO_ADDR_R = (void __iomem *)host->data_va;
+                       this->IO_ADDR_W = (void __iomem *)host->data_va;
+               }
+
+               if (ctrl & NAND_NCE) {
+                       writel(readl(&regs->bank_regs[bank].pc) | FSMC_ENABLE,
+                                       &regs->bank_regs[bank].pc);
+               } else {
+                       writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ENABLE,
+                                      &regs->bank_regs[bank].pc);
+               }
+       }
+
+       mb();
+
+       if (cmd != NAND_CMD_NONE)
+               writeb(cmd, this->IO_ADDR_W);
+}
+
+/*
+ * fsmc_nand_setup - FSMC (Flexible Static Memory Controller) init routine
+ *
+ * This routine initializes timing parameters related to NAND memory access in
+ * FSMC registers
+ */
+static void __init fsmc_nand_setup(struct fsmc_regs *regs, uint32_t bank,
+                                  uint32_t busw)
+{
+       uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
+
+       if (busw)
+               writel(value | FSMC_DEVWID_16, &regs->bank_regs[bank].pc);
+       else
+               writel(value | FSMC_DEVWID_8, &regs->bank_regs[bank].pc);
+
+       writel(readl(&regs->bank_regs[bank].pc) | FSMC_TCLR_1 | FSMC_TAR_1,
+              &regs->bank_regs[bank].pc);
+       writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
+              &regs->bank_regs[bank].comm);
+       writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
+              &regs->bank_regs[bank].attrib);
+}
+
+/*
+ * fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers
+ */
+static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+       struct fsmc_nand_data *host = container_of(mtd,
+                                       struct fsmc_nand_data, mtd);
+       struct fsmc_regs *regs = host->regs_va;
+       uint32_t bank = host->bank;
+
+       writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ECCPLEN_256,
+                      &regs->bank_regs[bank].pc);
+       writel(readl(&regs->bank_regs[bank].pc) & ~FSMC_ECCEN,
+                       &regs->bank_regs[bank].pc);
+       writel(readl(&regs->bank_regs[bank].pc) | FSMC_ECCEN,
+                       &regs->bank_regs[bank].pc);
+}
+
+/*
+ * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
+ * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction upto
+ * max of 8-bits)
+ */
+static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
+                               uint8_t *ecc)
+{
+       struct fsmc_nand_data *host = container_of(mtd,
+                                       struct fsmc_nand_data, mtd);
+       struct fsmc_regs *regs = host->regs_va;
+       uint32_t bank = host->bank;
+       uint32_t ecc_tmp;
+       unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT;
+
+       do {
+               if (readl(&regs->bank_regs[bank].sts) & FSMC_CODE_RDY)
+                       break;
+               else
+                       cond_resched();
+       } while (!time_after_eq(jiffies, deadline));
+
+       ecc_tmp = readl(&regs->bank_regs[bank].ecc1);
+       ecc[0] = (uint8_t) (ecc_tmp >> 0);
+       ecc[1] = (uint8_t) (ecc_tmp >> 8);
+       ecc[2] = (uint8_t) (ecc_tmp >> 16);
+       ecc[3] = (uint8_t) (ecc_tmp >> 24);
+
+       ecc_tmp = readl(&regs->bank_regs[bank].ecc2);
+       ecc[4] = (uint8_t) (ecc_tmp >> 0);
+       ecc[5] = (uint8_t) (ecc_tmp >> 8);
+       ecc[6] = (uint8_t) (ecc_tmp >> 16);
+       ecc[7] = (uint8_t) (ecc_tmp >> 24);
+
+       ecc_tmp = readl(&regs->bank_regs[bank].ecc3);
+       ecc[8] = (uint8_t) (ecc_tmp >> 0);
+       ecc[9] = (uint8_t) (ecc_tmp >> 8);
+       ecc[10] = (uint8_t) (ecc_tmp >> 16);
+       ecc[11] = (uint8_t) (ecc_tmp >> 24);
+
+       ecc_tmp = readl(&regs->bank_regs[bank].sts);
+       ecc[12] = (uint8_t) (ecc_tmp >> 16);
+
+       return 0;
+}
+
+/*
+ * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
+ * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction upto
+ * max of 1-bit)
+ */
+static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
+                               uint8_t *ecc)
+{
+       struct fsmc_nand_data *host = container_of(mtd,
+                                       struct fsmc_nand_data, mtd);
+       struct fsmc_regs *regs = host->regs_va;
+       uint32_t bank = host->bank;
+       uint32_t ecc_tmp;
+
+       ecc_tmp = readl(&regs->bank_regs[bank].ecc1);
+       ecc[0] = (uint8_t) (ecc_tmp >> 0);
+       ecc[1] = (uint8_t) (ecc_tmp >> 8);
+       ecc[2] = (uint8_t) (ecc_tmp >> 16);
+
+       return 0;
+}
+
+/*
+ * fsmc_read_page_hwecc
+ * @mtd:       mtd info structure
+ * @chip:      nand chip info structure
+ * @buf:       buffer to store read data
+ * @page:      page number to read
+ *
+ * This routine is needed for fsmc verison 8 as reading from NAND chip has to be
+ * performed in a strict sequence as follows:
+ * data(512 byte) -> ecc(13 byte)
+ * After this read, fsmc hardware generates and reports error data bits(upto a
+ * max of 8 bits)
+ */
+static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+                                uint8_t *buf, int page)
+{
+       struct fsmc_nand_data *host = container_of(mtd,
+                                       struct fsmc_nand_data, mtd);
+       struct fsmc_eccplace *ecc_place = host->ecc_place;
+       int i, j, s, stat, eccsize = chip->ecc.size;
+       int eccbytes = chip->ecc.bytes;
+       int eccsteps = chip->ecc.steps;
+       uint8_t *p = buf;
+       uint8_t *ecc_calc = chip->buffers->ecccalc;
+       uint8_t *ecc_code = chip->buffers->ecccode;
+       int off, len, group = 0;
+       /*
+        * ecc_oob is intentionally taken as uint16_t. In 16bit devices, we
+        * end up reading 14 bytes (7 words) from oob. The local array is
+        * to maintain word alignment
+        */
+       uint16_t ecc_oob[7];
+       uint8_t *oob = (uint8_t *)&ecc_oob[0];
+
+       for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
+
+               chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
+               chip->ecc.hwctl(mtd, NAND_ECC_READ);
+               chip->read_buf(mtd, p, eccsize);
+
+               for (j = 0; j < eccbytes;) {
+                       off = ecc_place->eccplace[group].offset;
+                       len = ecc_place->eccplace[group].length;
+                       group++;
+
+                       /*
+                       * length is intentionally kept a higher multiple of 2
+                       * to read at least 13 bytes even in case of 16 bit NAND
+                       * devices
+                       */
+                       len = roundup(len, 2);
+                       chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
+                       chip->read_buf(mtd, oob + j, len);
+                       j += len;
+               }
+
+               memcpy(&ecc_code[i], oob, 13);
+               chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+               stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+               if (stat < 0)
+                       mtd->ecc_stats.failed++;
+               else
+                       mtd->ecc_stats.corrected += stat;
+       }
+
+       return 0;
+}
+
+/*
+ * fsmc_correct_data
+ * @mtd:       mtd info structure
+ * @dat:       buffer of read data
+ * @read_ecc:  ecc read from device spare area
+ * @calc_ecc:  ecc calculated from read data
+ *
+ * calc_ecc is a 104 bit information containing maximum of 8 error
+ * offset informations of 13 bits each in 512 bytes of read data.
+ */
+static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat,
+                            uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+       struct fsmc_nand_data *host = container_of(mtd,
+                                       struct fsmc_nand_data, mtd);
+       struct fsmc_regs *regs = host->regs_va;
+       unsigned int bank = host->bank;
+       uint16_t err_idx[8];
+       uint64_t ecc_data[2];
+       uint32_t num_err, i;
+
+       /* The calculated ecc is actually the correction index in data */
+       memcpy(ecc_data, calc_ecc, 13);
+
+       /*
+        * ------------------- calc_ecc[] bit wise -----------|--13 bits--|
+        * |---idx[7]--|--.....-----|---idx[2]--||---idx[1]--||---idx[0]--|
+        *
+        * calc_ecc is a 104 bit information containing maximum of 8 error
+        * offset informations of 13 bits each. calc_ecc is copied into a
+        * uint64_t array and error offset indexes are populated in err_idx
+        * array
+        */
+       for (i = 0; i < 8; i++) {
+               if (i == 4) {
+                       err_idx[4] = ((ecc_data[1] & 0x1) << 12) | ecc_data[0];
+                       ecc_data[1] >>= 1;
+                       continue;
+               }
+               err_idx[i] = (ecc_data[i/4] & 0x1FFF);
+               ecc_data[i/4] >>= 13;
+       }
+
+       num_err = (readl(&regs->bank_regs[bank].sts) >> 10) & 0xF;
+
+       if (num_err == 0xF)
+               return -EBADMSG;
+
+       i = 0;
+       while (num_err--) {
+               change_bit(0, (unsigned long *)&err_idx[i]);
+               change_bit(1, (unsigned long *)&err_idx[i]);
+
+               if (err_idx[i] <= 512 * 8) {
+                       change_bit(err_idx[i], (unsigned long *)dat);
+                       i++;
+               }
+       }
+       return i;
+}
+
+/*
+ * fsmc_nand_probe - Probe function
+ * @pdev:       platform device structure
+ */
+static int __init fsmc_nand_probe(struct platform_device *pdev)
+{
+       struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+       struct fsmc_nand_data *host;
+       struct mtd_info *mtd;
+       struct nand_chip *nand;
+       struct fsmc_regs *regs;
+       struct resource *res;
+       int nr_parts, ret = 0;
+
+       if (!pdata) {
+               dev_err(&pdev->dev, "platform data is NULL\n");
+               return -EINVAL;
+       }
+
+       /* Allocate memory for the device structure (and zero it) */
+       host = kzalloc(sizeof(*host), GFP_KERNEL);
+       if (!host) {
+               dev_err(&pdev->dev, "failed to allocate device structure\n");
+               return -ENOMEM;
+       }
+
+       res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+       if (!res) {
+               ret = -EIO;
+               goto err_probe1;
+       }
+
+       host->resdata = request_mem_region(res->start, resource_size(res),
+                       pdev->name);
+       if (!host->resdata) {
+               ret = -EIO;
+               goto err_probe1;
+       }
+
+       host->data_va = ioremap(res->start, resource_size(res));
+       if (!host->data_va) {
+               ret = -EIO;
+               goto err_probe1;
+       }
+
+       host->resaddr = request_mem_region(res->start + PLAT_NAND_ALE,
+                       resource_size(res), pdev->name);
+       if (!host->resaddr) {
+               ret = -EIO;
+               goto err_probe1;
+       }
+
+       host->addr_va = ioremap(res->start + PLAT_NAND_ALE, resource_size(res));
+       if (!host->addr_va) {
+               ret = -EIO;
+               goto err_probe1;
+       }
+
+       host->rescmd = request_mem_region(res->start + PLAT_NAND_CLE,
+                       resource_size(res), pdev->name);
+       if (!host->rescmd) {
+               ret = -EIO;
+               goto err_probe1;
+       }
+
+       host->cmd_va = ioremap(res->start + PLAT_NAND_CLE, resource_size(res));
+       if (!host->cmd_va) {
+               ret = -EIO;
+               goto err_probe1;
+       }
+
+       res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs");
+       if (!res) {
+               ret = -EIO;
+               goto err_probe1;
+       }
+
+       host->resregs = request_mem_region(res->start, resource_size(res),
+                       pdev->name);
+       if (!host->resregs) {
+               ret = -EIO;
+               goto err_probe1;
+       }
+
+       host->regs_va = ioremap(res->start, resource_size(res));
+       if (!host->regs_va) {
+               ret = -EIO;
+               goto err_probe1;
+       }
+
+       host->clk = clk_get(&pdev->dev, NULL);
+       if (IS_ERR(host->clk)) {
+               dev_err(&pdev->dev, "failed to fetch block clock\n");
+               ret = PTR_ERR(host->clk);
+               host->clk = NULL;
+               goto err_probe1;
+       }
+
+       ret = clk_enable(host->clk);
+       if (ret)
+               goto err_probe1;
+
+       host->bank = pdata->bank;
+       host->select_chip = pdata->select_bank;
+       regs = host->regs_va;
+
+       /* Link all private pointers */
+       mtd = &host->mtd;
+       nand = &host->nand;
+       mtd->priv = nand;
+       nand->priv = host;
+
+       host->mtd.owner = THIS_MODULE;
+       nand->IO_ADDR_R = host->data_va;
+       nand->IO_ADDR_W = host->data_va;
+       nand->cmd_ctrl = fsmc_cmd_ctrl;
+       nand->chip_delay = 30;
+
+       nand->ecc.mode = NAND_ECC_HW;
+       nand->ecc.hwctl = fsmc_enable_hwecc;
+       nand->ecc.size = 512;
+       nand->options = pdata->options;
+       nand->select_chip = fsmc_select_chip;
+
+       if (pdata->width == FSMC_NAND_BW16)
+               nand->options |= NAND_BUSWIDTH_16;
+
+       fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16);
+
+       if (get_fsmc_version(host->regs_va) == FSMC_VER8) {
+               nand->ecc.read_page = fsmc_read_page_hwecc;
+               nand->ecc.calculate = fsmc_read_hwecc_ecc4;
+               nand->ecc.correct = fsmc_correct_data;
+               nand->ecc.bytes = 13;
+       } else {
+               nand->ecc.calculate = fsmc_read_hwecc_ecc1;
+               nand->ecc.correct = nand_correct_data;
+               nand->ecc.bytes = 3;
+       }
+
+       /*
+        * Scan to find existance of the device
+        */
+       if (nand_scan_ident(&host->mtd, 1, NULL)) {
+               ret = -ENXIO;
+               dev_err(&pdev->dev, "No NAND Device found!\n");
+               goto err_probe;
+       }
+
+       if (get_fsmc_version(host->regs_va) == FSMC_VER8) {
+               if (host->mtd.writesize == 512) {
+                       nand->ecc.layout = &fsmc_ecc4_sp_layout;
+                       host->ecc_place = &fsmc_ecc4_sp_place;
+               } else {
+                       nand->ecc.layout = &fsmc_ecc4_lp_layout;
+                       host->ecc_place = &fsmc_ecc4_lp_place;
+               }
+       } else {
+               nand->ecc.layout = &fsmc_ecc1_layout;
+       }
+
+       /* Second stage of scan to fill MTD data-structures */
+       if (nand_scan_tail(&host->mtd)) {
+               ret = -ENXIO;
+               goto err_probe;
+       }
+
+       /*
+        * The partition information can is accessed by (in the same precedence)
+        *
+        * command line through Bootloader,
+        * platform data,
+        * default partition information present in driver.
+        */
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+       /*
+        * Check if partition info passed via command line
+        */
+       host->mtd.name = "nand";
+       nr_parts = parse_mtd_partitions(&host->mtd, part_probes,
+                       &host->partitions, 0);
+       if (nr_parts > 0) {
+               host->nr_partitions = nr_parts;
+       } else {
+#endif
+               /*
+                * Check if partition info passed via command line
+                */
+               if (pdata->partitions) {
+                       host->partitions = pdata->partitions;
+                       host->nr_partitions = pdata->nr_partitions;
+               } else {
+                       struct mtd_partition *partition;
+                       int i;
+
+                       /* Select the default partitions info */
+                       switch (host->mtd.size) {
+                       case 0x01000000:
+                       case 0x02000000:
+                       case 0x04000000:
+                               host->partitions = partition_info_16KB_blk;
+                               host->nr_partitions =
+                                       sizeof(partition_info_16KB_blk) /
+                                       sizeof(struct mtd_partition);
+                               break;
+                       case 0x08000000:
+                       case 0x10000000:
+                       case 0x20000000:
+                       case 0x40000000:
+                               host->partitions = partition_info_128KB_blk;
+                               host->nr_partitions =
+                                       sizeof(partition_info_128KB_blk) /
+                                       sizeof(struct mtd_partition);
+                               break;
+                       default:
+                               ret = -ENXIO;
+                               pr_err("Unsupported NAND size\n");
+                               goto err_probe;
+                       }
+
+                       partition = host->partitions;
+                       for (i = 0; i < host->nr_partitions; i++, partition++) {
+                               if (partition->size == 0) {
+                                       partition->size = host->mtd.size -
+                                               partition->offset;
+                                       break;
+                               }
+                       }
+               }
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+       }
+#endif
+
+       if (host->partitions) {
+               ret = add_mtd_partitions(&host->mtd, host->partitions,
+                               host->nr_partitions);
+               if (ret)
+                       goto err_probe;
+       }
+#else
+       dev_info(&pdev->dev, "Registering %s as whole device\n", mtd->name);
+       if (!add_mtd_device(mtd)) {
+               ret = -ENXIO;
+               goto err_probe;
+       }
+#endif
+
+       platform_set_drvdata(pdev, host);
+       dev_info(&pdev->dev, "FSMC NAND driver registration successful\n");
+       return 0;
+
+err_probe:
+       clk_disable(host->clk);
+err_probe1:
+       if (host->clk)
+               clk_put(host->clk);
+       if (host->regs_va)
+               iounmap(host->regs_va);
+       if (host->resregs)
+               release_mem_region(host->resregs->start,
+                               resource_size(host->resregs));
+       if (host->cmd_va)
+               iounmap(host->cmd_va);
+       if (host->rescmd)
+               release_mem_region(host->rescmd->start,
+                               resource_size(host->rescmd));
+       if (host->addr_va)
+               iounmap(host->addr_va);
+       if (host->resaddr)
+               release_mem_region(host->resaddr->start,
+                               resource_size(host->resaddr));
+       if (host->data_va)
+               iounmap(host->data_va);
+       if (host->resdata)
+               release_mem_region(host->resdata->start,
+                               resource_size(host->resdata));
+
+       kfree(host);
+       return ret;
+}
+
+/*
+ * Clean up routine
+ */
+static int fsmc_nand_remove(struct platform_device *pdev)
+{
+       struct fsmc_nand_data *host = platform_get_drvdata(pdev);
+
+       platform_set_drvdata(pdev, NULL);
+
+       if (host) {
+#ifdef CONFIG_MTD_PARTITIONS
+               del_mtd_partitions(&host->mtd);
+#else
+               del_mtd_device(&host->mtd);
+#endif
+               clk_disable(host->clk);
+               clk_put(host->clk);
+
+               iounmap(host->regs_va);
+               release_mem_region(host->resregs->start,
+                               resource_size(host->resregs));
+               iounmap(host->cmd_va);
+               release_mem_region(host->rescmd->start,
+                               resource_size(host->rescmd));
+               iounmap(host->addr_va);
+               release_mem_region(host->resaddr->start,
+                               resource_size(host->resaddr));
+               iounmap(host->data_va);
+               release_mem_region(host->resdata->start,
+                               resource_size(host->resdata));
+
+               kfree(host);
+       }
+       return 0;
+}
+
+#ifdef CONFIG_PM
+static int fsmc_nand_suspend(struct device *dev)
+{
+       struct fsmc_nand_data *host = dev_get_drvdata(dev);
+       if (host)
+               clk_disable(host->clk);
+       return 0;
+}
+
+static int fsmc_nand_resume(struct device *dev)
+{
+       struct fsmc_nand_data *host = dev_get_drvdata(dev);
+       if (host)
+               clk_enable(host->clk);
+       return 0;
+}
+
+static const struct dev_pm_ops fsmc_nand_pm_ops = {
+       .suspend = fsmc_nand_suspend,
+       .resume = fsmc_nand_resume,
+};
+#endif
+
+static struct platform_driver fsmc_nand_driver = {
+       .remove = fsmc_nand_remove,
+       .driver = {
+               .owner = THIS_MODULE,
+               .name = "fsmc-nand",
+#ifdef CONFIG_PM
+               .pm = &fsmc_nand_pm_ops,
+#endif
+       },
+};
+
+static int __init fsmc_nand_init(void)
+{
+       return platform_driver_probe(&fsmc_nand_driver,
+                                    fsmc_nand_probe);
+}
+module_init(fsmc_nand_init);
+
+static void __exit fsmc_nand_exit(void)
+{
+       platform_driver_unregister(&fsmc_nand_driver);
+}
+module_exit(fsmc_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>, Ashish Priyadarshi");
+MODULE_DESCRIPTION("NAND driver for SPEAr Platforms");
diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h
new file mode 100644 (file)
index 0000000..5d25567
--- /dev/null
@@ -0,0 +1,181 @@
+/*
+ * incude/mtd/fsmc.h
+ *
+ * ST Microelectronics
+ * Flexible Static Memory Controller (FSMC)
+ * platform data interface and header file
+ *
+ * Copyright © 2010 ST Microelectronics
+ * Vipin Kumar <vipin.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MTD_FSMC_H
+#define __MTD_FSMC_H
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/types.h>
+#include <linux/mtd/partitions.h>
+#include <asm/param.h>
+
+#define FSMC_NAND_BW8          1
+#define FSMC_NAND_BW16         2
+
+/*
+ * The placement of the Command Latch Enable (CLE) and
+ * Address Latch Enable (ALE) is twised around in the
+ * SPEAR310 implementation.
+ */
+#if defined(CONFIG_MACH_SPEAR310)
+#define PLAT_NAND_CLE          (1 << 17)
+#define PLAT_NAND_ALE          (1 << 16)
+#else
+#define PLAT_NAND_CLE          (1 << 16)
+#define PLAT_NAND_ALE          (1 << 17)
+#endif
+
+#define FSMC_MAX_NOR_BANKS     4
+#define FSMC_MAX_NAND_BANKS    4
+
+#define FSMC_FLASH_WIDTH8      1
+#define FSMC_FLASH_WIDTH16     2
+
+struct fsmc_nor_bank_regs {
+       uint32_t ctrl;
+       uint32_t ctrl_tim;
+};
+
+/* ctrl register definitions */
+#define BANK_ENABLE            (1 << 0)
+#define MUXED                  (1 << 1)
+#define NOR_DEV                        (2 << 2)
+#define WIDTH_8                        (0 << 4)
+#define WIDTH_16               (1 << 4)
+#define RSTPWRDWN              (1 << 6)
+#define WPROT                  (1 << 7)
+#define WRT_ENABLE             (1 << 12)
+#define WAIT_ENB               (1 << 13)
+
+/* ctrl_tim register definitions */
+
+struct fsms_nand_bank_regs {
+       uint32_t pc;
+       uint32_t sts;
+       uint32_t comm;
+       uint32_t attrib;
+       uint32_t ioata;
+       uint32_t ecc1;
+       uint32_t ecc2;
+       uint32_t ecc3;
+};
+
+#define FSMC_NOR_REG_SIZE      0x40
+
+struct fsmc_regs {
+       struct fsmc_nor_bank_regs nor_bank_regs[FSMC_MAX_NOR_BANKS];
+       uint8_t reserved_1[0x40 - 0x20];
+       struct fsms_nand_bank_regs bank_regs[FSMC_MAX_NAND_BANKS];
+       uint8_t reserved_2[0xfe0 - 0xc0];
+       uint32_t peripid0;                      /* 0xfe0 */
+       uint32_t peripid1;                      /* 0xfe4 */
+       uint32_t peripid2;                      /* 0xfe8 */
+       uint32_t peripid3;                      /* 0xfec */
+       uint32_t pcellid0;                      /* 0xff0 */
+       uint32_t pcellid1;                      /* 0xff4 */
+       uint32_t pcellid2;                      /* 0xff8 */
+       uint32_t pcellid3;                      /* 0xffc */
+};
+
+#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
+
+/* pc register definitions */
+#define FSMC_RESET             (1 << 0)
+#define FSMC_WAITON            (1 << 1)
+#define FSMC_ENABLE            (1 << 2)
+#define FSMC_DEVTYPE_NAND      (1 << 3)
+#define FSMC_DEVWID_8          (0 << 4)
+#define FSMC_DEVWID_16         (1 << 4)
+#define FSMC_ECCEN             (1 << 6)
+#define FSMC_ECCPLEN_512       (0 << 7)
+#define FSMC_ECCPLEN_256       (1 << 7)
+#define FSMC_TCLR_1            (1 << 9)
+#define FSMC_TAR_1             (1 << 13)
+
+/* sts register definitions */
+#define FSMC_CODE_RDY          (1 << 15)
+
+/* comm register definitions */
+#define FSMC_TSET_0            (0 << 0)
+#define FSMC_TWAIT_6           (6 << 8)
+#define FSMC_THOLD_4           (4 << 16)
+#define FSMC_THIZ_1            (1 << 24)
+
+/* peripid2 register definitions */
+#define FSMC_REVISION_MSK      (0xf)
+#define FSMC_REVISION_SHFT     (0x4)
+
+#define FSMC_VER1              1
+#define FSMC_VER2              2
+#define FSMC_VER3              3
+#define FSMC_VER4              4
+#define FSMC_VER5              5
+#define FSMC_VER6              6
+#define FSMC_VER7              7
+#define FSMC_VER8              8
+
+static inline uint32_t get_fsmc_version(struct fsmc_regs *regs)
+{
+       return (readl(&regs->peripid2) >> FSMC_REVISION_SHFT) &
+                               FSMC_REVISION_MSK;
+}
+
+/*
+ * There are 13 bytes of ecc for every 512 byte block in FSMC version 8
+ * and it has to be read consecutively and immediately after the 512
+ * byte data block for hardware to generate the error bit offsets
+ * Managing the ecc bytes in the following way is easier. This way is
+ * similar to oobfree structure maintained already in u-boot nand driver
+ */
+#define MAX_ECCPLACE_ENTRIES   32
+
+struct fsmc_nand_eccplace {
+       uint8_t offset;
+       uint8_t length;
+};
+
+struct fsmc_eccplace {
+       struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES];
+};
+
+/**
+ * fsmc_nand_platform_data - platform specific NAND controller config
+ * @partitions: partition table for the platform, use a default fallback
+ * if this is NULL
+ * @nr_partitions: the number of partitions in the previous entry
+ * @options: different options for the driver
+ * @width: bus width
+ * @bank: default bank
+ * @select_bank: callback to select a certain bank, this is
+ * platform-specific. If the controller only supports one bank
+ * this may be set to NULL
+ */
+struct fsmc_nand_platform_data {
+       struct mtd_partition    *partitions;
+       unsigned int            nr_partitions;
+       unsigned int            options;
+       unsigned int            width;
+       unsigned int            bank;
+       void                    (*select_bank)(uint32_t bank, uint32_t busw);
+};
+
+extern int __init fsmc_nor_init(struct platform_device *pdev,
+               unsigned long base, uint32_t bank, uint32_t width);
+extern void __init fsmc_init_board_info(struct platform_device *pdev,
+               struct mtd_partition *partitions, unsigned int nr_partitions,
+               unsigned int width);
+
+#endif /* __MTD_FSMC_H */