i2c: piix4: Support alternative port selection register

The SB800 register reference guide says that the SMBus port selection
bits may not always be in register Smbus0En (0x2c) but could
alternatively be found in register Smbus0Sel (0x2e) depending on the
settings in register Smbus0SelEn (0x2f.) Add support for this
configuration.

The "alternative" register is the only one working for the Bolton
(aka Hudson-2) chipset anyway. I do not have any documentation for
the "kerncz" chipset so we treat it the same as the Bolton for now.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Christian Fetzer <fetzer.ch@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 93f2895383ee55bb9f060cf145af92adbbeb512e..78d4483d2d5c79d94e36d4aec53ccede4d92577d 100644 (file)
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -85,8 +85,14 @@
 /* SB800 constants */
 #define SB800_PIIX4_SMB_IDX            0xcd6
 
-/* SB800 port is selected by bits 2:1 of the smb_en register (0x2c) */
+/*
+ * SB800 port is selected by bits 2:1 of the smb_en register (0x2c)
+ * or the smb_sel register (0x2e), depending on bit 0 of register 0x2f.
+ * Hudson-2/Bolton port is always selected by bits 2:1 of register 0x2f.
+ */
 #define SB800_PIIX4_PORT_IDX           0x2c
+#define SB800_PIIX4_PORT_IDX_ALT       0x2e
+#define SB800_PIIX4_PORT_IDX_SEL       0x2f
 #define SB800_PIIX4_PORT_IDX_MASK      0x06
 
 /* insmod parameters */
@@ -136,8 +142,13 @@ static const struct dmi_system_id piix4_dmi_ibm[] = {
        { },
 };
 
-/* SB800 globals */
+/*
+ * SB800 globals
+ * piix4_mutex_sb800 protects piix4_port_sel_sb800 and the pair
+ * of I/O ports at SB800_PIIX4_SMB_IDX.
+ */
 static DEFINE_MUTEX(piix4_mutex_sb800);
+static u8 piix4_port_sel_sb800;
 static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = {
        " port 0", " port 2", " port 3", " port 4"
 };
@@ -254,7 +265,7 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
                             const struct pci_device_id *id, u8 aux)
 {
        unsigned short piix4_smba;
-       u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
+       u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel;
        u8 i2ccfg, i2ccfg_offset = 0x10;
 
        /* SB800 and later SMBus does not support forcing address */
@@ -334,6 +345,23 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
                 "SMBus Host Controller at 0x%x, revision %d\n",
                 piix4_smba, i2ccfg >> 4);
 
+       /* Find which register is used for port selection */
+       if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD) {
+               piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
+       } else {
+               mutex_lock(&piix4_mutex_sb800);
+               outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX);
+               port_sel = inb_p(SB800_PIIX4_SMB_IDX + 1);
+               piix4_port_sel_sb800 = (port_sel & 0x01) ?
+                                      SB800_PIIX4_PORT_IDX_ALT :
+                                      SB800_PIIX4_PORT_IDX;
+               mutex_unlock(&piix4_mutex_sb800);
+       }
+
+       dev_info(&PIIX4_dev->dev,
+                "Using register 0x%02x for SMBus port selection\n",
+                (unsigned int)piix4_port_sel_sb800);
+
        return piix4_smba;
 }
 
@@ -563,7 +591,7 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
 
        mutex_lock(&piix4_mutex_sb800);
 
-       outb_p(SB800_PIIX4_PORT_IDX, SB800_PIIX4_SMB_IDX);
+       outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
        smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
 
        port = adapdata->port;