ath9k: cleanup beacon parameters configuration
authorVasanthakumar Thiagarajan <vasanth@atheros.com>
Fri, 15 May 2009 13:29:22 +0000 (18:59 +0530)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 20 May 2009 18:46:26 +0000 (14:46 -0400)
This patch configures the beacon timers with beacon interval
and beacon period passed through vif.bss_conf. Also cache the
currecnt beacon configuration which will be used to configure
the beacon timers when the driver triggers it after reset.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath9k/ath9k.h
drivers/net/wireless/ath/ath9k/beacon.c

index 34256621d41798d8124b511366a166f40764c7aa..bd2363f075cfd8fb4cf8fe15cf2e852fd0ca0c0c 100644 (file)
@@ -600,6 +600,7 @@ struct ath_softc {
        struct ath9k_debug debug;
 #endif
        struct ath_bus_ops *bus_ops;
+       struct ath_beacon_config cur_beacon_conf;
 };
 
 struct ath_wiphy {
index af5edb840adec893b4d3ddf22a3fa06a4490e184..57f91a9ff0eb32bfa16b9e17f6c17cc7e553b7a5 100644 (file)
@@ -695,43 +695,50 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
        sc->beacon.bmisscnt = 0;
        ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 
-       if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
+       /* FIXME: Handle properly when vif is NULL */
+       if (vif && sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
                ath_beacon_start_adhoc(sc, vif);
 }
 
 void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
 {
-       struct ath_beacon_config conf;
+       struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
+       enum nl80211_iftype iftype;
 
        /* Setup the beacon configuration parameters */
 
-       memset(&conf, 0, sizeof(struct ath_beacon_config));
-       conf.beacon_interval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
-       conf.listen_interval = 1;
-       conf.dtim_period = conf.beacon_interval;
-       conf.dtim_count = 1;
-       conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval;
-
        if (vif) {
-               struct ath_vif *avp = (struct ath_vif *)vif->drv_priv;
-
-               switch(avp->av_opmode) {
-               case NL80211_IFTYPE_AP:
-                       ath_beacon_config_ap(sc, &conf);
-                       break;
-               case NL80211_IFTYPE_ADHOC:
-               case NL80211_IFTYPE_MESH_POINT:
-                       ath_beacon_config_adhoc(sc, &conf, vif);
-                       break;
-               case NL80211_IFTYPE_STATION:
-                       ath_beacon_config_sta(sc, &conf);
-                       break;
-               default:
-                       DPRINTF(sc, ATH_DBG_CONFIG,
-                               "Unsupported beaconing mode\n");
-                       return;
-               }
+               struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+
+               iftype = vif->type;
 
-               sc->sc_flags |= SC_OP_BEACONS;
+               cur_conf->beacon_interval = bss_conf->beacon_int;
+               cur_conf->dtim_period = bss_conf->dtim_period;
+               cur_conf->listen_interval = 1;
+               cur_conf->dtim_count = 1;
+               cur_conf->bmiss_timeout =
+                       ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval;
+       } else {
+               iftype = sc->sc_ah->opmode;
        }
+
+
+       switch (iftype) {
+       case NL80211_IFTYPE_AP:
+               ath_beacon_config_ap(sc, cur_conf);
+               break;
+       case NL80211_IFTYPE_ADHOC:
+       case NL80211_IFTYPE_MESH_POINT:
+               ath_beacon_config_adhoc(sc, cur_conf, vif);
+               break;
+       case NL80211_IFTYPE_STATION:
+               ath_beacon_config_sta(sc, cur_conf);
+               break;
+       default:
+               DPRINTF(sc, ATH_DBG_CONFIG,
+                       "Unsupported beaconing mode\n");
+               return;
+       }
+
+       sc->sc_flags |= SC_OP_BEACONS;
 }