ARM: i.MX: mx21ads: Use fixed voltage regulator for LCD power

Instead of using init() and exit() hooks from framebuffer driver
to control power of LCD, introduce fixed voltage regulator for
this purpose.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 87425949244a634c29cc6247a726377c7f73a185..0b8e63fdbca0d31486d8f278821b85e37364ff77 100644 (file)
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -19,6 +19,8 @@
 #include <linux/mtd/physmap.h>
 #include <linux/basic_mmio_gpio.h>
 #include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -191,22 +193,32 @@ static struct platform_device mx21ads_mmgpio = {
        },
 };
 
-static int mx21ads_fb_init(struct platform_device *pdev)
-{
-       int ret;
+static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer =
+       REGULATOR_SUPPLY("lcd", "imx-fb.0");
 
-       ret = gpio_request(MX21ADS_IO_LCDON, "fb-lcdon");
-       if (ret)
-               return ret;
+static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
+       .constraints = {
+               .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+       },
+       .consumer_supplies      = &mx21ads_lcd_regulator_consumer,
+       .num_consumer_supplies  = 1,
+};
 
-       return gpio_direction_output(MX21ADS_IO_LCDON, 1);
-}
+static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
+       .supply_name    = "LCD",
+       .microvolts     = 3300000,
+       .gpio           = MX21ADS_IO_LCDON,
+       .enable_high    = 1,
+       .init_data      = &mx21ads_lcd_regulator_init_data,
+};
 
-static void mx21ads_fb_exit(struct platform_device *pdev)
-{
-       gpio_set_value(MX21ADS_IO_LCDON, 0);
-       gpio_free(MX21ADS_IO_LCDON);
-}
+static struct platform_device mx21ads_lcd_regulator = {
+       .name = "reg-fixed-voltage",
+       .id = PLATFORM_DEVID_AUTO,
+       .dev = {
+               .platform_data = &mx21ads_lcd_regulator_pdata,
+       },
+};
 
 /*
  * Connected is a portrait Sharp-QVGA display
@@ -239,9 +251,6 @@ static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
        .pwmr           = 0x00a903ff,
        .lscr1          = 0x00120300,
        .dmacr          = 0x00020008,
-
-       .init = mx21ads_fb_init,
-       .exit = mx21ads_fb_exit,
 };
 
 static int mx21ads_sdhc_get_ro(struct device *dev)
@@ -283,6 +292,7 @@ mx21ads_nand_board_info __initconst = {
 
 static struct platform_device *platform_devices[] __initdata = {
        &mx21ads_mmgpio,
+       &mx21ads_lcd_regulator,
        &mx21ads_nor_mtd_device,
 };
 
@@ -296,12 +306,13 @@ static void __init mx21ads_board_init(void)
        imx21_add_imx_uart0(&uart_pdata_rts);
        imx21_add_imx_uart2(&uart_pdata_norts);
        imx21_add_imx_uart3(&uart_pdata_rts);
-       imx21_add_imx_fb(&mx21ads_fb_data);
        imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
        imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
+       imx21_add_imx_fb(&mx21ads_fb_data);
+
        mx21ads_cs8900_resources[1].start =
                        gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
        mx21ads_cs8900_resources[1].end =