struct nvc0_pm_state {
struct nouveau_pm_level *perflvl;
struct nvc0_pm_clock eng[16];
+ struct nvc0_pm_clock mem;
};
static u32
return 0;
}
+static int
+calc_mem(struct drm_device *dev, struct nvc0_pm_clock *info, u32 freq)
+{
+ struct pll_lims pll;
+ int N, M, P, ret;
+ u32 ctrl;
+
+ /* mclk pll input freq comes from another pll, make sure it's on */
+ ctrl = nv_rd32(dev, 0x132020);
+ if (!(ctrl & 0x00000001)) {
+ /* if not, program it to 567MHz. nfi where this value comes
+ * from - it looks like it's in the pll limits table for
+ * 132000 but the binary driver ignores all my attempts to
+ * change this value.
+ */
+ nv_wr32(dev, 0x137320, 0x00000103);
+ nv_wr32(dev, 0x137330, 0x81200606);
+ nv_wait(dev, 0x132020, 0x00010000, 0x00010000);
+ nv_wr32(dev, 0x132024, 0x0001150f);
+ nv_mask(dev, 0x132020, 0x00000001, 0x00000001);
+ nv_wait(dev, 0x137390, 0x00020000, 0x00020000);
+ nv_mask(dev, 0x132020, 0x00000004, 0x00000004);
+ }
+
+ /* for the moment, until the clock tree is better understood, use
+ * pll mode for all clock frequencies
+ */
+ ret = get_pll_limits(dev, 0x132000, &pll);
+ if (ret == 0) {
+ pll.refclk = read_pll(dev, 0x132020);
+ if (pll.refclk) {
+ ret = nva3_calc_pll(dev, &pll, freq, &N, NULL, &M, &P);
+ if (ret > 0) {
+ info->coef = (P << 16) | (N << 8) | M;
+ return 0;
+ }
+ }
+ }
+
+ return -EINVAL;
+}
+
void *
nvc0_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl)
{
return ERR_PTR(ret);
}
+ if (perflvl->memory) {
+ ret = calc_mem(dev, &info->mem, perflvl->memory);
+ if (ret) {
+ kfree(info);
+ return ERR_PTR(ret);
+ }
+ }
+
info->perflvl = perflvl;
return info;
}