/******************************************************************************
- * netif.h
+ * xen_netif.h
*
* Unified network-device I/O interface for Xen guest OSes.
*
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
* Copyright (c) 2003-2004, Keir Fraser
*/
-#ifndef __XEN_PUBLIC_IO_NETIF_H__
-#define __XEN_PUBLIC_IO_NETIF_H__
+#ifndef __XEN_PUBLIC_IO_XEN_NETIF_H__
+#define __XEN_PUBLIC_IO_XEN_NETIF_H__
-#include <xen/interface/io/ring.h>
-#include <xen/interface/grant_table.h>
+#include "ring.h"
+#include "../grant_table.h"
/*
* Older implementation of Xen network frontend / backend has an
* that it cannot safely queue packets (as it may not be kicked to send them).
*/
- /*
+/*
* "feature-split-event-channels" is introduced to separate guest TX
- * and RX notificaion. Backend either doesn't support this feature or
- * advertise it via xenstore as 0 (disabled) or 1 (enabled).
+ * and RX notification. Backend either doesn't support this feature or
+ * advertises it via xenstore as 0 (disabled) or 1 (enabled).
*
* To make use of this feature, frontend should allocate two event
* channels for TX and RX, advertise them to backend as
*/
/*
- * This is the 'wire' format for packets:
- * Request 1: xen_netif_tx_request -- XEN_NETTXF_* (any flags)
- * [Request 2: xen_netif_extra_info] (only if request 1 has XEN_NETTXF_extra_info)
- * [Request 3: xen_netif_extra_info] (only if request 2 has XEN_NETIF_EXTRA_MORE)
- * Request 4: xen_netif_tx_request -- XEN_NETTXF_more_data
- * Request 5: xen_netif_tx_request -- XEN_NETTXF_more_data
+ * "feature-multicast-control" and "feature-dynamic-multicast-control"
+ * advertise the capability to filter ethernet multicast packets in the
+ * backend. If the frontend wishes to take advantage of this feature then
+ * it may set "request-multicast-control". If the backend only advertises
+ * "feature-multicast-control" then "request-multicast-control" must be set
+ * before the frontend moves into the connected state. The backend will
+ * sample the value on this state transition and any subsequent change in
+ * value will have no effect. However, if the backend also advertises
+ * "feature-dynamic-multicast-control" then "request-multicast-control"
+ * may be set by the frontend at any time. In this case, the backend will
+ * watch the value and re-sample on watch events.
+ *
+ * If the sampled value of "request-multicast-control" is set then the
+ * backend transmit side should no longer flood multicast packets to the
+ * frontend, it should instead drop any multicast packet that does not
+ * match in a filter list.
+ * The list is amended by the frontend by sending dummy transmit requests
+ * containing XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL} extra-info fragments as
+ * specified below.
+ * Note that the filter list may be amended even if the sampled value of
+ * "request-multicast-control" is not set, however the filter should only
+ * be applied if it is set.
+ */
+
+/*
+ * Control ring
+ * ============
+ *
+ * Some features, such as hashing (detailed below), require a
+ * significant amount of out-of-band data to be passed from frontend to
+ * backend. Use of xenstore is not suitable for large quantities of data
+ * because of quota limitations and so a dedicated 'control ring' is used.
+ * The ability of the backend to use a control ring is advertised by
+ * setting:
+ *
+ * /local/domain/X/backend/<domid>/<vif>/feature-ctrl-ring = "1"
+ *
+ * The frontend provides a control ring to the backend by setting:
+ *
+ * /local/domain/<domid>/device/vif/<vif>/ctrl-ring-ref = <gref>
+ * /local/domain/<domid>/device/vif/<vif>/event-channel-ctrl = <port>
+ *
+ * where <gref> is the grant reference of the shared page used to
+ * implement the control ring and <port> is an event channel to be used
+ * as a mailbox interrupt. These keys must be set before the frontend
+ * moves into the connected state.
+ *
+ * The control ring uses a fixed request/response message size and is
+ * balanced (i.e. one request to one response), so operationally it is much
+ * the same as a transmit or receive ring.
+ * Note that there is no requirement that responses are issued in the same
+ * order as requests.
+ */
+
+/*
+ * Hash types
+ * ==========
+ *
+ * For the purposes of the definitions below, 'Packet[]' is an array of
+ * octets containing an IP packet without options, 'Array[X..Y]' means a
+ * sub-array of 'Array' containing bytes X thru Y inclusive, and '+' is
+ * used to indicate concatenation of arrays.
+ */
+
+/*
+ * A hash calculated over an IP version 4 header as follows:
+ *
+ * Buffer[0..8] = Packet[12..15] (source address) +
+ * Packet[16..19] (destination address)
+ *
+ * Result = Hash(Buffer, 8)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV4 0
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV4 \
+ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4)
+
+/*
+ * A hash calculated over an IP version 4 header and TCP header as
+ * follows:
+ *
+ * Buffer[0..12] = Packet[12..15] (source address) +
+ * Packet[16..19] (destination address) +
+ * Packet[20..21] (source port) +
+ * Packet[22..23] (destination port)
+ *
+ * Result = Hash(Buffer, 12)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP 1
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP \
+ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP)
+
+/*
+ * A hash calculated over an IP version 6 header as follows:
+ *
+ * Buffer[0..32] = Packet[8..23] (source address ) +
+ * Packet[24..39] (destination address)
+ *
+ * Result = Hash(Buffer, 32)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV6 2
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV6 \
+ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6)
+
+/*
+ * A hash calculated over an IP version 6 header and TCP header as
+ * follows:
+ *
+ * Buffer[0..36] = Packet[8..23] (source address) +
+ * Packet[24..39] (destination address) +
+ * Packet[40..41] (source port) +
+ * Packet[42..43] (destination port)
+ *
+ * Result = Hash(Buffer, 36)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP 3
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP \
+ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP)
+
+/*
+ * Hash algorithms
+ * ===============
+ */
+
+#define XEN_NETIF_CTRL_HASH_ALGORITHM_NONE 0
+
+/*
+ * Toeplitz hash:
+ */
+
+#define XEN_NETIF_CTRL_HASH_ALGORITHM_TOEPLITZ 1
+
+/*
+ * This algorithm uses a 'key' as well as the data buffer itself.
+ * (Buffer[] and Key[] are treated as shift-registers where the MSB of
+ * Buffer/Key[0] is considered 'left-most' and the LSB of Buffer/Key[N-1]
+ * is the 'right-most').
+ *
+ * Value = 0
+ * For number of bits in Buffer[]
+ * If (left-most bit of Buffer[] is 1)
+ * Value ^= left-most 32 bits of Key[]
+ * Key[] << 1
+ * Buffer[] << 1
+ *
+ * The code below is provided for convenience where an operating system
+ * does not already provide an implementation.
+ */
+#ifdef XEN_NETIF_DEFINE_TOEPLITZ
+static uint32_t xen_netif_toeplitz_hash(const uint8_t *key,
+ unsigned int keylen,
+ const uint8_t *buf, unsigned int buflen)
+{
+ unsigned int keyi, bufi;
+ uint64_t prefix = 0;
+ uint64_t hash = 0;
+
+ /* Pre-load prefix with the first 8 bytes of the key */
+ for (keyi = 0; keyi < 8; keyi++) {
+ prefix <<= 8;
+ prefix |= (keyi < keylen) ? key[keyi] : 0;
+ }
+
+ for (bufi = 0; bufi < buflen; bufi++) {
+ uint8_t byte = buf[bufi];
+ unsigned int bit;
+
+ for (bit = 0; bit < 8; bit++) {
+ if (byte & 0x80)
+ hash ^= prefix;
+ prefix <<= 1;
+ byte <<= 1;
+ }
+
+ /*
+ * 'prefix' has now been left-shifted by 8, so
+ * OR in the next byte.
+ */
+ prefix |= (keyi < keylen) ? key[keyi] : 0;
+ keyi++;
+ }
+
+ /* The valid part of the hash is in the upper 32 bits. */
+ return hash >> 32;
+}
+#endif /* XEN_NETIF_DEFINE_TOEPLITZ */
+
+/*
+ * Control requests (struct xen_netif_ctrl_request)
+ * ================================================
+ *
+ * All requests have the following format:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | type | data[0] |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | data[1] | data[2] |
+ * +-----+-----+-----+-----+-----------------------+
+ *
+ * id: the request identifier, echoed in response.
+ * type: the type of request (see below)
+ * data[]: any data associated with the request (determined by type)
+ */
+
+struct xen_netif_ctrl_request {
+ uint16_t id;
+ uint16_t type;
+
+#define XEN_NETIF_CTRL_TYPE_INVALID 0
+#define XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS 1
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS 2
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_KEY 3
+#define XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE 4
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE 5
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING 6
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM 7
+
+ uint32_t data[3];
+};
+
+/*
+ * Control responses (struct xen_netif_ctrl_response)
+ * ==================================================
+ *
+ * All responses have the following format:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | type | status |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | data |
+ * +-----+-----+-----+-----+
+ *
+ * id: the corresponding request identifier
+ * type: the type of the corresponding request
+ * status: the status of request processing
+ * data: any data associated with the response (determined by type and
+ * status)
+ */
+
+struct xen_netif_ctrl_response {
+ uint16_t id;
+ uint16_t type;
+ uint32_t status;
+
+#define XEN_NETIF_CTRL_STATUS_SUCCESS 0
+#define XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED 1
+#define XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER 2
+#define XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW 3
+
+ uint32_t data;
+};
+
+/*
+ * Control messages
+ * ================
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM
+ * --------------------------------------
+ *
+ * This is sent by the frontend to set the desired hash algorithm.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM
+ * data[0] = a XEN_NETIF_CTRL_HASH_ALGORITHM_* value
+ * data[1] = 0
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - The algorithm is not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ *
+ * NOTE: Setting data[0] to XEN_NETIF_CTRL_HASH_ALGORITHM_NONE disables
+ * hashing and the backend is free to choose how it steers packets
+ * to queues (which is the default behaviour).
+ *
+ * XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS
+ * ----------------------------------
+ *
+ * This is sent by the frontend to query the types of hash supported by
+ * the backend.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS
+ * data[0] = 0
+ * data[1] = 0
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not supported
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = supported hash types (if operation was successful)
+ *
+ * NOTE: A valid hash algorithm must be selected before this operation can
+ * succeed.
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS
+ * ----------------------------------
+ *
+ * This is sent by the frontend to set the types of hash that the backend
+ * should calculate. (See above for hash type definitions).
+ * Note that the 'maximal' type of hash should always be chosen. For
+ * example, if the frontend sets both IPV4 and IPV4_TCP hash types then
+ * the latter hash type should be calculated for any TCP packet and the
+ * former only calculated for non-TCP packets.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS
+ * data[0] = bitwise OR of XEN_NETIF_CTRL_HASH_TYPE_* values
+ * data[1] = 0
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - One or more flag
+ * value is invalid or
+ * unsupported
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = 0
+ *
+ * NOTE: A valid hash algorithm must be selected before this operation can
+ * succeed.
+ * Also, setting data[0] to zero disables hashing and the backend
+ * is free to choose how it steers packets to queues.
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_KEY
+ * --------------------------------
+ *
+ * This is sent by the frontend to set the key of the hash if the algorithm
+ * requires it. (See hash algorithms above).
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_SET_HASH_KEY
+ * data[0] = grant reference of page containing the key (assumed to
+ * start at beginning of grant)
+ * data[1] = size of key in octets
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Key size is invalid
+ * XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW - Key size is larger
+ * than the backend
+ * supports
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = 0
+ *
+ * NOTE: Any key octets not specified are assumed to be zero (the key
+ * is assumed to be empty by default) and specifying a new key
+ * invalidates any previous key, hence specifying a key size of
+ * zero will clear the key (which ensures that the calculated hash
+ * will always be zero).
+ * The maximum size of key is algorithm and backend specific, but
+ * is also limited by the single grant reference.
+ * The grant reference may be read-only and must remain valid until
+ * the response has been processed.
+ *
+ * XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE
+ * -----------------------------------------
+ *
+ * This is sent by the frontend to query the maximum size of mapping
+ * table supported by the backend. The size is specified in terms of
+ * table entries.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE
+ * data[0] = 0
+ * data[1] = 0
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not supported
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = maximum number of entries allowed in the mapping table
+ * (if operation was successful) or zero if a mapping table is
+ * not supported (i.e. hash mapping is done only by modular
+ * arithmetic).
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
+ * -------------------------------------
+ *
+ * This is sent by the frontend to set the actual size of the mapping
+ * table to be used by the backend. The size is specified in terms of
+ * table entries.
+ * Any previous table is invalidated by this message and any new table
+ * is assumed to be zero filled.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
+ * data[0] = number of entries in mapping table
+ * data[1] = 0
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size is invalid
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = 0
+ *
+ * NOTE: Setting data[0] to 0 means that hash mapping should be done
+ * using modular arithmetic.
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING
+ * ------------------------------------
+ *
+ * This is sent by the frontend to set the content of the table mapping
+ * hash value to queue number. The backend should calculate the hash from
+ * the packet header, use it as an index into the table (modulo the size
+ * of the table) and then steer the packet to the queue number found at
+ * that index.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING
+ * data[0] = grant reference of page containing the mapping (sub-)table
+ * (assumed to start at beginning of grant)
+ * data[1] = size of (sub-)table in entries
+ * data[2] = offset, in entries, of sub-table within overall table
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size or content
+ * is invalid
+ * XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW - Table size is larger
+ * than the backend
+ * supports
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = 0
+ *
+ * NOTE: The overall table has the following format:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | mapping[0] | mapping[1] |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | . |
+ * | . |
+ * | . |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | mapping[N-2] | mapping[N-1] |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * where N is specified by a XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
+ * message and each mapping must specifies a queue between 0 and
+ * "multi-queue-num-queues" (see above).
+ * The backend may support a mapping table larger than can be
+ * mapped by a single grant reference. Thus sub-tables within a
+ * larger table can be individually set by sending multiple messages
+ * with differing offset values. Specifying a new sub-table does not
+ * invalidate any table data outside that range.
+ * The grant reference may be read-only and must remain valid until
+ * the response has been processed.
+ */
+
+DEFINE_RING_TYPES(xen_netif_ctrl,
+ struct xen_netif_ctrl_request,
+ struct xen_netif_ctrl_response);
+
+/*
+ * Guest transmit
+ * ==============
+ *
+ * This is the 'wire' format for transmit (frontend -> backend) packets:
+ *
+ * Fragment 1: xen_netif_tx_request_t - flags = XEN_NETTXF_*
+ * size = total packet size
+ * [Extra 1: xen_netif_extra_info_t] - (only if fragment 1 flags include
+ * XEN_NETTXF_extra_info)
+ * ...
+ * [Extra N: xen_netif_extra_info_t] - (only if extra N-1 flags include
+ * XEN_NETIF_EXTRA_MORE)
* ...
- * Request N: xen_netif_tx_request -- 0
+ * Fragment N: xen_netif_tx_request_t - (only if fragment N-1 flags include
+ * XEN_NETTXF_more_data - flags on preceding
+ * extras are not relevant here)
+ * flags = 0
+ * size = fragment size
+ *
+ * NOTE:
+ *
+ * This format slightly is different from that used for receive
+ * (backend -> frontend) packets. Specifically, in a multi-fragment
+ * packet the actual size of fragment 1 can only be determined by
+ * subtracting the sizes of fragments 2..N from the total packet size.
+ *
+ * Ring slot size is 12 octets, however not all request/response
+ * structs use the full size.
+ *
+ * tx request data (xen_netif_tx_request_t)
+ * ------------------------------------
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | grant ref | offset | flags |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | size |
+ * +-----+-----+-----+-----+
+ *
+ * grant ref: Reference to buffer page.
+ * offset: Offset within buffer page.
+ * flags: XEN_NETTXF_*.
+ * id: request identifier, echoed in response.
+ * size: packet size in bytes.
+ *
+ * tx response (xen_netif_tx_response_t)
+ * ---------------------------------
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | status | unused |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | unused |
+ * +-----+-----+-----+-----+
+ *
+ * id: reflects id in transmit request
+ * status: XEN_NETIF_RSP_*
+ *
+ * Guest receive
+ * =============
+ *
+ * This is the 'wire' format for receive (backend -> frontend) packets:
+ *
+ * Fragment 1: xen_netif_rx_request_t - flags = XEN_NETRXF_*
+ * size = fragment size
+ * [Extra 1: xen_netif_extra_info_t] - (only if fragment 1 flags include
+ * XEN_NETRXF_extra_info)
+ * ...
+ * [Extra N: xen_netif_extra_info_t] - (only if extra N-1 flags include
+ * XEN_NETIF_EXTRA_MORE)
+ * ...
+ * Fragment N: xen_netif_rx_request_t - (only if fragment N-1 flags include
+ * XEN_NETRXF_more_data - flags on preceding
+ * extras are not relevant here)
+ * flags = 0
+ * size = fragment size
+ *
+ * NOTE:
+ *
+ * This format slightly is different from that used for transmit
+ * (frontend -> backend) packets. Specifically, in a multi-fragment
+ * packet the size of the packet can only be determined by summing the
+ * sizes of fragments 1..N.
+ *
+ * Ring slot size is 8 octets.
+ *
+ * rx request (xen_netif_rx_request_t)
+ * -------------------------------
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | pad | gref |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * id: request identifier, echoed in response.
+ * gref: reference to incoming granted frame.
+ *
+ * rx response (xen_netif_rx_response_t)
+ * ---------------------------------
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | offset | flags | status |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * id: reflects id in receive request
+ * offset: offset in page of start of received packet
+ * flags: XEN_NETRXF_*
+ * status: -ve: XEN_NETIF_RSP_*; +ve: Rx'ed pkt size.
+ *
+ * NOTE: Historically, to support GSO on the frontend receive side, Linux
+ * netfront does not make use of the rx response id (because, as
+ * described below, extra info structures overlay the id field).
+ * Instead it assumes that responses always appear in the same ring
+ * slot as their corresponding request. Thus, to maintain
+ * compatibility, backends must make sure this is the case.
+ *
+ * Extra Info
+ * ==========
+ *
+ * Can be present if initial request or response has NET{T,R}XF_extra_info,
+ * or previous extra request has XEN_NETIF_EXTRA_MORE.
+ *
+ * The struct therefore needs to fit into either a tx or rx slot and
+ * is therefore limited to 8 octets.
+ *
+ * NOTE: Because extra info data overlays the usual request/response
+ * structures, there is no id information in the opposite direction.
+ * So, if an extra info overlays an rx response the frontend can
+ * assume that it is in the same ring slot as the request that was
+ * consumed to make the slot available, and the backend must ensure
+ * this assumption is true.
+ *
+ * extra info (xen_netif_extra_info_t)
+ * -------------------------------
+ *
+ * General format:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags| type specific data |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | padding for tx |
+ * +-----+-----+-----+-----+
+ *
+ * type: XEN_NETIF_EXTRA_TYPE_*
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * padding for tx: present only in the tx case due to 8 octet limit
+ * from rx case. Not shown in type specific entries
+ * below.
+ *
+ * XEN_NETIF_EXTRA_TYPE_GSO:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags| size |type | pad | features |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * type: Must be XEN_NETIF_EXTRA_TYPE_GSO
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * size: Maximum payload size of each segment. For example,
+ * for TCP this is just the path MSS.
+ * type: XEN_NETIF_GSO_TYPE_*: This determines the protocol of
+ * the packet and any extra features required to segment the
+ * packet properly.
+ * features: EN_XEN_NETIF_GSO_FEAT_*: This specifies any extra GSO
+ * features required to process this packet, such as ECN
+ * support for TCPv4.
+ *
+ * XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL}:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags| addr |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * type: Must be XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL}
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * addr: address to add/remove
+ *
+ * XEN_NETIF_EXTRA_TYPE_HASH:
+ *
+ * A backend that supports teoplitz hashing is assumed to accept
+ * this type of extra info in transmit packets.
+ * A frontend that enables hashing is assumed to accept
+ * this type of extra info in receive packets.
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags|htype| alg |LSB ---- value ---- MSB|
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * type: Must be XEN_NETIF_EXTRA_TYPE_HASH
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * htype: Hash type (one of _XEN_NETIF_CTRL_HASH_TYPE_* - see above)
+ * alg: The algorithm used to calculate the hash (one of
+ * XEN_NETIF_CTRL_HASH_TYPE_ALGORITHM_* - see above)
+ * value: Hash value
*/
/* Protocol checksum field is blank in the packet (hardware offload)? */
-#define _XEN_NETTXF_csum_blank (0)
-#define XEN_NETTXF_csum_blank (1U<<_XEN_NETTXF_csum_blank)
+#define _XEN_NETTXF_csum_blank (0)
+#define XEN_NETTXF_csum_blank (1U<<_XEN_NETTXF_csum_blank)
/* Packet data has been validated against protocol checksum. */
-#define _XEN_NETTXF_data_validated (1)
-#define XEN_NETTXF_data_validated (1U<<_XEN_NETTXF_data_validated)
+#define _XEN_NETTXF_data_validated (1)
+#define XEN_NETTXF_data_validated (1U<<_XEN_NETTXF_data_validated)
/* Packet continues in the next request descriptor. */
-#define _XEN_NETTXF_more_data (2)
-#define XEN_NETTXF_more_data (1U<<_XEN_NETTXF_more_data)
+#define _XEN_NETTXF_more_data (2)
+#define XEN_NETTXF_more_data (1U<<_XEN_NETTXF_more_data)
/* Packet to be followed by extra descriptor(s). */
-#define _XEN_NETTXF_extra_info (3)
-#define XEN_NETTXF_extra_info (1U<<_XEN_NETTXF_extra_info)
+#define _XEN_NETTXF_extra_info (3)
+#define XEN_NETTXF_extra_info (1U<<_XEN_NETTXF_extra_info)
#define XEN_NETIF_MAX_TX_SIZE 0xFFFF
struct xen_netif_tx_request {
- grant_ref_t gref; /* Reference to buffer page */
- uint16_t offset; /* Offset within buffer page */
- uint16_t flags; /* XEN_NETTXF_* */
- uint16_t id; /* Echoed in response message. */
- uint16_t size; /* Packet size in bytes. */
+ grant_ref_t gref;
+ uint16_t offset;
+ uint16_t flags;
+ uint16_t id;
+ uint16_t size;
};
/* Types of xen_netif_extra_info descriptors. */
-#define XEN_NETIF_EXTRA_TYPE_NONE (0) /* Never used - invalid */
-#define XEN_NETIF_EXTRA_TYPE_GSO (1) /* u.gso */
-#define XEN_NETIF_EXTRA_TYPE_MCAST_ADD (2) /* u.mcast */
-#define XEN_NETIF_EXTRA_TYPE_MCAST_DEL (3) /* u.mcast */
-#define XEN_NETIF_EXTRA_TYPE_MAX (4)
+#define XEN_NETIF_EXTRA_TYPE_NONE (0) /* Never used - invalid */
+#define XEN_NETIF_EXTRA_TYPE_GSO (1) /* u.gso */
+#define XEN_NETIF_EXTRA_TYPE_MCAST_ADD (2) /* u.mcast */
+#define XEN_NETIF_EXTRA_TYPE_MCAST_DEL (3) /* u.mcast */
+#define XEN_NETIF_EXTRA_TYPE_HASH (4) /* u.hash */
+#define XEN_NETIF_EXTRA_TYPE_MAX (5)
-/* xen_netif_extra_info flags. */
-#define _XEN_NETIF_EXTRA_FLAG_MORE (0)
-#define XEN_NETIF_EXTRA_FLAG_MORE (1U<<_XEN_NETIF_EXTRA_FLAG_MORE)
+/* xen_netif_extra_info_t flags. */
+#define _XEN_NETIF_EXTRA_FLAG_MORE (0)
+#define XEN_NETIF_EXTRA_FLAG_MORE (1U<<_XEN_NETIF_EXTRA_FLAG_MORE)
/* GSO types */
-#define XEN_NETIF_GSO_TYPE_NONE (0)
-#define XEN_NETIF_GSO_TYPE_TCPV4 (1)
-#define XEN_NETIF_GSO_TYPE_TCPV6 (2)
+#define XEN_NETIF_GSO_TYPE_NONE (0)
+#define XEN_NETIF_GSO_TYPE_TCPV4 (1)
+#define XEN_NETIF_GSO_TYPE_TCPV6 (2)
/*
- * This structure needs to fit within both netif_tx_request and
- * netif_rx_response for compatibility.
+ * This structure needs to fit within both xen_netif_tx_request_t and
+ * xen_netif_rx_response_t for compatibility.
*/
struct xen_netif_extra_info {
- uint8_t type; /* XEN_NETIF_EXTRA_TYPE_* */
- uint8_t flags; /* XEN_NETIF_EXTRA_FLAG_* */
-
+ uint8_t type;
+ uint8_t flags;
union {
struct {
- /*
- * Maximum payload size of each segment. For
- * example, for TCP this is just the path MSS.
- */
uint16_t size;
-
- /*
- * GSO type. This determines the protocol of
- * the packet and any extra features required
- * to segment the packet properly.
- */
- uint8_t type; /* XEN_NETIF_GSO_TYPE_* */
-
- /* Future expansion. */
+ uint8_t type;
uint8_t pad;
-
- /*
- * GSO features. This specifies any extra GSO
- * features required to process this packet,
- * such as ECN support for TCPv4.
- */
- uint16_t features; /* XEN_NETIF_GSO_FEAT_* */
+ uint16_t features;
} gso;
-
struct {
- uint8_t addr[6]; /* Address to add/remove. */
+ uint8_t addr[6];
} mcast;
-
+ struct {
+ uint8_t type;
+ uint8_t algorithm;
+ uint8_t value[4];
+ } hash;
uint16_t pad[3];
} u;
};
struct xen_netif_tx_response {
uint16_t id;
- int16_t status; /* XEN_NETIF_RSP_* */
+ int16_t status;
};
struct xen_netif_rx_request {
- uint16_t id; /* Echoed in response message. */
- grant_ref_t gref; /* Reference to incoming granted frame */
+ uint16_t id; /* Echoed in response message. */
+ uint16_t pad;
+ grant_ref_t gref;
};
/* Packet data has been validated against protocol checksum. */
-#define _XEN_NETRXF_data_validated (0)
-#define XEN_NETRXF_data_validated (1U<<_XEN_NETRXF_data_validated)
+#define _XEN_NETRXF_data_validated (0)
+#define XEN_NETRXF_data_validated (1U<<_XEN_NETRXF_data_validated)
/* Protocol checksum field is blank in the packet (hardware offload)? */
-#define _XEN_NETRXF_csum_blank (1)
-#define XEN_NETRXF_csum_blank (1U<<_XEN_NETRXF_csum_blank)
+#define _XEN_NETRXF_csum_blank (1)
+#define XEN_NETRXF_csum_blank (1U<<_XEN_NETRXF_csum_blank)
/* Packet continues in the next request descriptor. */
-#define _XEN_NETRXF_more_data (2)
-#define XEN_NETRXF_more_data (1U<<_XEN_NETRXF_more_data)
+#define _XEN_NETRXF_more_data (2)
+#define XEN_NETRXF_more_data (1U<<_XEN_NETRXF_more_data)
/* Packet to be followed by extra descriptor(s). */
-#define _XEN_NETRXF_extra_info (3)
-#define XEN_NETRXF_extra_info (1U<<_XEN_NETRXF_extra_info)
+#define _XEN_NETRXF_extra_info (3)
+#define XEN_NETRXF_extra_info (1U<<_XEN_NETRXF_extra_info)
-/* GSO Prefix descriptor. */
-#define _XEN_NETRXF_gso_prefix (4)
-#define XEN_NETRXF_gso_prefix (1U<<_XEN_NETRXF_gso_prefix)
+/* Packet has GSO prefix. Deprecated but included for compatibility */
+#define _XEN_NETRXF_gso_prefix (4)
+#define XEN_NETRXF_gso_prefix (1U<<_XEN_NETRXF_gso_prefix)
struct xen_netif_rx_response {
- uint16_t id;
- uint16_t offset; /* Offset in page of start of received packet */
- uint16_t flags; /* XEN_NETRXF_* */
- int16_t status; /* -ve: BLKIF_RSP_* ; +ve: Rx'ed pkt size. */
+ uint16_t id;
+ uint16_t offset;
+ uint16_t flags;
+ int16_t status;
};
/*
- * Generate netif ring structures and types.
+ * Generate xen_netif ring structures and types.
*/
-DEFINE_RING_TYPES(xen_netif_tx,
- struct xen_netif_tx_request,
+DEFINE_RING_TYPES(xen_netif_tx, struct xen_netif_tx_request,
struct xen_netif_tx_response);
-DEFINE_RING_TYPES(xen_netif_rx,
- struct xen_netif_rx_request,
+DEFINE_RING_TYPES(xen_netif_rx, struct xen_netif_rx_request,
struct xen_netif_rx_response);
-#define XEN_NETIF_RSP_DROPPED -2
-#define XEN_NETIF_RSP_ERROR -1
-#define XEN_NETIF_RSP_OKAY 0
-/* No response: used for auxiliary requests (e.g., xen_netif_extra_info). */
-#define XEN_NETIF_RSP_NULL 1
+#define XEN_NETIF_RSP_DROPPED -2
+#define XEN_NETIF_RSP_ERROR -1
+#define XEN_NETIF_RSP_OKAY 0
+/* No response: used for auxiliary requests (e.g., xen_netif_extra_info_t). */
+#define XEN_NETIF_RSP_NULL 1
#endif
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff