-#ifdef CONFIG_X86_32
-# include "alternative_32.h"
+#ifndef _ASM_X86_ALTERNATIVE_H
+#define _ASM_X86_ALTERNATIVE_H
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <asm/asm.h>
+
+/*
+ * Alternative inline assembly for SMP.
+ *
+ * The LOCK_PREFIX macro defined here replaces the LOCK and
+ * LOCK_PREFIX macros used everywhere in the source tree.
+ *
+ * SMP alternatives use the same data structures as the other
+ * alternatives and the X86_FEATURE_UP flag to indicate the case of a
+ * UP system running a SMP kernel. The existing apply_alternatives()
+ * works fine for patching a SMP kernel for UP.
+ *
+ * The SMP alternative tables can be kept after boot and contain both
+ * UP and SMP versions of the instructions to allow switching back to
+ * SMP at runtime, when hotplugging in a new CPU, which is especially
+ * useful in virtualized environments.
+ *
+ * The very common lock prefix is handled as special case in a
+ * separate table which is a pure address list without replacement ptr
+ * and size information. That keeps the table sizes small.
+ */
+
+#ifdef CONFIG_SMP
+#define LOCK_PREFIX \
+ ".section .smp_locks,\"a\"\n" \
+ _ASM_ALIGN "\n" \
+ _ASM_PTR "661f\n" /* address */ \
+ ".previous\n" \
+ "661:\n\tlock; "
+
+#else /* ! CONFIG_SMP */
+#define LOCK_PREFIX ""
+#endif
+
+/* This must be included *after* the definition of LOCK_PREFIX */
+#include <asm/cpufeature.h>
+
+struct alt_instr {
+ u8 *instr; /* original instruction */
+ u8 *replacement;
+ u8 cpuid; /* cpuid bit set for replacement */
+ u8 instrlen; /* length of original instruction */
+ u8 replacementlen; /* length of new instruction, <= instrlen */
+ u8 pad1;
+#ifdef CONFIG_X86_64
+ u32 pad2;
+#endif
+};
+
+extern void alternative_instructions(void);
+extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
+
+struct module;
+
+#ifdef CONFIG_SMP
+extern void alternatives_smp_module_add(struct module *mod, char *name,
+ void *locks, void *locks_end,
+ void *text, void *text_end);
+extern void alternatives_smp_module_del(struct module *mod);
+extern void alternatives_smp_switch(int smp);
+#else
+static inline void alternatives_smp_module_add(struct module *mod, char *name,
+ void *locks, void *locks_end,
+ void *text, void *text_end) {}
+static inline void alternatives_smp_module_del(struct module *mod) {}
+static inline void alternatives_smp_switch(int smp) {}
+#endif /* CONFIG_SMP */
+
+/*
+ * Alternative instructions for different CPU types or capabilities.
+ *
+ * This allows to use optimized instructions even on generic binary
+ * kernels.
+ *
+ * length of oldinstr must be longer or equal the length of newinstr
+ * It can be padded with nops as needed.
+ *
+ * For non barrier like inlines please define new variants
+ * without volatile and memory clobber.
+ */
+#define alternative(oldinstr, newinstr, feature) \
+ asm volatile ("661:\n\t" oldinstr "\n662:\n" \
+ ".section .altinstructions,\"a\"\n" \
+ _ASM_ALIGN "\n" \
+ _ASM_PTR "661b\n" /* label */ \
+ _ASM_PTR "663f\n" /* new instruction */ \
+ " .byte %c0\n" /* feature bit */ \
+ " .byte 662b-661b\n" /* sourcelen */ \
+ " .byte 664f-663f\n" /* replacementlen */ \
+ ".previous\n" \
+ ".section .altinstr_replacement,\"ax\"\n" \
+ "663:\n\t" newinstr "\n664:\n" /* replacement */ \
+ ".previous" :: "i" (feature) : "memory")
+
+/*
+ * Alternative inline assembly with input.
+ *
+ * Pecularities:
+ * No memory clobber here.
+ * Argument numbers start with 1.
+ * Best is to use constraints that are fixed size (like (%1) ... "r")
+ * If you use variable sized constraints like "m" or "g" in the
+ * replacement make sure to pad to the worst case length.
+ */
+#define alternative_input(oldinstr, newinstr, feature, input...) \
+ asm volatile ("661:\n\t" oldinstr "\n662:\n" \
+ ".section .altinstructions,\"a\"\n" \
+ _ASM_ALIGN "\n" \
+ _ASM_PTR "661b\n" /* label */ \
+ _ASM_PTR "663f\n" /* new instruction */ \
+ " .byte %c0\n" /* feature bit */ \
+ " .byte 662b-661b\n" /* sourcelen */ \
+ " .byte 664f-663f\n" /* replacementlen */ \
+ ".previous\n" \
+ ".section .altinstr_replacement,\"ax\"\n" \
+ "663:\n\t" newinstr "\n664:\n" /* replacement */ \
+ ".previous" :: "i" (feature), ##input)
+
+/* Like alternative_input, but with a single output argument */
+#define alternative_io(oldinstr, newinstr, feature, output, input...) \
+ asm volatile ("661:\n\t" oldinstr "\n662:\n" \
+ ".section .altinstructions,\"a\"\n" \
+ _ASM_ALIGN "\n" \
+ _ASM_PTR "661b\n" /* label */ \
+ _ASM_PTR "663f\n" /* new instruction */ \
+ " .byte %c[feat]\n" /* feature bit */ \
+ " .byte 662b-661b\n" /* sourcelen */ \
+ " .byte 664f-663f\n" /* replacementlen */ \
+ ".previous\n" \
+ ".section .altinstr_replacement,\"ax\"\n" \
+ "663:\n\t" newinstr "\n664:\n" /* replacement */ \
+ ".previous" : output : [feat] "i" (feature), ##input)
+
+/*
+ * use this macro(s) if you need more than one output parameter
+ * in alternative_io
+ */
+#define ASM_OUTPUT2(a, b) a, b
+
+struct paravirt_patch_site;
+#ifdef CONFIG_PARAVIRT
+void apply_paravirt(struct paravirt_patch_site *start,
+ struct paravirt_patch_site *end);
#else
-# include "alternative_64.h"
+static inline void
+apply_paravirt(struct paravirt_patch_site *start,
+ struct paravirt_patch_site *end)
+{}
+#define __parainstructions NULL
+#define __parainstructions_end NULL
#endif
+
+extern void text_poke(void *addr, unsigned char *opcode, int len);
+
+#endif /* _ASM_X86_ALTERNATIVE_H */
+++ /dev/null
-#ifndef _I386_ALTERNATIVE_H
-#define _I386_ALTERNATIVE_H
-
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <asm/asm.h>
-
-/*
- * Alternative inline assembly for SMP.
- *
- * The LOCK_PREFIX macro defined here replaces the LOCK and
- * LOCK_PREFIX macros used everywhere in the source tree.
- *
- * SMP alternatives use the same data structures as the other
- * alternatives and the X86_FEATURE_UP flag to indicate the case of a
- * UP system running a SMP kernel. The existing apply_alternatives()
- * works fine for patching a SMP kernel for UP.
- *
- * The SMP alternative tables can be kept after boot and contain both
- * UP and SMP versions of the instructions to allow switching back to
- * SMP at runtime, when hotplugging in a new CPU, which is especially
- * useful in virtualized environments.
- *
- * The very common lock prefix is handled as special case in a
- * separate table which is a pure address list without replacement ptr
- * and size information. That keeps the table sizes small.
- */
-
-#ifdef CONFIG_SMP
-#define LOCK_PREFIX \
- ".section .smp_locks,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661f\n" /* address */ \
- ".previous\n" \
- "661:\n\tlock; "
-
-#else /* ! CONFIG_SMP */
-#define LOCK_PREFIX ""
-#endif
-
-/* This must be included *after* the definition of LOCK_PREFIX */
-#include <asm/cpufeature.h>
-
-struct alt_instr {
- u8 *instr; /* original instruction */
- u8 *replacement;
- u8 cpuid; /* cpuid bit set for replacement */
- u8 instrlen; /* length of original instruction */
- u8 replacementlen; /* length of new instruction, <= instrlen */
- u8 pad1;
-#ifdef CONFIG_X86_64
- u32 pad2;
-#endif
-};
-
-extern void alternative_instructions(void);
-extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
-
-struct module;
-
-#ifdef CONFIG_SMP
-extern void alternatives_smp_module_add(struct module *mod, char *name,
- void *locks, void *locks_end,
- void *text, void *text_end);
-extern void alternatives_smp_module_del(struct module *mod);
-extern void alternatives_smp_switch(int smp);
-#else
-static inline void alternatives_smp_module_add(struct module *mod, char *name,
- void *locks, void *locks_end,
- void *text, void *text_end) {}
-static inline void alternatives_smp_module_del(struct module *mod) {}
-static inline void alternatives_smp_switch(int smp) {}
-#endif /* CONFIG_SMP */
-
-/*
- * Alternative instructions for different CPU types or capabilities.
- *
- * This allows to use optimized instructions even on generic binary
- * kernels.
- *
- * length of oldinstr must be longer or equal the length of newinstr
- * It can be padded with nops as needed.
- *
- * For non barrier like inlines please define new variants
- * without volatile and memory clobber.
- */
-#define alternative(oldinstr, newinstr, feature) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c0\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" :: "i" (feature) : "memory")
-
-/*
- * Alternative inline assembly with input.
- *
- * Pecularities:
- * No memory clobber here.
- * Argument numbers start with 1.
- * Best is to use constraints that are fixed size (like (%1) ... "r")
- * If you use variable sized constraints like "m" or "g" in the
- * replacement make sure to pad to the worst case length.
- */
-#define alternative_input(oldinstr, newinstr, feature, input...) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c0\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" :: "i" (feature), ##input)
-
-/* Like alternative_input, but with a single output argument */
-#define alternative_io(oldinstr, newinstr, feature, output, input...) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c[feat]\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" : output : [feat] "i" (feature), ##input)
-
-/*
- * use this macro(s) if you need more than one output parameter
- * in alternative_io
- */
-#define ASM_OUTPUT2(a, b) a, b
-
-struct paravirt_patch_site;
-#ifdef CONFIG_PARAVIRT
-void apply_paravirt(struct paravirt_patch_site *start,
- struct paravirt_patch_site *end);
-#else
-static inline void
-apply_paravirt(struct paravirt_patch_site *start,
- struct paravirt_patch_site *end)
-{}
-#define __parainstructions NULL
-#define __parainstructions_end NULL
-#endif
-
-extern void text_poke(void *addr, unsigned char *opcode, int len);
-
-#endif /* _I386_ALTERNATIVE_H */
+++ /dev/null
-#ifndef _X86_64_ALTERNATIVE_H
-#define _X86_64_ALTERNATIVE_H
-
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <asm/asm.h>
-
-/*
- * Alternative inline assembly for SMP.
- *
- * The LOCK_PREFIX macro defined here replaces the LOCK and
- * LOCK_PREFIX macros used everywhere in the source tree.
- *
- * SMP alternatives use the same data structures as the other
- * alternatives and the X86_FEATURE_UP flag to indicate the case of a
- * UP system running a SMP kernel. The existing apply_alternatives()
- * works fine for patching a SMP kernel for UP.
- *
- * The SMP alternative tables can be kept after boot and contain both
- * UP and SMP versions of the instructions to allow switching back to
- * SMP at runtime, when hotplugging in a new CPU, which is especially
- * useful in virtualized environments.
- *
- * The very common lock prefix is handled as special case in a
- * separate table which is a pure address list without replacement ptr
- * and size information. That keeps the table sizes small.
- */
-
-#ifdef CONFIG_SMP
-#define LOCK_PREFIX \
- ".section .smp_locks,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661f\n" /* address */ \
- ".previous\n" \
- "661:\n\tlock; "
-
-#else /* ! CONFIG_SMP */
-#define LOCK_PREFIX ""
-#endif
-
-/* This must be included *after* the definition of LOCK_PREFIX */
-#include <asm/cpufeature.h>
-
-struct alt_instr {
- u8 *instr; /* original instruction */
- u8 *replacement;
- u8 cpuid; /* cpuid bit set for replacement */
- u8 instrlen; /* length of original instruction */
- u8 replacementlen; /* length of new instruction, <= instrlen */
- u8 pad1;
-#ifdef CONFIG_X86_64
- u32 pad2;
-#endif
-};
-
-extern void alternative_instructions(void);
-extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
-
-struct module;
-
-#ifdef CONFIG_SMP
-extern void alternatives_smp_module_add(struct module *mod, char *name,
- void *locks, void *locks_end,
- void *text, void *text_end);
-extern void alternatives_smp_module_del(struct module *mod);
-extern void alternatives_smp_switch(int smp);
-#else
-static inline void alternatives_smp_module_add(struct module *mod, char *name,
- void *locks, void *locks_end,
- void *text, void *text_end) {}
-static inline void alternatives_smp_module_del(struct module *mod) {}
-static inline void alternatives_smp_switch(int smp) {}
-#endif /* CONFIG_SMP */
-
-/*
- * Alternative instructions for different CPU types or capabilities.
- *
- * This allows to use optimized instructions even on generic binary
- * kernels.
- *
- * length of oldinstr must be longer or equal the length of newinstr
- * It can be padded with nops as needed.
- *
- * For non barrier like inlines please define new variants
- * without volatile and memory clobber.
- */
-#define alternative(oldinstr, newinstr, feature) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c0\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" :: "i" (feature) : "memory")
-
-/*
- * Alternative inline assembly with input.
- *
- * Pecularities:
- * No memory clobber here.
- * Argument numbers start with 1.
- * Best is to use constraints that are fixed size (like (%1) ... "r")
- * If you use variable sized constraints like "m" or "g" in the
- * replacement make sure to pad to the worst case length.
- */
-#define alternative_input(oldinstr, newinstr, feature, input...) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c0\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" :: "i" (feature), ##input)
-
-/* Like alternative_input, but with a single output argument */
-#define alternative_io(oldinstr, newinstr, feature, output, input...) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c[feat]\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" : output : [feat] "i" (feature), ##input)
-
-/*
- * use this macro(s) if you need more than one output parameter
- * in alternative_io
- */
-#define ASM_OUTPUT2(a, b) a, b
-
-struct paravirt_patch_site;
-#ifdef CONFIG_PARAVIRT
-void apply_paravirt(struct paravirt_patch_site *start,
- struct paravirt_patch_site *end);
-#else
-static inline void
-apply_paravirt(struct paravirt_patch_site *start,
- struct paravirt_patch_site *end)
-{}
-#define __parainstructions NULL
-#define __parainstructions_end NULL
-#endif
-
-extern void text_poke(void *addr, unsigned char *opcode, int len);
-
-#endif /* _X86_64_ALTERNATIVE_H */
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff