[POWERPC] qe: miscellaneous code improvements and fixes to the QE library
authorTimur Tabi <timur@freescale.com>
Wed, 3 Oct 2007 16:34:59 +0000 (11:34 -0500)
committerKumar Gala <galak@kernel.crashing.org>
Mon, 8 Oct 2007 13:38:15 +0000 (08:38 -0500)
This patch makes numerous miscellaneous code improvements to the QE library.

1. Remove struct ucc_common and merge ucc_init_guemr() into ucc_set_type()
   (every caller of ucc_init_guemr() also calls ucc_set_type()).  Modify all
   callers of ucc_set_type() accordingly.

2. Remove the unused enum ucc_pram_initial_offset.

3. Refactor qe_setbrg(), also implement work-around for errata QE_General4.

4. Several printk() calls were missing the terminating \n.

5. Add __iomem where needed, and change u16 to __be16 and u32 to __be32 where
   appropriate.

6. In ucc_slow_init() the RBASE and TBASE registers in the PRAM were programmed
   with the wrong value.

7. Add the protocol type to struct us_info and updated ucc_slow_init() to
   use it, instead of always programming QE_CR_PROTOCOL_UNSPECIFIED.

8. Rename ucc_slow_restart_x() to ucc_slow_restart_tx()

9. Add several macros in qe.h (mostly for slow UCC support, but also to
   standardize some naming convention) and remove several unused macros.

10. Update ucc_geth.c to use the new macros.

11. Add ucc_slow_info.protocol to specify which QE_CR_PROTOCOL_xxx protcol
    to use when initializing the UCC in ucc_slow_init().

12. Rename ucc_slow_pram.rfcr to rbmr and ucc_slow_pram.tfcr to tbmr, since
    these are the real names of the registers.

13. Use the setbits, clrbits, and clrsetbits where appropriate.

14. Refactor ucc_set_qe_mux_rxtx().

15. Remove all instances of 'volatile'.

16. Simplify get_cmxucr_reg();

17. Replace qe_mux.cmxucrX with qe_mux.cmxucr[].

18. Updated struct ucc_geth because struct ucc_fast is not padded any more.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12 files changed:
arch/powerpc/sysdev/qe_lib/qe.c
arch/powerpc/sysdev/qe_lib/qe_ic.c
arch/powerpc/sysdev/qe_lib/qe_io.c
arch/powerpc/sysdev/qe_lib/ucc.c
arch/powerpc/sysdev/qe_lib/ucc_fast.c
arch/powerpc/sysdev/qe_lib/ucc_slow.c
drivers/net/ucc_geth.c
drivers/net/ucc_geth.h
include/asm-powerpc/immap_qe.h
include/asm-powerpc/qe.h
include/asm-powerpc/ucc.h
include/asm-powerpc/ucc_slow.h

index 90f87408b5d591de37347a2006432b4ba8a6d012..3d57d3835b04e1fc2167893ed773fa8be4dcc83c 100644 (file)
@@ -141,7 +141,7 @@ EXPORT_SYMBOL(qe_issue_cmd);
  * 16 BRGs, which can be connected to the QE channels or output
  * as clocks. The BRGs are in two different block of internal
  * memory mapped space.
- * The baud rate clock is the system clock divided by something.
+ * The BRG clock is the QE clock divided by 2.
  * It was set up long ago during the initial boot phase and is
  * is given to us.
  * Baud rate clocks are zero-based in the driver code (as that maps
@@ -165,28 +165,38 @@ unsigned int get_brg_clk(void)
        return brg_clk;
 }
 
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
+/* Program the BRG to the given sampling rate and multiplier
+ *
+ * @brg: the BRG, 1-16
+ * @rate: the desired sampling rate
+ * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
+ * GUMR_L[TDCR].  E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
+ * then 'multiplier' should be 8.
+ *
+ * Also note that the value programmed into the BRGC register must be even.
  */
-void qe_setbrg(u32 brg, u32 rate)
+void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier)
 {
-       volatile u32 *bp;
        u32 divisor, tempval;
-       int div16 = 0;
+       u32 div16 = 0;
 
-       bp = &qe_immr->brg.brgc[brg];
+       divisor = get_brg_clk() / (rate * multiplier);
 
-       divisor = (get_brg_clk() / rate);
        if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
-               div16 = 1;
+               div16 = QE_BRGC_DIV16;
                divisor /= 16;
        }
 
-       tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
-       if (div16)
-               tempval |= QE_BRGC_DIV16;
+       /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
+          that the BRG divisor must be even if you're not using divide-by-16
+          mode. */
+       if (!div16 && (divisor & 1))
+               divisor++;
+
+       tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
+               QE_BRGC_ENABLE | div16;
 
-       out_be32(bp, tempval);
+       out_be32(&qe_immr->brg.brgc[brg - 1], tempval);
 }
 
 /* Initialize SNUMs (thread serial numbers) according to
index 55e6f394af8243e9d353cd424560e6f605e5b7a1..9a2d1edd050e2a32d9fedc5211075709170cc4a4 100644 (file)
@@ -405,8 +405,6 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags)
                set_irq_data(qe_ic->virq_high, qe_ic);
                set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high);
        }
-
-       printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs);
 }
 
 void qe_ic_set_highest_priority(unsigned int virq, int high)
index e32b45bf9ff5364df15accd01b510f0f2721f5a7..a114cb0c572fb46ab90e26ba8f572f7f6a02b608 100644 (file)
@@ -195,29 +195,22 @@ EXPORT_SYMBOL(par_io_of_config);
 #ifdef DEBUG
 static void dump_par_io(void)
 {
-       int i;
+       unsigned int i;
 
-       printk(KERN_INFO "PAR IO registars:\n");
-       printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io);
+       printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io);
        for (i = 0; i < num_par_io_ports; i++) {
-               printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n",
-                      i, (u32) & par_io[i].cpodr,
-                      in_be32(&par_io[i].cpodr));
-               printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n",
-                      i, (u32) & par_io[i].cpdata,
-                      in_be32(&par_io[i].cpdata));
-               printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n",
-                      i, (u32) & par_io[i].cpdir1,
-                      in_be32(&par_io[i].cpdir1));
-               printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n",
-                      i, (u32) & par_io[i].cpdir2,
-                      in_be32(&par_io[i].cpdir2));
-               printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n",
-                      i, (u32) & par_io[i].cppar1,
-                      in_be32(&par_io[i].cppar1));
-               printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n",
-                      i, (u32) & par_io[i].cppar2,
-                      in_be32(&par_io[i].cppar2));
+               printk(KERN_INFO "      cpodr[%u]=%08x\n", i,
+                       in_be32(&par_io[i].cpodr));
+               printk(KERN_INFO "      cpdata[%u]=%08x\n", i,
+                       in_be32(&par_io[i].cpdata));
+               printk(KERN_INFO "      cpdir1[%u]=%08x\n", i,
+                       in_be32(&par_io[i].cpdir1));
+               printk(KERN_INFO "      cpdir2[%u]=%08x\n", i,
+                       in_be32(&par_io[i].cpdir2));
+               printk(KERN_INFO "      cppar1[%u]=%08x\n", i,
+                       in_be32(&par_io[i].cppar1));
+               printk(KERN_INFO "      cppar2[%u]=%08x\n", i,
+                       in_be32(&par_io[i].cppar2));
        }
 
 }
index f970e5415ac00aaa13f1b9f551c9efa53f633e4e..0e348d9af8a67ba2bec9e36da49fc2c2bfb44e58 100644 (file)
 
 static DEFINE_SPINLOCK(ucc_lock);
 
-int ucc_set_qe_mux_mii_mng(int ucc_num)
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
 {
        unsigned long flags;
 
+       if (ucc_num > UCC_MAX_NUM - 1)
+               return -EINVAL;
+
        spin_lock_irqsave(&ucc_lock, flags);
-       out_be32(&qe_immr->qmx.cmxgcr,
-                ((in_be32(&qe_immr->qmx.cmxgcr) &
-                  ~QE_CMXGCR_MII_ENET_MNG) |
-                 (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT)));
+       clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
+               ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
        spin_unlock_irqrestore(&ucc_lock, flags);
 
        return 0;
 }
 EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
 
-int ucc_set_type(int ucc_num, struct ucc_common *regs,
-                enum ucc_speed_type speed)
-{
-       u8 guemr = 0;
-
-       /* check if the UCC number is in range. */
-       if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
-               return -EINVAL;
-
-       guemr = regs->guemr;
-       guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX);
-       switch (speed) {
-       case UCC_SPEED_TYPE_SLOW:
-               guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX);
-               break;
-       case UCC_SPEED_TYPE_FAST:
-               guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX);
-               break;
-       default:
-               return -EINVAL;
-       }
-       regs->guemr = guemr;
-
-       return 0;
-}
-
-int ucc_init_guemr(struct ucc_common *regs)
+/* Configure the UCC to either Slow or Fast.
+ *
+ * A given UCC can be figured to support either "slow" devices (e.g. UART)
+ * or "fast" devices (e.g. Ethernet).
+ *
+ * 'ucc_num' is the UCC number, from 0 - 7.
+ *
+ * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
+ * must always be set to 1.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
 {
-       u8 guemr = 0;
-
-       if (!regs)
-               return -EINVAL;
-
-       /* Set bit 3 (which is reserved in the GUEMR register) to 1 */
-       guemr = UCC_GUEMR_SET_RESERVED3;
-
-       regs->guemr = guemr;
-
-       return 0;
-}
+       u8 __iomem *guemr;
 
-static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num,
-                          u8 * shift)
-{
+       /* The GUEMR register is at the same location for both slow and fast
+          devices, so we just use uccX.slow.guemr. */
        switch (ucc_num) {
-       case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
-               *reg_num = 1;
-               *shift = 16;
+       case 0: guemr = &qe_immr->ucc1.slow.guemr;
                break;
-       case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
-               *reg_num = 1;
-               *shift = 0;
+       case 1: guemr = &qe_immr->ucc2.slow.guemr;
                break;
-       case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
-               *reg_num = 2;
-               *shift = 16;
+       case 2: guemr = &qe_immr->ucc3.slow.guemr;
                break;
-       case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
-               *reg_num = 2;
-               *shift = 0;
+       case 3: guemr = &qe_immr->ucc4.slow.guemr;
                break;
-       case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
-               *reg_num = 3;
-               *shift = 16;
+       case 4: guemr = &qe_immr->ucc5.slow.guemr;
                break;
-       case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
-               *reg_num = 3;
-               *shift = 0;
+       case 5: guemr = &qe_immr->ucc6.slow.guemr;
                break;
-       case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
-               *reg_num = 4;
-               *shift = 16;
+       case 6: guemr = &qe_immr->ucc7.slow.guemr;
                break;
-       case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
-               *reg_num = 4;
-               *shift = 0;
+       case 7: guemr = &qe_immr->ucc8.slow.guemr;
                break;
        default:
-               break;
+               return -EINVAL;
        }
+
+       clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
+               UCC_GUEMR_SET_RESERVED3 | speed);
+
+       return 0;
+}
+
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
+       unsigned int *reg_num, unsigned int *shift)
+{
+       unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
+
+       *reg_num = cmx + 1;
+       *cmxucr = &qe_immr->qmx.cmxucr[cmx];
+       *shift = 16 - 8 * (ucc_num & 2);
 }
 
-int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask)
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 {
-       volatile u32 *p_cmxucr;
-       u8 reg_num;
-       u8 shift;
+       __be32 *cmxucr;
+       unsigned int reg_num;
+       unsigned int shift;
 
        /* check if the UCC number is in range. */
-       if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+       if (ucc_num > UCC_MAX_NUM - 1)
                return -EINVAL;
 
-       get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+       get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
 
        if (set)
-               out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift));
+               setbits32(cmxucr, mask << shift);
        else
-               out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift));
+               clrbits32(cmxucr, mask << shift);
 
        return 0;
 }
 
-int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode)
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+       enum comm_dir mode)
 {
-       volatile u32 *p_cmxucr;
-       u8 reg_num;
-       u8 shift;
-       u32 clock_bits;
-       u32 clock_mask;
-       int source = -1;
+       __be32 *cmxucr;
+       unsigned int reg_num;
+       unsigned int shift;
+       u32 clock_bits = 0;
 
        /* check if the UCC number is in range. */
-       if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+       if (ucc_num > UCC_MAX_NUM - 1)
                return -EINVAL;
 
-       if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
-               printk(KERN_ERR
-                      "ucc_set_qe_mux_rxtx: bad comm mode type passed.");
+       /* The communications direction must be RX or TX */
+       if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
                return -EINVAL;
-       }
 
-       get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+       get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
 
        switch (reg_num) {
        case 1:
                switch (clock) {
-               case QE_BRG1:   source = 1; break;
-               case QE_BRG2:   source = 2; break;
-               case QE_BRG7:   source = 3; break;
-               case QE_BRG8:   source = 4; break;
-               case QE_CLK9:   source = 5; break;
-               case QE_CLK10:  source = 6; break;
-               case QE_CLK11:  source = 7; break;
-               case QE_CLK12:  source = 8; break;
-               case QE_CLK15:  source = 9; break;
-               case QE_CLK16:  source = 10; break;
-               default:        source = -1; break;
+               case QE_BRG1:   clock_bits = 1; break;
+               case QE_BRG2:   clock_bits = 2; break;
+               case QE_BRG7:   clock_bits = 3; break;
+               case QE_BRG8:   clock_bits = 4; break;
+               case QE_CLK9:   clock_bits = 5; break;
+               case QE_CLK10:  clock_bits = 6; break;
+               case QE_CLK11:  clock_bits = 7; break;
+               case QE_CLK12:  clock_bits = 8; break;
+               case QE_CLK15:  clock_bits = 9; break;
+               case QE_CLK16:  clock_bits = 10; break;
+               default: break;
                }
                break;
        case 2:
                switch (clock) {
-               case QE_BRG5:   source = 1; break;
-               case QE_BRG6:   source = 2; break;
-               case QE_BRG7:   source = 3; break;
-               case QE_BRG8:   source = 4; break;
-               case QE_CLK13:  source = 5; break;
-               case QE_CLK14:  source = 6; break;
-               case QE_CLK19:  source = 7; break;
-               case QE_CLK20:  source = 8; break;
-               case QE_CLK15:  source = 9; break;
-               case QE_CLK16:  source = 10; break;
-               default:        source = -1; break;
+               case QE_BRG5:   clock_bits = 1; break;
+               case QE_BRG6:   clock_bits = 2; break;
+               case QE_BRG7:   clock_bits = 3; break;
+               case QE_BRG8:   clock_bits = 4; break;
+               case QE_CLK13:  clock_bits = 5; break;
+               case QE_CLK14:  clock_bits = 6; break;
+               case QE_CLK19:  clock_bits = 7; break;
+               case QE_CLK20:  clock_bits = 8; break;
+               case QE_CLK15:  clock_bits = 9; break;
+               case QE_CLK16:  clock_bits = 10; break;
+               default: break;
                }
                break;
        case 3:
                switch (clock) {
-               case QE_BRG9:   source = 1; break;
-               case QE_BRG10:  source = 2; break;
-               case QE_BRG15:  source = 3; break;
-               case QE_BRG16:  source = 4; break;
-               case QE_CLK3:   source = 5; break;
-               case QE_CLK4:   source = 6; break;
-               case QE_CLK17:  source = 7; break;
-               case QE_CLK18:  source = 8; break;
-               case QE_CLK7:   source = 9; break;
-               case QE_CLK8:   source = 10; break;
-               case QE_CLK16:  source = 11; break;
-               default:        source = -1; break;
+               case QE_BRG9:   clock_bits = 1; break;
+               case QE_BRG10:  clock_bits = 2; break;
+               case QE_BRG15:  clock_bits = 3; break;
+               case QE_BRG16:  clock_bits = 4; break;
+               case QE_CLK3:   clock_bits = 5; break;
+               case QE_CLK4:   clock_bits = 6; break;
+               case QE_CLK17:  clock_bits = 7; break;
+               case QE_CLK18:  clock_bits = 8; break;
+               case QE_CLK7:   clock_bits = 9; break;
+               case QE_CLK8:   clock_bits = 10; break;
+               case QE_CLK16:  clock_bits = 11; break;
+               default: break;
                }
                break;
        case 4:
                switch (clock) {
-               case QE_BRG13:  source = 1; break;
-               case QE_BRG14:  source = 2; break;
-               case QE_BRG15:  source = 3; break;
-               case QE_BRG16:  source = 4; break;
-               case QE_CLK5:   source = 5; break;
-               case QE_CLK6:   source = 6; break;
-               case QE_CLK21:  source = 7; break;
-               case QE_CLK22:  source = 8; break;
-               case QE_CLK7:   source = 9; break;
-               case QE_CLK8:   source = 10; break;
-               case QE_CLK16:  source = 11; break;
-               default:        source = -1; break;
+               case QE_BRG13:  clock_bits = 1; break;
+               case QE_BRG14:  clock_bits = 2; break;
+               case QE_BRG15:  clock_bits = 3; break;
+               case QE_BRG16:  clock_bits = 4; break;
+               case QE_CLK5:   clock_bits = 5; break;
+               case QE_CLK6:   clock_bits = 6; break;
+               case QE_CLK21:  clock_bits = 7; break;
+               case QE_CLK22:  clock_bits = 8; break;
+               case QE_CLK7:   clock_bits = 9; break;
+               case QE_CLK8:   clock_bits = 10; break;
+               case QE_CLK16:  clock_bits = 11; break;
+               default: break;
                }
                break;
-       default:
-               source = -1;
-               break;
+       default: break;
        }
 
-       if (source == -1) {
-               printk(KERN_ERR
-                    "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC.");
+       /* Check for invalid combination of clock and UCC number */
+       if (!clock_bits)
                return -ENOENT;
-       }
 
-       clock_bits = (u32) source;
-       clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK;
-       if (mode == COMM_DIR_RX) {
-               clock_bits <<= 4;  /* Rx field is 4 bits to left of Tx field */
-               clock_mask <<= 4;  /* Rx field is 4 bits to left of Tx field */
-       }
-       clock_bits <<= shift;
-       clock_mask <<= shift;
+       if (mode == COMM_DIR_RX)
+               shift += 4;
 
-       out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits);
+       clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+               clock_bits << shift);
 
        return 0;
 }
index 3df202e8d33253a4b17744ac58daea10662d8afa..3223acbc39e55af7199cb10148914d164acc8d6a 100644 (file)
 
 void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 {
-       printk(KERN_INFO "UCC%d Fast registers:", uccf->uf_info->ucc_num);
-       printk(KERN_INFO "Base address: 0x%08x", (u32) uccf->uf_regs);
-
-       printk(KERN_INFO "gumr  : addr - 0x%08x, val - 0x%08x",
-                 (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
-       printk(KERN_INFO "upsmr : addr - 0x%08x, val - 0x%08x",
-                 (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
-       printk(KERN_INFO "utodr : addr - 0x%08x, val - 0x%04x",
-                 (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
-       printk(KERN_INFO "udsr  : addr - 0x%08x, val - 0x%04x",
-                 (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
-       printk(KERN_INFO "ucce  : addr - 0x%08x, val - 0x%08x",
-                 (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
-       printk(KERN_INFO "uccm  : addr - 0x%08x, val - 0x%08x",
-                 (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
-       printk(KERN_INFO "uccs  : addr - 0x%08x, val - 0x%02x",
-                 (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
-       printk(KERN_INFO "urfb  : addr - 0x%08x, val - 0x%08x",
-                 (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
-       printk(KERN_INFO "urfs  : addr - 0x%08x, val - 0x%04x",
-                 (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
-       printk(KERN_INFO "urfet : addr - 0x%08x, val - 0x%04x",
-                 (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
-       printk(KERN_INFO "urfset: addr - 0x%08x, val - 0x%04x",
-                 (u32) & uccf->uf_regs->urfset,
-                 in_be16(&uccf->uf_regs->urfset));
-       printk(KERN_INFO "utfb  : addr - 0x%08x, val - 0x%08x",
-                 (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
-       printk(KERN_INFO "utfs  : addr - 0x%08x, val - 0x%04x",
-                 (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
-       printk(KERN_INFO "utfet : addr - 0x%08x, val - 0x%04x",
-                 (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
-       printk(KERN_INFO "utftt : addr - 0x%08x, val - 0x%04x",
-                 (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
-       printk(KERN_INFO "utpt  : addr - 0x%08x, val - 0x%04x",
-                 (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
-       printk(KERN_INFO "urtry : addr - 0x%08x, val - 0x%08x",
-                 (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
-       printk(KERN_INFO "guemr : addr - 0x%08x, val - 0x%02x",
-                 (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+       printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
+       printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
+
+       printk(KERN_INFO "gumr  : addr=0x%p, val=0x%08x\n",
+                 &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+       printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
+                 &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+       printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
+                 &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+       printk(KERN_INFO "udsr  : addr=0x%p, val=0x%04x\n",
+                 &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+       printk(KERN_INFO "ucce  : addr=0x%p, val=0x%08x\n",
+                 &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+       printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
+                 &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+       printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
+                 &uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+       printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
+                 &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+       printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
+                 &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+       printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
+                 &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+       printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
+                 &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
+       printk(KERN_INFO "utfb  : addr=0x%p, val=0x%08x\n",
+                 &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+       printk(KERN_INFO "utfs  : addr=0x%p, val=0x%04x\n",
+                 &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+       printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
+                 &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+       printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
+                 &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+       printk(KERN_INFO "utpt  : addr=0x%p, val=0x%04x\n",
+                 &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+       printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
+                 &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+       printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
+                 &uccf->uf_regs->guemr, uccf->uf_regs->guemr);
 }
 EXPORT_SYMBOL(ucc_fast_dump_regs);
 
@@ -149,55 +148,57 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 
        /* check if the UCC port number is in range. */
        if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
-               printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
+               printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
                return -EINVAL;
        }
 
        /* Check that 'max_rx_buf_length' is properly aligned (4). */
        if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
-               printk(KERN_ERR "%s: max_rx_buf_length not aligned", __FUNCTION__);
+               printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
+                       __FUNCTION__);
                return -EINVAL;
        }
 
        /* Validate Virtual Fifo register values */
        if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
-               printk(KERN_ERR "%s: urfs is too small", __FUNCTION__);
+               printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__);
                return -EINVAL;
        }
 
        if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-               printk(KERN_ERR "%s: urfs is not aligned", __FUNCTION__);
+               printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__);
                return -EINVAL;
        }
 
        if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-               printk(KERN_ERR "%s: urfet is not aligned.", __FUNCTION__);
+               printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__);
                return -EINVAL;
        }
 
        if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-               printk(KERN_ERR "%s: urfset is not aligned", __FUNCTION__);
+               printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__);
                return -EINVAL;
        }
 
        if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-               printk(KERN_ERR "%s: utfs is not aligned", __FUNCTION__);
+               printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__);
                return -EINVAL;
        }
 
        if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-               printk(KERN_ERR "%s: utfet is not aligned", __FUNCTION__);
+               printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__);
                return -EINVAL;
        }
 
        if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-               printk(KERN_ERR "%s: utftt is not aligned", __FUNCTION__);
+               printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__);
                return -EINVAL;
        }
 
        uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
        if (!uccf) {
-               printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
+               printk(KERN_ERR "%s: Cannot allocate private data\n",
+                       __FUNCTION__);
                return -ENOMEM;
        }
 
@@ -206,7 +207,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
        /* Set the PHY base address */
        uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
        if (uccf->uf_regs == NULL) {
-               printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
+               printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
                return -ENOMEM;
        }
 
@@ -226,18 +227,10 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
        uccf->rx_discarded = 0;
 #endif                         /* STATISTICS */
 
-       /* Init Guemr register */
-       if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) {
-               printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
-               ucc_fast_free(uccf);
-               return ret;
-       }
-
        /* Set UCC to fast type */
-       if ((ret = ucc_set_type(uf_info->ucc_num,
-                               (struct ucc_common *) (uf_regs),
-                               UCC_SPEED_TYPE_FAST))) {
-               printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
+       ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
+       if (ret) {
+               printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__);
                ucc_fast_free(uccf);
                return ret;
        }
@@ -276,7 +269,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
        uccf->ucc_fast_tx_virtual_fifo_base_offset =
            qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
        if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
-               printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__);
+               printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
+                       __FUNCTION__);
                uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
                ucc_fast_free(uccf);
                return -ENOMEM;
@@ -288,7 +282,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
                           UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
                           UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
        if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
-               printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__);
+               printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
+                       __FUNCTION__);
                uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
                ucc_fast_free(uccf);
                return -ENOMEM;
@@ -318,7 +313,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
                if ((uf_info->rx_clock != QE_CLK_NONE) &&
                    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
                                        COMM_DIR_RX)) {
-                       printk(KERN_ERR "%s: illegal value for RX clock",
+                       printk(KERN_ERR "%s: illegal value for RX clock\n",
                               __FUNCTION__);
                        ucc_fast_free(uccf);
                        return -EINVAL;
@@ -327,7 +322,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
                if ((uf_info->tx_clock != QE_CLK_NONE) &&
                    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
                                        COMM_DIR_TX)) {
-                       printk(KERN_ERR "%s: illegal value for TX clock",
+                       printk(KERN_ERR "%s: illegal value for TX clock\n",
                               __FUNCTION__);
                        ucc_fast_free(uccf);
                        return -EINVAL;
index 1f65c26ce63f8fff07ecd4ff040f0d8eadb8c0e9..0174b3aeef8f36618f48ea22bbd346db1d250b0c 100644 (file)
@@ -115,11 +115,15 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
        out_be32(&us_regs->gumr_l, gumr_l);
 }
 
+/* Initialize the UCC for Slow operations
+ *
+ * The caller should initialize the following us_info
+ */
 int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
 {
        struct ucc_slow_private *uccs;
        u32 i;
-       struct ucc_slow *us_regs;
+       struct ucc_slow __iomem *us_regs;
        u32 gumr;
        struct qe_bd *bd;
        u32 id;
@@ -131,7 +135,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 
        /* check if the UCC port number is in range. */
        if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
-               printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
+               printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
                return -EINVAL;
        }
 
@@ -143,13 +147,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
         */
        if ((!us_info->rfw) &&
                (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
-               printk(KERN_ERR "max_rx_buf_length not aligned.");
+               printk(KERN_ERR "max_rx_buf_length not aligned.\n");
                return -EINVAL;
        }
 
        uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
        if (!uccs) {
-               printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
+               printk(KERN_ERR "%s: Cannot allocate private data\n",
+                       __FUNCTION__);
                return -ENOMEM;
        }
 
@@ -158,7 +163,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
        /* Set the PHY base address */
        uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
        if (uccs->us_regs == NULL) {
-               printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
+               printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
                return -ENOMEM;
        }
 
@@ -182,22 +187,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
                return -ENOMEM;
        }
        id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-       qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
+       qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
                     uccs->us_pram_offset);
 
        uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
 
-       /* Init Guemr register */
-       if ((ret = ucc_init_guemr((struct ucc_common *) us_regs))) {
-               printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
-               ucc_slow_free(uccs);
-               return ret;
-       }
-
        /* Set UCC to slow type */
-       if ((ret = ucc_set_type(us_info->ucc_num,
-                               (struct ucc_common *) us_regs,
-                               UCC_SPEED_TYPE_SLOW))) {
+       ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
+       if (ret) {
                printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
                ucc_slow_free(uccs);
                return ret;
@@ -212,7 +209,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
                qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
                                QE_ALIGNMENT_OF_BD);
        if (IS_ERR_VALUE(uccs->rx_base_offset)) {
-               printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__);
+               printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__,
+                       us_info->rx_bd_ring_len);
                uccs->rx_base_offset = 0;
                ucc_slow_free(uccs);
                return -ENOMEM;
@@ -292,12 +290,12 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 
        /* if the data is in cachable memory, the 'global' */
        /* in the function code should be set. */
-       uccs->us_pram->tfcr = uccs->us_pram->rfcr =
-               us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT;
+       uccs->us_pram->tbmr = UCC_BMR_BO_BE;
+       uccs->us_pram->rbmr = UCC_BMR_BO_BE;
 
        /* rbase, tbase are offsets from MURAM base */
-       out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
-       out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);
+       out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset);
+       out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset);
 
        /* Mux clocking */
        /* Grant Support */
@@ -311,7 +309,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
                /* Rx clock routing */
                if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
                                        COMM_DIR_RX)) {
-                       printk(KERN_ERR "%s: illegal value for RX clock",
+                       printk(KERN_ERR "%s: illegal value for RX clock\n",
                               __FUNCTION__);
                        ucc_slow_free(uccs);
                        return -EINVAL;
@@ -319,7 +317,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
                /* Tx clock routing */
                if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
                                        COMM_DIR_TX)) {
-                       printk(KERN_ERR "%s: illegal value for TX clock",
+                       printk(KERN_ERR "%s: illegal value for TX clock\n",
                               __FUNCTION__);
                        ucc_slow_free(uccs);
                        return -EINVAL;
@@ -343,8 +341,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
                command = QE_INIT_TX;
        else
                command = QE_INIT_RX;   /* We know at least one is TRUE */
-       id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-       qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+       qe_issue_cmd(command, id, us_info->protocol, 0);
 
        *uccs_ret = uccs;
        return 0;
index 9a38dfe45f8f2c9cc316a59901a6627e6275b0e9..7dedc9609603848c0908d18c1b3bf739fc71f59c 100644 (file)
@@ -2919,7 +2919,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
        test = in_be16(&ugeth->p_tx_glbl_pram->temoder);
 
        /* Function code register value to be used later */
-       function_code = QE_BMR_BYTE_ORDER_BO_MOT | UCC_FAST_FUNCTION_CODE_GBL;
+       function_code = UCC_BMR_BO_BE | UCC_BMR_GBL;
        /* Required for QE */
 
        /* function code register */
index bb4dac8c0c654003e4e778ad2fffa0503a884983..1aa69023cde1fdebd0e92cdece142d35d66cf22f 100644 (file)
@@ -44,6 +44,7 @@
 
 struct ucc_geth {
        struct ucc_fast uccf;
+       u8 res0[0x100 - sizeof(struct ucc_fast)];
 
        u32 maccfg1;            /* mac configuration reg. 1 */
        u32 maccfg2;            /* mac configuration reg. 2 */
index 02548f74ccb79ca1fd46d7a8e15dec9be0be03e1..aba9806b31c9f7faa879cb4547821b48bf15289f 100644 (file)
@@ -97,10 +97,7 @@ struct qe_mux {
        __be32  cmxsi1cr_l;     /* CMX SI1 clock route low register */
        __be32  cmxsi1cr_h;     /* CMX SI1 clock route high register */
        __be32  cmxsi1syr;      /* CMX SI1 SYNC route register */
-       __be32  cmxucr1;        /* CMX UCC1, UCC3 clock route register */
-       __be32  cmxucr2;        /* CMX UCC5, UCC7 clock route register */
-       __be32  cmxucr3;        /* CMX UCC2, UCC4 clock route register */
-       __be32  cmxucr4;        /* CMX UCC6, UCC8 clock route register */
+       __be32  cmxucr[4];      /* CMX UCCx clock route registers */
        __be32  cmxupcr;        /* CMX UPC clock route register */
        u8      res0[0x1C];
 } __attribute__ ((packed));
@@ -261,7 +258,6 @@ struct ucc_slow {
        __be16  utpt;
        u8      res4[0x52];
        u8      guemr;          /* UCC general extended mode register */
-       u8      res5[0x200 - 0x091];
 } __attribute__ ((packed));
 
 /* QE UCC Fast */
@@ -294,21 +290,13 @@ struct ucc_fast {
        __be32  urtry;          /* UCC retry counter register */
        u8      res8[0x4C];
        u8      guemr;          /* UCC general extended mode register */
-       u8      res9[0x100 - 0x091];
-} __attribute__ ((packed));
-
-/* QE UCC */
-struct ucc_common {
-       u8      res1[0x90];
-       u8      guemr;
-       u8      res2[0x200 - 0x091];
 } __attribute__ ((packed));
 
 struct ucc {
        union {
                struct  ucc_slow slow;
                struct  ucc_fast fast;
-               struct  ucc_common common;
+               u8      res[0x200];     /* UCC blocks are 512 bytes each */
        };
 } __attribute__ ((packed));
 
@@ -407,7 +395,7 @@ struct dbg {
 
 /* RISC Special Registers (Trap and Breakpoint) */
 struct rsp {
-       u8      fixme[0x100];
+       u32     reg[0x40];      /* 64 32-bit registers */
 } __attribute__ ((packed));
 
 struct qe_immap {
@@ -436,11 +424,13 @@ struct qe_immap {
        u8                      res13[0x600];
        struct upc              upc2;           /* MultiPHY UTOPIA POS Ctrlr 2*/
        struct sdma             sdma;           /* SDMA */
-       struct dbg              dbg;            /* Debug Space */
-       struct rsp              rsp[0x2];       /* RISC Special Registers
+       struct dbg              dbg;            /* 0x104080 - 0x1040FF
+                                                  Debug Space */
+       struct rsp              rsp[0x2];       /* 0x104100 - 0x1042FF
+                                                  RISC Special Registers
                                                   (Trap and Breakpoint) */
-       u8                      res14[0x300];
-       u8                      res15[0x3A00];
+       u8                      res14[0x300];   /* 0x104300 - 0x1045FF */
+       u8                      res15[0x3A00];  /* 0x104600 - 0x107FFF */
        u8                      res16[0x8000];  /* 0x108000 - 0x110000 */
        u8                      muram[0xC000];  /* 0x110000 - 0x11C000
                                                   Multi-user RAM */
@@ -451,7 +441,7 @@ struct qe_immap {
 extern struct qe_immap *qe_immr;
 extern phys_addr_t get_qe_base(void);
 
-static inline unsigned long immrbar_virt_to_phys(volatile void * address)
+static inline unsigned long immrbar_virt_to_phys(void *address)
 {
        if ( ((u32)address >= (u32)qe_immr) &&
                        ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
index ad23c580631cfc929ee2499db1a4f861cff20d3a..0dabe46a29d20ac7e1e9a9a85001261eb34220b5 100644 (file)
@@ -38,7 +38,7 @@ extern int par_io_data_set(u8 port, u8 pin, u8 val);
 
 /* QE internal API */
 int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
-void qe_setbrg(u32 brg, u32 rate);
+void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier);
 int qe_get_snum(void);
 void qe_put_snum(u8 snum);
 unsigned long qe_muram_alloc(int size, int align);
@@ -49,14 +49,28 @@ void *qe_muram_addr(unsigned long offset);
 
 /* Buffer descriptors */
 struct qe_bd {
-       u16 status;
-       u16 length;
-       u32 buf;
+       __be16 status;
+       __be16 length;
+       __be32 buf;
 } __attribute__ ((packed));
 
 #define BD_STATUS_MASK 0xffff0000
 #define BD_LENGTH_MASK 0x0000ffff
 
+#define BD_SC_EMPTY    0x8000  /* Receive is empty */
+#define BD_SC_READY    0x8000  /* Transmit is ready */
+#define BD_SC_WRAP     0x2000  /* Last buffer descriptor */
+#define BD_SC_INTRPT   0x1000  /* Interrupt on change */
+#define BD_SC_LAST     0x0800  /* Last buffer in frame */
+#define BD_SC_CM       0x0200  /* Continous mode */
+#define BD_SC_ID       0x0100  /* Rec'd too many idles */
+#define BD_SC_P                0x0100  /* xmt preamble */
+#define BD_SC_BR       0x0020  /* Break received */
+#define BD_SC_FR       0x0010  /* Framing error */
+#define BD_SC_PR       0x0008  /* Parity error */
+#define BD_SC_OV       0x0002  /* Overrun */
+#define BD_SC_CD       0x0001  /* ?? */
+
 /* Alignment */
 #define QE_INTR_TABLE_ALIGN    16      /* ??? */
 #define QE_ALIGNMENT_OF_BD     8
@@ -269,15 +283,12 @@ enum qe_clock {
 /* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
 #define QE_CR_PROTOCOL_UNSPECIFIED     0x00    /* For all other protocols */
 #define QE_CR_PROTOCOL_HDLC_TRANSPARENT        0x00
+#define QE_CR_PROTOCOL_QMC             0x02
+#define QE_CR_PROTOCOL_UART            0x04
 #define QE_CR_PROTOCOL_ATM_POS         0x0A
 #define QE_CR_PROTOCOL_ETHERNET                0x0C
 #define QE_CR_PROTOCOL_L2_SWITCH       0x0D
 
-/* BMR byte order */
-#define QE_BMR_BYTE_ORDER_BO_PPC       0x08    /* powerpc little endian */
-#define QE_BMR_BYTE_ORDER_BO_MOT       0x10    /* motorola big endian */
-#define QE_BMR_BYTE_ORDER_BO_MAX       0x18
-
 /* BRG configuration register */
 #define QE_BRGC_ENABLE         0x00010000
 #define QE_BRGC_DIVISOR_SHIFT  1
@@ -324,41 +335,41 @@ enum qe_clock {
 #define UPGCR_ADDR     0x10000000      /* Master MPHY Addr multiplexing */
 #define UPGCR_DIAG     0x01000000      /* Diagnostic mode */
 
-/* UCC */
+/* UCC GUEMR register */
 #define UCC_GUEMR_MODE_MASK_RX 0x02
-#define UCC_GUEMR_MODE_MASK_TX 0x01
 #define UCC_GUEMR_MODE_FAST_RX 0x02
-#define UCC_GUEMR_MODE_FAST_TX 0x01
 #define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_TX 0x01
 #define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
 #define UCC_GUEMR_SET_RESERVED3        0x10    /* Bit 3 in the guemr is reserved but
                                           must be set 1 */
 
 /* structure representing UCC SLOW parameter RAM */
 struct ucc_slow_pram {
-       u16 rbase;              /* RX BD base address */
-       u16 tbase;              /* TX BD base address */
-       u8 rfcr;                /* Rx function code */
-       u8 tfcr;                /* Tx function code */
-       u16 mrblr;              /* Rx buffer length */
-       u32 rstate;             /* Rx internal state */
-       u32 rptr;               /* Rx internal data pointer */
-       u16 rbptr;              /* rb BD Pointer */
-       u16 rcount;             /* Rx internal byte count */
-       u32 rtemp;              /* Rx temp */
-       u32 tstate;             /* Tx internal state */
-       u32 tptr;               /* Tx internal data pointer */
-       u16 tbptr;              /* Tx BD pointer */
-       u16 tcount;             /* Tx byte count */
-       u32 ttemp;              /* Tx temp */
-       u32 rcrc;               /* temp receive CRC */
-       u32 tcrc;               /* temp transmit CRC */
+       __be16 rbase;           /* RX BD base address */
+       __be16 tbase;           /* TX BD base address */
+       u8 rbmr;                /* RX bus mode register (same as CPM's RFCR) */
+       u8 tbmr;                /* TX bus mode register (same as CPM's TFCR) */
+       __be16 mrblr;           /* Rx buffer length */
+       __be32 rstate;          /* Rx internal state */
+       __be32 rptr;            /* Rx internal data pointer */
+       __be16 rbptr;           /* rb BD Pointer */
+       __be16 rcount;          /* Rx internal byte count */
+       __be32 rtemp;           /* Rx temp */
+       __be32 tstate;          /* Tx internal state */
+       __be32 tptr;            /* Tx internal data pointer */
+       __be16 tbptr;           /* Tx BD pointer */
+       __be16 tcount;          /* Tx byte count */
+       __be32 ttemp;           /* Tx temp */
+       __be32 rcrc;            /* temp receive CRC */
+       __be32 tcrc;            /* temp transmit CRC */
 } __attribute__ ((packed));
 
 /* General UCC SLOW Mode Register (GUMRH & GUMRL) */
-#define UCC_SLOW_GUMR_H_CRC16          0x00004000
-#define UCC_SLOW_GUMR_H_CRC16CCITT     0x00000000
-#define UCC_SLOW_GUMR_H_CRC32CCITT     0x00008000
+#define UCC_SLOW_GUMR_H_SAM_QMC                0x00000000
+#define UCC_SLOW_GUMR_H_SAM_SATM       0x00008000
 #define UCC_SLOW_GUMR_H_REVD           0x00002000
 #define UCC_SLOW_GUMR_H_TRX            0x00001000
 #define UCC_SLOW_GUMR_H_TTX            0x00000800
@@ -378,9 +389,33 @@ struct ucc_slow_pram {
 #define UCC_SLOW_GUMR_L_TCI            0x10000000
 #define UCC_SLOW_GUMR_L_RINV           0x02000000
 #define UCC_SLOW_GUMR_L_TINV           0x01000000
-#define UCC_SLOW_GUMR_L_TEND           0x00020000
+#define UCC_SLOW_GUMR_L_TEND           0x00040000
+#define UCC_SLOW_GUMR_L_TDCR_MASK      0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_32                0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_16                0x00020000
+#define UCC_SLOW_GUMR_L_TDCR_8         0x00010000
+#define UCC_SLOW_GUMR_L_TDCR_1         0x00000000
+#define UCC_SLOW_GUMR_L_RDCR_MASK      0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_32                0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_16                0x00008000
+#define UCC_SLOW_GUMR_L_RDCR_8         0x00004000
+#define UCC_SLOW_GUMR_L_RDCR_1         0x00000000
+#define UCC_SLOW_GUMR_L_RENC_NRZI      0x00000800
+#define UCC_SLOW_GUMR_L_RENC_NRZ       0x00000000
+#define UCC_SLOW_GUMR_L_TENC_NRZI      0x00000100
+#define UCC_SLOW_GUMR_L_TENC_NRZ       0x00000000
+#define UCC_SLOW_GUMR_L_DIAG_MASK      0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_LE                0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_ECHO      0x00000080
+#define UCC_SLOW_GUMR_L_DIAG_LOOP      0x00000040
+#define UCC_SLOW_GUMR_L_DIAG_NORM      0x00000000
 #define UCC_SLOW_GUMR_L_ENR            0x00000020
 #define UCC_SLOW_GUMR_L_ENT            0x00000010
+#define UCC_SLOW_GUMR_L_MODE_MASK      0x0000000F
+#define UCC_SLOW_GUMR_L_MODE_BISYNC    0x00000008
+#define UCC_SLOW_GUMR_L_MODE_AHDLC     0x00000006
+#define UCC_SLOW_GUMR_L_MODE_UART      0x00000004
+#define UCC_SLOW_GUMR_L_MODE_QMC       0x00000002
 
 /* General UCC FAST Mode Register */
 #define UCC_FAST_GUMR_TCI      0x20000000
@@ -397,53 +432,111 @@ struct ucc_slow_pram {
 #define UCC_FAST_GUMR_ENR      0x00000020
 #define UCC_FAST_GUMR_ENT      0x00000010
 
-/* Slow UCC Event Register (UCCE) */
-#define UCC_SLOW_UCCE_GLR      0x1000
-#define UCC_SLOW_UCCE_GLT      0x0800
-#define UCC_SLOW_UCCE_DCC      0x0400
-#define UCC_SLOW_UCCE_FLG      0x0200
-#define UCC_SLOW_UCCE_AB       0x0200
-#define UCC_SLOW_UCCE_IDLE     0x0100
-#define UCC_SLOW_UCCE_GRA      0x0080
-#define UCC_SLOW_UCCE_TXE      0x0010
-#define UCC_SLOW_UCCE_RXF      0x0008
-#define UCC_SLOW_UCCE_CCR      0x0008
-#define UCC_SLOW_UCCE_RCH      0x0008
-#define UCC_SLOW_UCCE_BSY      0x0004
-#define UCC_SLOW_UCCE_TXB      0x0002
-#define UCC_SLOW_UCCE_TX       0x0002
-#define UCC_SLOW_UCCE_RX       0x0001
-#define UCC_SLOW_UCCE_GOV      0x0001
-#define UCC_SLOW_UCCE_GUN      0x0002
-#define UCC_SLOW_UCCE_GINT     0x0004
-#define UCC_SLOW_UCCE_IQOV     0x0008
-
-#define UCC_SLOW_UCCE_HDLC_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-               UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF | \
-               UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_ENET_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-               UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF)
-#define UCC_SLOW_UCCE_TRANS_SET        (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-               UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
-               UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_UART_SET (UCC_SLOW_UCCE_BSY | UCC_SLOW_UCCE_GRA | \
-               UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
-               UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_QMC_SET  (UCC_SLOW_UCCE_IQOV | UCC_SLOW_UCCE_GINT | \
-               UCC_SLOW_UCCE_GUN | UCC_SLOW_UCCE_GOV)
-
-#define UCC_SLOW_UCCE_OTHER    (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-               UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | \
-               UCC_SLOW_UCCE_GLR)
-
-#define UCC_SLOW_INTR_TX       UCC_SLOW_UCCE_TXB
-#define UCC_SLOW_INTR_RX       (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
-#define UCC_SLOW_INTR          (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
+/* UART Slow UCC Event Register (UCCE) */
+#define UCC_UART_UCCE_AB       0x0200
+#define UCC_UART_UCCE_IDLE     0x0100
+#define UCC_UART_UCCE_GRA      0x0080
+#define UCC_UART_UCCE_BRKE     0x0040
+#define UCC_UART_UCCE_BRKS     0x0020
+#define UCC_UART_UCCE_CCR      0x0008
+#define UCC_UART_UCCE_BSY      0x0004
+#define UCC_UART_UCCE_TX       0x0002
+#define UCC_UART_UCCE_RX       0x0001
+
+/* HDLC Slow UCC Event Register (UCCE) */
+#define UCC_HDLC_UCCE_GLR      0x1000
+#define UCC_HDLC_UCCE_GLT      0x0800
+#define UCC_HDLC_UCCE_IDLE     0x0100
+#define UCC_HDLC_UCCE_BRKE     0x0040
+#define UCC_HDLC_UCCE_BRKS     0x0020
+#define UCC_HDLC_UCCE_TXE      0x0010
+#define UCC_HDLC_UCCE_RXF      0x0008
+#define UCC_HDLC_UCCE_BSY      0x0004
+#define UCC_HDLC_UCCE_TXB      0x0002
+#define UCC_HDLC_UCCE_RXB      0x0001
+
+/* BISYNC Slow UCC Event Register (UCCE) */
+#define UCC_BISYNC_UCCE_GRA    0x0080
+#define UCC_BISYNC_UCCE_TXE    0x0010
+#define UCC_BISYNC_UCCE_RCH    0x0008
+#define UCC_BISYNC_UCCE_BSY    0x0004
+#define UCC_BISYNC_UCCE_TXB    0x0002
+#define UCC_BISYNC_UCCE_RXB    0x0001
+
+/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
+#define UCC_GETH_UCCE_MPD       0x80000000
+#define UCC_GETH_UCCE_SCAR      0x40000000
+#define UCC_GETH_UCCE_GRA       0x20000000
+#define UCC_GETH_UCCE_CBPR      0x10000000
+#define UCC_GETH_UCCE_BSY       0x08000000
+#define UCC_GETH_UCCE_RXC       0x04000000
+#define UCC_GETH_UCCE_TXC       0x02000000
+#define UCC_GETH_UCCE_TXE       0x01000000
+#define UCC_GETH_UCCE_TXB7      0x00800000
+#define UCC_GETH_UCCE_TXB6      0x00400000
+#define UCC_GETH_UCCE_TXB5      0x00200000
+#define UCC_GETH_UCCE_TXB4      0x00100000
+#define UCC_GETH_UCCE_TXB3      0x00080000
+#define UCC_GETH_UCCE_TXB2      0x00040000
+#define UCC_GETH_UCCE_TXB1      0x00020000
+#define UCC_GETH_UCCE_TXB0      0x00010000
+#define UCC_GETH_UCCE_RXB7      0x00008000
+#define UCC_GETH_UCCE_RXB6      0x00004000
+#define UCC_GETH_UCCE_RXB5      0x00002000
+#define UCC_GETH_UCCE_RXB4      0x00001000
+#define UCC_GETH_UCCE_RXB3      0x00000800
+#define UCC_GETH_UCCE_RXB2      0x00000400
+#define UCC_GETH_UCCE_RXB1      0x00000200
+#define UCC_GETH_UCCE_RXB0      0x00000100
+#define UCC_GETH_UCCE_RXF7      0x00000080
+#define UCC_GETH_UCCE_RXF6      0x00000040
+#define UCC_GETH_UCCE_RXF5      0x00000020
+#define UCC_GETH_UCCE_RXF4      0x00000010
+#define UCC_GETH_UCCE_RXF3      0x00000008
+#define UCC_GETH_UCCE_RXF2      0x00000004
+#define UCC_GETH_UCCE_RXF1      0x00000002
+#define UCC_GETH_UCCE_RXF0      0x00000001
+
+/* UPSMR, when used as a UART */
+#define UCC_UART_UPSMR_FLC             0x8000
+#define UCC_UART_UPSMR_SL              0x4000
+#define UCC_UART_UPSMR_CL_MASK         0x3000
+#define UCC_UART_UPSMR_CL_8            0x3000
+#define UCC_UART_UPSMR_CL_7            0x2000
+#define UCC_UART_UPSMR_CL_6            0x1000
+#define UCC_UART_UPSMR_CL_5            0x0000
+#define UCC_UART_UPSMR_UM_MASK         0x0c00
+#define UCC_UART_UPSMR_UM_NORMAL       0x0000
+#define UCC_UART_UPSMR_UM_MAN_MULTI    0x0400
+#define UCC_UART_UPSMR_UM_AUTO_MULTI   0x0c00
+#define UCC_UART_UPSMR_FRZ             0x0200
+#define UCC_UART_UPSMR_RZS             0x0100
+#define UCC_UART_UPSMR_SYN             0x0080
+#define UCC_UART_UPSMR_DRT             0x0040
+#define UCC_UART_UPSMR_PEN             0x0010
+#define UCC_UART_UPSMR_RPM_MASK                0x000c
+#define UCC_UART_UPSMR_RPM_ODD         0x0000
+#define UCC_UART_UPSMR_RPM_LOW         0x0004
+#define UCC_UART_UPSMR_RPM_EVEN                0x0008
+#define UCC_UART_UPSMR_RPM_HIGH                0x000C
+#define UCC_UART_UPSMR_TPM_MASK                0x0003
+#define UCC_UART_UPSMR_TPM_ODD         0x0000
+#define UCC_UART_UPSMR_TPM_LOW         0x0001
+#define UCC_UART_UPSMR_TPM_EVEN                0x0002
+#define UCC_UART_UPSMR_TPM_HIGH                0x0003
 
 /* UCC Transmit On Demand Register (UTODR) */
 #define UCC_SLOW_TOD   0x8000
 #define UCC_FAST_TOD   0x8000
 
+/* UCC Bus Mode Register masks */
+/* Not to be confused with the Bundle Mode Register */
+#define UCC_BMR_GBL            0x20
+#define UCC_BMR_BO_BE          0x10
+#define UCC_BMR_CETM           0x04
+#define UCC_BMR_DTB            0x02
+#define UCC_BMR_BDB            0x01
+
 /* Function code masks */
 #define FC_GBL                         0x20
 #define FC_DTB_LCL                     0x02
index afe3076bdc03d862465dcf181772c6672f704c50..46b09ba6bead6fa8b230436f6dc4508348189eff 100644 (file)
 /* Slow or fast type for UCCs.
 */
 enum ucc_speed_type {
-       UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW
-};
-
-/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR).
-*/
-enum ucc_pram_initial_offset {
-       UCC_PRAM_OFFSET_UCC1 = 0x8400,
-       UCC_PRAM_OFFSET_UCC2 = 0x8500,
-       UCC_PRAM_OFFSET_UCC3 = 0x8600,
-       UCC_PRAM_OFFSET_UCC4 = 0x9000,
-       UCC_PRAM_OFFSET_UCC5 = 0x8000,
-       UCC_PRAM_OFFSET_UCC6 = 0x8100,
-       UCC_PRAM_OFFSET_UCC7 = 0x8200,
-       UCC_PRAM_OFFSET_UCC8 = 0x8300
+       UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
+       UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
 };
 
 /* ucc_set_type
  * Sets UCC to slow or fast mode.
  *
  * ucc_num - (In) number of UCC (0-7).
- * regs    - (In) pointer to registers base for the UCC.
  * speed   - (In) slow or fast mode for UCC.
  */
-int ucc_set_type(int ucc_num, struct ucc_common *regs,
-                enum ucc_speed_type speed);
-
-/* ucc_init_guemr
- * Init the Guemr register.
- *
- * regs - (In) pointer to registers base for the UCC.
- */
-int ucc_init_guemr(struct ucc_common *regs);
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
 
-int ucc_set_qe_mux_mii_mng(int ucc_num);
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
 
-int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode);
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+       enum comm_dir mode);
 
-int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask);
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
 
 /* QE MUX clock routing for UCC
 */
-static inline int ucc_set_qe_mux_grant(int ucc_num, int set)
+static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
 {
        return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
 }
 
-static inline int ucc_set_qe_mux_tsa(int ucc_num, int set)
+static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
 {
        return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
 }
 
-static inline int ucc_set_qe_mux_bkpt(int ucc_num, int set)
+static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
 {
        return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
 }
index fdaac9d762bb5d5e101365be102f7e23ac7e032d..0980e6ad335b7fb2aa14ccc3dcbfd525025d56a5 100644 (file)
@@ -148,9 +148,10 @@ enum ucc_slow_diag_mode {
 
 struct ucc_slow_info {
        int ucc_num;
+       int protocol;                   /* QE_CR_PROTOCOL_xxx */
        enum qe_clock rx_clock;
        enum qe_clock tx_clock;
-       u32 regs;
+       phys_addr_t regs;
        int irq;
        u16 uccm_mask;
        int data_mem_part;
@@ -186,7 +187,7 @@ struct ucc_slow_info {
 
 struct ucc_slow_private {
        struct ucc_slow_info *us_info;
-       struct ucc_slow *us_regs;       /* a pointer to memory map of UCC regs */
+       struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
        struct ucc_slow_pram *us_pram;  /* a pointer to the parameter RAM */
        u32 us_pram_offset;
        int enabled_tx;         /* Whether channel is enabled for Tx (ENT) */
@@ -277,12 +278,12 @@ void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
  */
 void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
 
-/* ucc_slow_restart_x
+/* ucc_slow_restart_tx
  * Restarts transmitting on a specified slow UCC.
  *
  * uccs - (In) pointer to the slow UCC structure.
  */
-void ucc_slow_restart_x(struct ucc_slow_private * uccs);
+void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
 
 u32 ucc_slow_get_qe_cr_subblock(int uccs_num);