[PATCH] usbcore: recovery from Set-Configuration failure

This patch (as703) improves the error handling when a Set-Configuration
request fails.  The old interfaces are all unregistered before the
request is sent, and if the request fails then we don't know what config
the device is using.  So it makes no sense to leave actconfig pointing
to the old configuration with its invalid interfaces.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b2f608b0538df568d2f878f656d766ecba33ce73..8569600f313071dbda5fb278c2cd06d77d3c7862 100644 (file)
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1411,15 +1411,7 @@ free_interfaces:
                                return ret;
                        }
                }
-       }
 
-       /* if it's already configured, clear out old state first.
-        * getting rid of old interfaces means unbinding their drivers.
-        */
-       if (dev->state != USB_STATE_ADDRESS)
-               usb_disable_device (dev, 1);    // Skip ep0
-
-       if (cp) {
                i = dev->bus_mA - cp->desc.bMaxPower * 2;
                if (i < 0)
                        dev_warn(&dev->dev, "new config #%d exceeds power "
@@ -1427,84 +1419,91 @@ free_interfaces:
                                        configuration, -i);
        }
 
+       /* if it's already configured, clear out old state first.
+        * getting rid of old interfaces means unbinding their drivers.
+        */
+       if (dev->state != USB_STATE_ADDRESS)
+               usb_disable_device (dev, 1);    // Skip ep0
+
        if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                        USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
-                       NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0)
-               goto free_interfaces;
+                       NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0) {
+
+               /* All the old state is gone, so what else can we do?
+                * The device is probably useless now anyway.
+                */
+               cp = NULL;
+       }
 
        dev->actconfig = cp;
-       if (!cp)
+       if (!cp) {
                usb_set_device_state(dev, USB_STATE_ADDRESS);
-       else {
-               usb_set_device_state(dev, USB_STATE_CONFIGURED);
+               goto free_interfaces;
+       }
+       usb_set_device_state(dev, USB_STATE_CONFIGURED);
 
-               /* Initialize the new interface structures and the
-                * hc/hcd/usbcore interface/endpoint state.
-                */
-               for (i = 0; i < nintf; ++i) {
-                       struct usb_interface_cache *intfc;
-                       struct usb_interface *intf;
-                       struct usb_host_interface *alt;
-
-                       cp->interface[i] = intf = new_interfaces[i];
-                       intfc = cp->intf_cache[i];
-                       intf->altsetting = intfc->altsetting;
-                       intf->num_altsetting = intfc->num_altsetting;
-                       kref_get(&intfc->ref);
-
-                       alt = usb_altnum_to_altsetting(intf, 0);
-
-                       /* No altsetting 0?  We'll assume the first altsetting.
-                        * We could use a GetInterface call, but if a device is
-                        * so non-compliant that it doesn't have altsetting 0
-                        * then I wouldn't trust its reply anyway.
-                        */
-                       if (!alt)
-                               alt = &intf->altsetting[0];
-
-                       intf->cur_altsetting = alt;
-                       usb_enable_interface(dev, intf);
-                       intf->dev.parent = &dev->dev;
-                       intf->dev.driver = NULL;
-                       intf->dev.bus = &usb_bus_type;
-                       intf->dev.dma_mask = dev->dev.dma_mask;
-                       intf->dev.release = release_interface;
-                       device_initialize (&intf->dev);
-                       mark_quiesced(intf);
-                       sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
-                                dev->bus->busnum, dev->devpath,
-                                configuration,
-                                alt->desc.bInterfaceNumber);
-               }
-               kfree(new_interfaces);
+       /* Initialize the new interface structures and the
+        * hc/hcd/usbcore interface/endpoint state.
+        */
+       for (i = 0; i < nintf; ++i) {
+               struct usb_interface_cache *intfc;
+               struct usb_interface *intf;
+               struct usb_host_interface *alt;
 
-               if (cp->string == NULL)
-                       cp->string = usb_cache_string(dev,
-                                       cp->desc.iConfiguration);
+               cp->interface[i] = intf = new_interfaces[i];
+               intfc = cp->intf_cache[i];
+               intf->altsetting = intfc->altsetting;
+               intf->num_altsetting = intfc->num_altsetting;
+               kref_get(&intfc->ref);
 
-               /* Now that all the interfaces are set up, register them
-                * to trigger binding of drivers to interfaces.  probe()
-                * routines may install different altsettings and may
-                * claim() any interfaces not yet bound.  Many class drivers
-                * need that: CDC, audio, video, etc.
+               alt = usb_altnum_to_altsetting(intf, 0);
+
+               /* No altsetting 0?  We'll assume the first altsetting.
+                * We could use a GetInterface call, but if a device is
+                * so non-compliant that it doesn't have altsetting 0
+                * then I wouldn't trust its reply anyway.
                 */
-               for (i = 0; i < nintf; ++i) {
-                       struct usb_interface *intf = cp->interface[i];
-
-                       dev_dbg (&dev->dev,
-                               "adding %s (config #%d, interface %d)\n",
-                               intf->dev.bus_id, configuration,
-                               intf->cur_altsetting->desc.bInterfaceNumber);
-                       ret = device_add (&intf->dev);
-                       if (ret != 0) {
-                               dev_err(&dev->dev,
-                                       "device_add(%s) --> %d\n",
-                                       intf->dev.bus_id,
-                                       ret);
-                               continue;
-                       }
-                       usb_create_sysfs_intf_files (intf);
+               if (!alt)
+                       alt = &intf->altsetting[0];
+
+               intf->cur_altsetting = alt;
+               usb_enable_interface(dev, intf);
+               intf->dev.parent = &dev->dev;
+               intf->dev.driver = NULL;
+               intf->dev.bus = &usb_bus_type;
+               intf->dev.dma_mask = dev->dev.dma_mask;
+               intf->dev.release = release_interface;
+               device_initialize (&intf->dev);
+               mark_quiesced(intf);
+               sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
+                        dev->bus->busnum, dev->devpath,
+                        configuration, alt->desc.bInterfaceNumber);
+       }
+       kfree(new_interfaces);
+
+       if (cp->string == NULL)
+               cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
+
+       /* Now that all the interfaces are set up, register them
+        * to trigger binding of drivers to interfaces.  probe()
+        * routines may install different altsettings and may
+        * claim() any interfaces not yet bound.  Many class drivers
+        * need that: CDC, audio, video, etc.
+        */
+       for (i = 0; i < nintf; ++i) {
+               struct usb_interface *intf = cp->interface[i];
+
+               dev_dbg (&dev->dev,
+                       "adding %s (config #%d, interface %d)\n",
+                       intf->dev.bus_id, configuration,
+                       intf->cur_altsetting->desc.bInterfaceNumber);
+               ret = device_add (&intf->dev);
+               if (ret != 0) {
+                       dev_err(&dev->dev, "device_add(%s) --> %d\n",
+                               intf->dev.bus_id, ret);
+                       continue;
                }
+               usb_create_sysfs_intf_files (intf);
        }
 
        return 0;