/*
* GCC likes to generate cmov here, but this branch is extremely
- * predictable (it's just a funciton of time and the likely is
+ * predictable (it's just a function of time and the likely is
* very likely) and there's a data dependence, so force GCC
* to generate a branch instead. I don't barrier() because
* we don't actually need a barrier, and if this function
* this screws up the trace output when tracing a ia32 task.
* Instead of reporting bogus syscalls, just do not trace them.
*
- * If the user realy wants these, then they should use the
+ * If the user really wants these, then they should use the
* raw syscall tracepoints with filtering.
*/
#define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS 1
* This should be totally fair - if anything is waiting, a process that wants a
* lock will go to the back of the queue. When the currently active lock is
* released, if there's a writer at the front of the queue, then that and only
- * that will be woken up; if there's a bunch of consequtive readers at the
+ * that will be woken up; if there's a bunch of consecutive readers at the
* front, then they'll all be woken up, but no other readers will be.
*/
/*
* Note that the LAPIC address is obtained from the MADT (32-bit value)
- * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+ * and (optionally) overridden by a LAPIC_ADDR_OVR entry (64-bit value).
*/
count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
/*
* Note that the LAPIC address is obtained from the MADT (32-bit value)
- * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+ * and (optionally) overridden by a LAPIC_ADDR_OVR entry (64-bit value).
*/
count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
legacy_pic->mask_all();
mask_ioapic_entries();
- /* If irq_remapping_prepare() succeded, try to enable it */
+ /* If irq_remapping_prepare() succeeded, try to enable it */
if (ir_stat >= 0)
ir_stat = try_to_enable_IR();
/* ir_stat contains the remap mode or an error code */
*/
void uv_cpu_init(void)
{
- /* CPU 0 initilization will be done via uv_system_init. */
+ /* CPU 0 initialization will be done via uv_system_init. */
if (!uv_blade_info)
return;
* @device: identity of device
* @enable: on/off
*
- * Activate or deactive power management on either a specific device
+ * Activate or deactivate power management on either a specific device
* or the entire system (%APM_DEVICE_ALL).
*/
#ifdef CONFIG_X86_32
/*
* General Systems BIOSen alias the cpu frequency registers
- * of the Elan at 0x000df000. Unfortuantly, one of the Linux
+ * of the Elan at 0x000df000. Unfortunately, one of the Linux
* drivers subsequently pokes it, and changes the CPU speed.
* Workaround : Remove the unneeded alias.
*/
if (this_cpu->c_identify)
this_cpu->c_identify(c);
- /* Clear/Set all flags overriden by options, after probe */
+ /* Clear/Set all flags overridden by options, after probe */
for (i = 0; i < NCAPINTS; i++) {
c->x86_capability[i] &= ~cpu_caps_cleared[i];
c->x86_capability[i] |= cpu_caps_set[i];
x86_init_cache_qos(c);
/*
- * Clear/Set all flags overriden by options, need do it
+ * Clear/Set all flags overridden by options, need do it
* before following smp all cpus cap AND.
*/
for (i = 0; i < NCAPINTS; i++) {
* "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
* Opteron Processors" (26094 Rev. 3.30 February 2006), section
* "13.2.1.2 SYSCFG Register": "The MtrrFixDramModEn bit should be set
- * to 1 during BIOS initalization of the fixed MTRRs, then cleared to
+ * to 1 during BIOS initialization of the fixed MTRRs, then cleared to
* 0 for operation."
*/
static inline void k8_check_syscfg_dram_mod_en(void)
* events to select for counter rescheduling.
*
* Care must be taken as the rescheduling algorithm is O(n!) which
- * will increase scheduling cycles for an over-commited system
+ * will increase scheduling cycles for an over-committed system
* dramatically. The number of such EVENT_CONSTRAINT_OVERLAP() macros
* and its counter masks must be kept at a minimum.
*/
/*
* return the type of control flow change at address "from"
- * intruction is not necessarily a branch (in case of interrupt).
+ * instruction is not necessarily a branch (in case of interrupt).
*
* The branch type returned also includes the priv level of the
* target of the control flow change (X86_BR_USER, X86_BR_KERNEL).
}
/*
- * Lastly, initalize the hardware
+ * Lastly, initialize the hardware
*/
if (*s) {
if (strcmp(s, "nocfg") == 0)
/*
* The xstateregs_active() routine is the same as the regset_fpregs_active() routine,
* as the "regset->n" for the xstate regset will be updated based on the feature
- * capabilites supported by the xsave.
+ * capabilities supported by the xsave.
*/
int regset_fpregs_active(struct task_struct *target, const struct user_regset *regset)
{
int ret = -ENOEXEC;
struct setup_header *header;
- /* kernel should be atleast two sectors long */
+ /* kernel should be at least two sectors long */
if (len < 2 * 512) {
pr_err("File is too short to be a bzImage\n");
return ret;
};
/**
- * kgdb_arch_init - Perform any architecture specific initalization.
+ * kgdb_arch_init - Perform any architecture specific initialization.
*
- * This function will handle the initalization of any architecture
+ * This function will handle the initialization of any architecture
* specific callbacks.
*/
int kgdb_arch_init(void)
* registered memory location. If the guest happens to shutdown, this memory
* won't be valid. In cases like kexec, in which you install a new kernel, this
* means a random memory location will be kept being written. So before any
- * kind of shutdown from our side, we unregister the clock by writting anything
+ * kind of shutdown from our side, we unregister the clock by writing anything
* that does not have the 'enable' bit set in the msr
*/
#ifdef CONFIG_KEXEC_CORE
local_irq_save(flags);
/*
- * We're comming out of suspend, there's no concurrency yet; don't
+ * We're coming out of suspend, there's no concurrency yet; don't
* bother being nice about the RCU stuff, just write to both
* data fields.
*/
static bool spte_has_volatile_bits(u64 spte)
{
/*
- * Always atomicly update spte if it can be updated
+ * Always atomically update spte if it can be updated
* out of mmu-lock, it can ensure dirty bit is not lost,
* also, it can help us to get a stable is_writable_pte()
* to ensure tlb flush is not missed.
/*
* For the spte updated out of mmu-lock is safe, since
- * we always atomicly update it, see the comments in
+ * we always atomically update it, see the comments in
* spte_has_volatile_bits().
*/
if (spte_is_locklessly_modifiable(old_spte) &&
return kvm_set_cr4(vcpu, val);
}
-/* called to set cr0 as approriate for clts instruction exit. */
+/* called to set cr0 as appropriate for clts instruction exit. */
static void handle_clts(struct kvm_vcpu *vcpu)
{
if (is_guest_mode(vcpu)) {
/* The value to write might be 32 or 64 bits, depending on L1's long
* mode, and eventually we need to write that into a field of several
* possible lengths. The code below first zero-extends the value to 64
- * bit (field_value), and then copies only the approriate number of
+ * bit (field_value), and then copies only the appropriate number of
* bits into the vmcs12 field.
*/
u64 field_value = 0;
/*
* GCC likes to generate cmov here, but this branch is extremely
- * predictable (it's just a funciton of time and the likely is
+ * predictable (it's just a function of time and the likely is
* very likely) and there's a data dependence, so force GCC
* to generate a branch instead. I don't barrier() because
* we don't actually need a barrier, and if this function
/*
* ISO C memset - set a memory block to a byte value. This function uses fast
* string to get better performance than the original function. The code is
- * simpler and shorter than the orignal function as well.
+ * simpler and shorter than the original function as well.
*
* rdi destination
* rsi value (char)
/*
* This covers 32-bit emulation as well as 32-bit kernels
- * running on 64-bit harware.
+ * running on 64-bit hardware.
*/
if (!is_64bit_mm(mm))
return (4ULL * GB) / MPX_BD_NR_ENTRIES_32;
/*
* 'x86_virt_bits' returns what the hardware is capable
- * of, and returns the full >32-bit adddress space when
+ * of, and returns the full >32-bit address space when
* running 32-bit kernels on 64-bit hardware.
*/
virt_space = (1ULL << boot_cpu_data.x86_virt_bits);
PAT_WT = 4, /* Write Through */
PAT_WP = 5, /* Write Protected */
PAT_WB = 6, /* Write Back (default) */
- PAT_UC_MINUS = 7, /* UC, but can be overriden by MTRR */
+ PAT_UC_MINUS = 7, /* UC, but can be overridden by MTRR */
};
#define CM(c) (_PAGE_CACHE_MODE_ ## c)
/*
- * platform_bma023.c: bma023 platform data initilization file
+ * platform_bma023.c: bma023 platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
*
/*
- * platform_emc1403.c: emc1403 platform data initilization file
+ * platform_emc1403.c: emc1403 platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_gpio_keys.c: gpio_keys platform data initilization file
+ * platform_gpio_keys.c: gpio_keys platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_lis331.c: lis331 platform data initilization file
+ * platform_lis331.c: lis331 platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_max7315.c: max7315 platform data initilization file
+ * platform_max7315.c: max7315 platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_mpu3050.c: mpu3050 platform data initilization file
+ * platform_mpu3050.c: mpu3050 platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_msic.c: MSIC platform data initilization file
+ * platform_msic.c: MSIC platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_msic_audio.c: MSIC audio platform data initilization file
+ * platform_msic_audio.c: MSIC audio platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_msic_battery.c: MSIC battery platform data initilization file
+ * platform_msic_battery.c: MSIC battery platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_msic_gpio.c: MSIC GPIO platform data initilization file
+ * platform_msic_gpio.c: MSIC GPIO platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_msic_ocd.c: MSIC OCD platform data initilization file
+ * platform_msic_ocd.c: MSIC OCD platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_msic_power_btn.c: MSIC power btn platform data initilization file
+ * platform_msic_power_btn.c: MSIC power btn platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_msic_thermal.c: msic_thermal platform data initilization file
+ * platform_msic_thermal.c: msic_thermal platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_pmic_gpio.c: PMIC GPIO platform data initilization file
+ * platform_pmic_gpio.c: PMIC GPIO platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_tc35876x.c: tc35876x platform data initilization file
+ * platform_tc35876x.c: tc35876x platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
/*
- * platform_tca6416.c: tca6416 platform data initilization file
+ * platform_tca6416.c: tca6416 platform data initialization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
*/
/* A stack for the loaded kernel.
- * Seperate and in the data section so it can be prepopulated.
+ * Separate and in the data section so it can be prepopulated.
*/
.data
.balign 4096
xen_cleanhighmap(addr, addr + size);
xen_start_info->pt_base = (unsigned long)__va(__pa(xen_start_info->pt_base));
#ifdef DEBUG
- /* This is superflous and is not neccessary, but you know what
+ /* This is superfluous and is not necessary, but you know what
* lets do it. The MODULES_VADDR -> MODULES_END should be clear of
* anything at this stage. */
xen_cleanhighmap(MODULES_VADDR, roundup(MODULES_VADDR, PUD_SIZE) - 1);
/*
* At the start of the day - when Xen launches a guest, it has already
* built pagetables for the guest. We diligently look over them
- * in xen_setup_kernel_pagetable and graft as appropiate them in the
+ * in xen_setup_kernel_pagetable and graft as appropriate them in the
* init_level4_pgt and its friends. Then when we are happy we load
* the new init_level4_pgt - and continue on.
*
struct remap_data *rmd = data;
pte_t pte = pte_mkspecial(mfn_pte(*rmd->mfn, rmd->prot));
- /* If we have a contigious range, just update the mfn itself,
+ /* If we have a contiguous range, just update the mfn itself,
else update pointer to be "next mfn". */
if (rmd->contiguous)
(*rmd->mfn)++;
rmd.mfn = gfn;
rmd.prot = prot;
- /* We use the err_ptr to indicate if there we are doing a contigious
+ /* We use the err_ptr to indicate if there we are doing a contiguous
* mapping or a discontigious mapping. */
rmd.contiguous = !err_ptr;
(1 << XENFEAT_auto_translated_physmap) | \
(1 << XENFEAT_supervisor_mode_kernel) | \
(1 << XENFEAT_hvm_callback_vector))
-/* The XENFEAT_writable_page_tables is not stricly neccessary as we set that
+/* The XENFEAT_writable_page_tables is not stricly necessary as we set that
* up regardless whether this CONFIG option is enabled or not, but it
* clarifies what the right flags need to be.
*/
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff