net: dsa: mv88e6060: replace magic values with register defines

To align with the mv88e6xxx code, use the register defines to
access all the register addresses and bit fields.

Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index cd08079e84ad59e49f18255af7c26f448ddaa03c..0527f485c3dc7c4d1cc689a7707820af993bc68f 100644 (file)
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -15,9 +15,7 @@
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <net/dsa.h>
-
-#define REG_PORT(p)            (8 + (p))
-#define REG_GLOBAL             0x0f
+#include "mv88e6060.h"
 
 static int reg_read(struct dsa_switch *ds, int addr, int reg)
 {
@@ -67,13 +65,14 @@ static char *mv88e6060_probe(struct device *host_dev, int sw_addr)
        if (bus == NULL)
                return NULL;
 
-       ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
+       ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
        if (ret >= 0) {
-               if (ret == 0x0600)
+               if (ret == PORT_SWITCH_ID_6060)
                        return "Marvell 88E6060 (A0)";
-               if (ret == 0x0601 || ret == 0x0602)
+               if (ret == PORT_SWITCH_ID_6060_R1 ||
+                   ret == PORT_SWITCH_ID_6060_R2)
                        return "Marvell 88E6060 (B0)";
-               if ((ret & 0xfff0) == 0x0600)
+               if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
                        return "Marvell 88E6060";
        }
 
@@ -87,22 +86,26 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
        unsigned long timeout;
 
        /* Set all ports to the disabled state. */
-       for (i = 0; i < 6; i++) {
-               ret = REG_READ(REG_PORT(i), 0x04);
-               REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+       for (i = 0; i < MV88E6060_PORTS; i++) {
+               ret = REG_READ(REG_PORT(i), PORT_CONTROL);
+               REG_WRITE(REG_PORT(i), PORT_CONTROL,
+                         ret & ~PORT_CONTROL_STATE_MASK);
        }
 
        /* Wait for transmit queues to drain. */
        usleep_range(2000, 4000);
 
        /* Reset the switch. */
-       REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
+       REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
+                 GLOBAL_ATU_CONTROL_SWRESET |
+                 GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
+                 GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
 
        /* Wait up to one second for reset to complete. */
        timeout = jiffies + 1 * HZ;
        while (time_before(jiffies, timeout)) {
-               ret = REG_READ(REG_GLOBAL, 0x00);
-               if (ret & 0x800)
+               ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
+               if (ret & GLOBAL_STATUS_INIT_READY)
                        break;
 
                usleep_range(1000, 2000);
@@ -119,13 +122,15 @@ static int mv88e6060_setup_global(struct dsa_switch *ds)
         * set the maximum frame size to 1536 bytes, and mask all
         * interrupt sources.
         */
-       REG_WRITE(REG_GLOBAL, 0x04, 0x400);
+       REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
 
        /* Enable automatic address learning, set the address
         * database size to 1024 entries, and set the default aging
         * time to 5 minutes.
         */
-       REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
+       REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
+                 GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
+                 GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
 
        return 0;
 }
@@ -139,25 +144,30 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
         * state to Forwarding.  Additionally, if this is the CPU
         * port, enable Ingress and Egress Trailer tagging mode.
         */
-       REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ?  0x4103 : 0x0003);
+       REG_WRITE(addr, PORT_CONTROL,
+                 dsa_is_cpu_port(ds, p) ?
+                       PORT_CONTROL_TRAILER |
+                       PORT_CONTROL_INGRESS_MODE |
+                       PORT_CONTROL_STATE_FORWARDING :
+                       PORT_CONTROL_STATE_FORWARDING);
 
        /* Port based VLAN map: give each port its own address
         * database, allow the CPU port to talk to each of the 'real'
         * ports, and allow each of the 'real' ports to only talk to
         * the CPU port.
         */
-       REG_WRITE(addr, 0x06,
-                       ((p & 0xf) << 12) |
-                        (dsa_is_cpu_port(ds, p) ?
-                               ds->phys_port_mask :
-                               (1 << ds->dst->cpu_port)));
+       REG_WRITE(addr, PORT_VLAN_MAP,
+                 ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
+                  (dsa_is_cpu_port(ds, p) ?
+                       ds->phys_port_mask :
+                       BIT(ds->dst->cpu_port)));
 
        /* Port Association Vector: when learning source addresses
         * of packets, add the address to the address database using
         * a port bitmap that has only the bit for this port set and
         * the other bits clear.
         */
-       REG_WRITE(addr, 0x0b, 1 << p);
+       REG_WRITE(addr, PORT_ASSOC_VECTOR, BIT(p));
 
        return 0;
 }
@@ -177,7 +187,7 @@ static int mv88e6060_setup(struct dsa_switch *ds)
        if (ret < 0)
                return ret;
 
-       for (i = 0; i < 6; i++) {
+       for (i = 0; i < MV88E6060_PORTS; i++) {
                ret = mv88e6060_setup_port(ds, i);
                if (ret < 0)
                        return ret;
@@ -189,16 +199,16 @@ static int mv88e6060_setup(struct dsa_switch *ds)
 static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
 {
        /* Use the same MAC Address as FD Pause frames for all ports */
-       REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 9) | addr[1]);
-       REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
-       REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
+       REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 9) | addr[1]);
+       REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
+       REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
 
        return 0;
 }
 
 static int mv88e6060_port_to_phy_addr(int port)
 {
-       if (port >= 0 && port <= 5)
+       if (port >= 0 && port < MV88E6060_PORTS)
                return port;
        return -1;
 }