Merge tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.9 series:

  Subsystem improvements:

   - do away with the last users of the obsolete Kconfig options
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
     always sounded like an item on a wishlist to Santa Claus to me). We
     can now select GPIOLIB and be done with it, for all archs. After
     some struggle it even work on UM. Not that it has GPIO, but if it
     wants to, it can select the library.

   - continued efforts to make drivers properly either tristate or bool.

   - introduce a warning for drivers assigning default triggers to their
     irqchip lines when probed from device tree, so we find and fix
     these ambigous drivers. It is agreed that in the OF config path,
     the device tree defines trigger characteristics.

   - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips.

   - we introduce the ability to mark certain IRQ lines as "unusable" as
     they can be taken by BIOS/firmware, unrouted in silicon and
     generally nasty if you use them, and such things. This is put to
     good use in the STMPE driver and also in the Cherryview pin control
     driver.

   - a new "mockup" virtual GPIO device that can be used for testing.
     The plan is to add unit tests under tools/* for exercising this
     device and verify that the kernel code paths are working as they
     should.

   - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
     implicit all the time, but when people started building UM with
     allyesconfig or allmodconfig it exploded in their face.

   - move some stray bits of device tree and ACPI HW description
     callbacks down into their respective implementation silo. These
     were causing issues when compiling on !HAS_IOMEM as well, so now
     eventually UM compiles the GPIOLIB library if it wants to.

  New drivers:

   - new driver for the Aspeed GPIO front-end companion to the pin
     controller merged through the pin control tree.

   - new driver for the LP873x PMIC GPIO portions.

   - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900,
     TS-7970, TS-7990 and TS-4100.

   - new driver for the Broadcom BCM63xx series including BCM6338 and
     BCM6345.

   - new driver for the Intel WhiskeyCove PMIC GPIO.

   - new driver for the Allwinner AXP209 PMIC GPIO portions.

   - new driver for Diamond Systems 48 line GPIO-MM, another of these
     port-mapped I/O expansion cards.

   - support the STMicroelectronics STMPE1600 variant in the STMPE
     driver.

  Driver improvements:

   - the STMPE driver now supports rising/falling edge detection
     properly for IRQs.

   - the PCA954x will now fetch and enable its VCC regulator properly.

   - major rework of the PCA953x driver with the goal of eventually
     switching it over to use regmap and thus modernize it even more.

   - switch the IOP driver to use the generic MMIO GPIO library.

   - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
     over to this subsystem from MFD, achieveing some separation of
     concerns"

* tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits)
  gpio: add missing static inline
  gpio: OF: localize some gpiochip init functions
  gpio: acpi: separation of concerns
  gpio: OF: separation of concerns
  gpio: make memory-mapped drivers depend on HAS_IOMEM
  gpio: stmpe: use BIT() macro
  gpio: stmpe: forbid unused lines to be mapped as IRQs
  mfd/gpio: Move HTC GPIO driver to GPIO subsystem
  gpio: MAINTAINERS: Add an entry for GPIO mockup driver
  gpio/mockup: add virtual gpio device
  gpio: Added zynq specific check for special pins on bank zero
  gpio: axp209: Implement get_direction
  gpio: aspeed: remove redundant return value check
  gpio: loongson1: remove redundant return value check
  ARM: omap2: fix missing include
  gpio: tc3589x: fix up complaints on unsigned
  gpio: tc3589x: add .get_direction() and small cleanup
  gpio: f7188x: use gpiochip_get_data instead of container_of
  gpio: tps65218: use devm_gpiochip_add_data() for gpio registration
  gpio: aspeed: fix return value check in aspeed_gpio_probe()
  ...

diff --cc Documentation/kernel-parameters.txt
Simple merge

diff --cc MAINTAINERS
Simple merge

diff --cc arch/arm64/Kconfig
Simple merge

diff --cc arch/arm64/Kconfig.platforms
index 96ef543f6bd8b59bda5432b9f44316aaf1d6537c,41d82b327e6a0eeb61d24f65e0b7d1d80318b703..b6b36570b1c0fae5ba3f2ab52b78e62ac58cab84
--- 1/arch/arm64/Kconfig.platforms
--- 2/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@@ -161,6 -158,8 +160,7 @@@ config ARCH_TEGR
        select CLKSRC_MMIO
        select CLKSRC_OF
        select GENERIC_CLOCKEVENTS
 -      select HAVE_CLK
+       select GPIOLIB
        select PINCTRL
        select RESET_CONTROLLER
        help

diff --cc drivers/gpio/Kconfig
Simple merge

diff --cc drivers/gpio/gpio-mxc.c
index e38989a4fa0c6b7ce0384722a07f65154aea178b,e35af5249478b24ac02720abc3a14216c9c0109e..c1a1e00b8cb024f12d6243226fc01de4aa37064a
--- 1/drivers/gpio/gpio-mxc.c
--- 2/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@@ -515,10 -510,4 +515,4 @@@ static int __init gpio_mxc_init(void
  {
        return platform_driver_register(&mxc_gpio_driver);
  }
 -postcore_initcall(gpio_mxc_init);
 +subsys_initcall(gpio_mxc_init);
- 
- MODULE_AUTHOR("Freescale Semiconductor, "
-             "Daniel Mack <danielncaiaq.de>, "
-             "Juergen Beisert <kernel@pengutronix.de>");
- MODULE_DESCRIPTION("Freescale MXC GPIO");
- MODULE_LICENSE("GPL");

diff --cc drivers/gpio/gpiolib-of.c
Simple merge

diff --cc drivers/regulator/Kconfig
Simple merge