Fixed multiple spelling errors.
Signed-off-by: Carlos E. Garcia <carlos@cgarcia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
/**
* struct ion_buffer - metadata for a particular buffer
- * @ref: refernce count
+ * @ref: reference count
* @node: node in the ion_device buffers tree
* @dev: back pointer to the ion_device
* @heap: back pointer to the heap the buffer came from
* an ion_phys_addr_t (and someday a phys_addr_t)
* @lock: protects the buffers cnt fields
* @kmap_cnt: number of times the buffer is mapped to the kernel
- * @vaddr: the kenrel mapping if kmap_cnt is not zero
+ * @vaddr: the kernel mapping if kmap_cnt is not zero
* @dmap_cnt: number of times the buffer is mapped for dma
* @sg_table: the sg table for the buffer if dmap_cnt is not zero
* @pages: flat array of pages in the buffer -- used by fault
/**
* ion_heap_freelist_drain - drain the deferred free list
* @heap: the heap
- * @size: ammount of memory to drain in bytes
+ * @size: amount of memory to drain in bytes
*
* Drains the indicated amount of memory from the deferred freelist immediately.
* Returns the total amount freed. The total freed may be higher depending
* DOC: ION_IOC_SYNC - syncs a shared file descriptors to memory
*
* Deprecated in favor of using the dma_buf api's correctly (syncing
- * will happend automatically when the buffer is mapped to a device).
+ * will happen automatically when the buffer is mapped to a device).
* If necessary should be used after touching a cached buffer from the cpu,
* this will make the buffer in memory coherent.
*/
/*
* COMEDI_CMDTEST ioctl
- * asynchronous aquisition command testing
+ * asynchronous acquisition command testing
*
* arg:
* pointer to comedi_cmd structure
* checkpatch fixes
-* remove unecessary comments
-* remove unecessary error messages. Example kzalloc() has its
+* remove unnecessary comments
+* remove unnecessary error messages. Example kzalloc() has its
own error message. Adding an extra one is useless.
* use goto statements for error handling when appropriate
-* there is a lot of unecessary code in the driver. It was
+* there is a lot of unnecessary code in the driver. It was
originally a standalone driver. Remove uneeded code.
Please send patches to Greg Kroah-Hartman <greg@kroah.com> and
memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n);
/*
- * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed
+ * Since RX_FIFO_DATA_ERROR was 0, we are guaranteed
* that all the data currently in the FIFO is free of
* breaks and parity/frame/orun errors.
*/
}
/*-------------------------------------------------------------*/
- /* Start tranfer */
+ /* Start transfer */
iBufSize = req->req.length - req->req.actual;
if (iBufSize > 0)
result = _nbu2ss_epn_in_data(udc, ep, req, iBufSize);
tristate "FB driver for the AGM1264K-FL LCD display"
depends on FB_TFT
help
- Framebuffer support for the AGM1264K-FL LCD display (two Samsung KS0108 compatable chips)
+ Framebuffer support for the AGM1264K-FL LCD display (two Samsung KS0108 compatible chips)
config FB_TFT_BD663474
tristate "FB driver for the BD663474 LCD Controller"
* @size: 'apparent' size, in bytes, of fifo
* @align: dma alignment to maintain (should be at least cpu cache alignment),
* must be power of 2
- * @tx_limit: maximum # of bytes transmissable per dma (rounded down to
+ * @tx_limit: maximum # of bytes transmissible per dma (rounded down to
* multiple of alignment, but at least align size)
* @open_limit: maximum # of outstanding dma transactions allowed
* @gfp_mask: get_free_pages mask, passed to kmalloc()
* prevented with the IN_TX flag. Scheduled under lock to
* limit scheduling when fifo has just been drained.
* @tx_fifo: fifo used to store & block-up writes for dma to remote
- * @max_payload: max bytes transmissable per dma (based on peer's max_payload)
+ * @max_payload: max bytes transmissible per dma (based on peer's max_payload)
* @status_mask: UART_LSR_* bitmask significant to rx (based on termios)
* @ignore_mask: UART_LSR_* bitmask of states to ignore (also based on termios)
* @break_ctl: if set, port is 'sending break' to remote
* info->write_event_value:
Write the value associated with on sensor event detectors. E.g.
a threshold above which an interrupt occurs. Note that the
- meaning of the value to be set is event type dependant.
+ meaning of the value to be set is event type dependent.
- indio_dev->modes:
Specify whether direct access and / or ring buffer access is supported.
* @accel_calibscale: cache for acceleration calibscale
* @lock: lock to ensure state is consistent
* @event_irq: irq number for event line (faked)
- * @event_val: cache for event theshold value
+ * @event_val: cache for event threshold value
* @event_en: cache of whether event is enabled
*/
struct iio_dummy_state {
* Possible remaining coding style fix.
* Remove deadcode.
-* Seperate client/server functionality. Functions only used by server can be
+* Separate client/server functionality. Functions only used by server can be
removed from client.
* Clean up libcfs layer. Ideally we can remove include/linux/libcfs entirely.
* Clean up CLIO layer. Lustre client readahead/writeback control needs to better
#define BCM2048_FREQ_ERROR_FLOOR -20
#define BCM2048_FREQ_ERROR_ROOF 20
-/* -60 dB is reported as full signal strenght */
+/* -60 dB is reported as full signal strength */
#define BCM2048_RSSI_LEVEL_BASE -60
#define BCM2048_RSSI_LEVEL_ROOF -100
#define BCM2048_RSSI_LEVEL_ROOF_NEG 100
} else {
/*
* RSSI level -60 dB is defined to report full
- * signal strenght
+ * signal strength
*/
rssi = bcm2048_get_fm_rssi(bdev);
if (rssi >= BCM2048_RSSI_LEVEL_BASE) {
usb->index) ^ 4;
int words = available;
- /* Limit the amount of data to waht the SW fifo has */
+ /* Limit the amount of data to what the SW fifo has */
if (fifo->entry[i].size <= available) {
words = fifo->entry[i].size;
fifo->tail++;
transaction->xfersize = usbc_hctsiz.s.xfersize;
transaction->pktcnt = usbc_hctsiz.s.pktcnt;
}
- /* Remeber when we start a split transaction */
+ /* Remember when we start a split transaction */
if (cvmx_usb_pipe_needs_split(usb, pipe))
usb->active_split = transaction;
USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
* struct cvmx_usbnx_usbp_ctl_status_s
* @txrisetune: HS Transmitter Rise/Fall Time Adjustment
* @txvreftune: HS DC Voltage Level Adjustment
- * @txfslstune: FS/LS Source Impedence Adjustment
+ * @txfslstune: FS/LS Source Impedance Adjustment
* @txhsxvtune: Transmitter High-Speed Crossover Adjustment
* @sqrxtune: Squelch Threshold Adjustment
* @compdistune: Disconnect Threshold Adjustment
/* | 1byte|----8bytes----|1byte|--5bytes--| */
/* | | Reserved(14bytes) | */
-/* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */
+/* PG data exclude header, dummy 6 bytes from CP test and reserved 1byte. */
#define EFUSE_OOB_PROTECT_BYTES 15
#define HWSET_MAX_SIZE_88E 512
/* 9bytes + 1byt + 5bytes and pre 1byte. */
/* For worst case: */
/* | 2byte|----8bytes----|1byte|--7bytes--| 92D */
-/* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */
+/* PG data exclude header, dummy 7 bytes from CP test and reserved 1byte. */
#define EFUSE_OOB_PROTECT_BYTES_88E 18
#define EFUSE_PROTECT_BYTES_BANK_88E 16
* Prepare SW resource for HW dynamic mechanism.
*
* Assumption:
- * This function is only invoked at driver intialization once.
+ * This function is only invoked at driver initialization once.
*/
void init_hal_dm(struct net_device *dev)
{
u8 r8712_xmitframe_aggr_1st(struct xmit_buf *pxmitbuf,
struct xmit_frame *pxmitframe)
{
- /* linux complete context doesnt need to protect */
+ /* linux complete context doesn't need to protect */
pxmitframe->pxmitbuf = pxmitbuf;
pxmitbuf->priv_data = pxmitframe;
pxmitframe->pxmit_urb[0] = pxmitbuf->pxmit_urb[0];
#define bCCKRxIG 0x7f00
#define bCCKLNAPolarity 0x800000
#define bCCKRx1stGain 0x7f0000
-#define bCCKRFExtend 0x20000000 /* CCK Rx inital gain polarity */
+#define bCCKRFExtend 0x20000000 /* CCK Rx initial gain polarity */
#define bCCKRxAGCSatLevel 0x1f000000
#define bCCKRxAGCSatCount 0xe0
#define bCCKRxRFSettle 0x1f /* AGCsamp_dly */
value |= (GET_PWR_CFG_VALUE(PwrCfgCmd) &
GET_PWR_CFG_MASK(PwrCfgCmd));
- /* Write the value back to sytem register */
+ /* Write the value back to system register */
rtl8723au_write8(padapter, offset, value);
break;
{0x5ea42b, 0xa630, 0x5e431c}, /* 11:airgocap AP */
};
-/* EDCA Paramter for AP/ADSL by Mingzhi 2011-11-22 */
+/* EDCA Parameter for AP/ADSL by Mingzhi 2011-11-22 */
/* Global var */
u32 OFDMSwingTable23A[OFDM_TABLE_SIZE_92D] = {
/* value16 |= (APDM_HOST | FSM_HSUS |/PFM_ALDN); */
/* 2010/08/31 According to Filen description, we need to
use HW to shut down 8051 automatically. */
- /* Becasue suspend operatione need the asistance of 8051
+ /* Because suspend operation need the asistance of 8051
to wait for 3ms. */
value16 = APDM_HOST | AFSM_HSUS | PFM_ALDN;
} else {
/* */
/* 1. Read PHY_REG.TXT BB INIT!! */
- /* We will seperate as 88C / 92C according to chip version */
+ /* We will separate as 88C / 92C according to chip version */
/* */
ODM_ReadAndConfig_PHY_REG_1T_8723A(&pHalData->odmpriv);
/* Currently, we cannot fully disable driver dynamic tx power
* mechanism because it is referenced by BT coexist mechanism. */
/* In the future, two mechanism shall be separated from each other
- * and maintained independantly. Thanks for Lanhsin's reminder. */
+ * and maintained independently. Thanks for Lanhsin's reminder. */
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) {
TxAGC[RF_PATH_A] = 0x10101010;
TxAGC[RF_PATH_B] = 0x10101010;
/* Currently, we cannot fully disable driver dynamic tx power mechanism
because it is referenced by BT coexist mechanism. */
/* In the future, two mechanism shall be separated from each other and
- maintained independantly. Thanks for Lanhsin's reminder. */
+ maintained independently. Thanks for Lanhsin's reminder. */
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1)
writeVal = 0x14141414;
}
/* (1) The sequence number of each non-Qos frame / broadcast / multicast / */
- /* mgnt frame should be controled by Hw because Fw will also send null data */
+ /* mgnt frame should be controlled by Hw because Fw will also send null data */
/* which we cannot control when Fw LPS enable. */
/* --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */
/* (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */
/* 2010.09.08 hpfan */
/* Since ADF is removed from RCR, ps-poll will not be indicate
to driver, */
- /* RxFilterMap should mask ps-poll to gurantee AP mode can
+ /* RxFilterMap should mask ps-poll to guarantee AP mode can
rx ps-poll. */
/* value16 = 0x400; */
/* rtl8723au_write16(Adapter, REG_RXFLTMAP1, value16); */
/* Define the debug levels */
/* */
/* 1. DBG_TRACE and DBG_LOUD are used for normal cases. */
-/* So that, they can help SW engineer to develope or trace states changed */
+/* So that, they can help SW engineer to develop or trace states changed */
/* and also help HW enginner to trace every operation to and from HW, */
/* e.g IO, Tx, Rx. */
/* */
/* | | Reserved(14bytes) | */
/* */
-/* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */
+/* PG data exclude header, dummy 6 bytes from CP test and reserved 1byte. */
#define EFUSE_OOB_PROTECT_BYTES 15
#define EFUSE_REAL_CONTENT_LEN_8723A 512
Result:
0x00: success
-0x01: sucess, and check Response.
+0x01: success, and check Response.
0x02: cmd ignored due to duplicated sequcne number
0x03: cmd dropped due to invalid cmd code
0x04: reserved.
#define WIFI_SITE_MONITOR 0x00000800
#define WIFI_MP_STATE 0x00010000
-#define WIFI_MP_CTX_BACKGROUND 0x00020000 /* in continous tx background */
-#define WIFI_MP_CTX_ST 0x00040000 /* in continous tx with single-tone */
-#define WIFI_MP_CTX_BACKGROUND_PENDING 0x00080000 /* pending in continous tx background due to out of skb */
-#define WIFI_MP_CTX_CCK_HW 0x00100000 /* in continous tx */
-#define WIFI_MP_CTX_CCK_CS 0x00200000 /* in continous tx with carrier suppression */
+#define WIFI_MP_CTX_BACKGROUND 0x00020000 /* in continuous tx background */
+#define WIFI_MP_CTX_ST 0x00040000 /* in continuous tx with single-tone */
+#define WIFI_MP_CTX_BACKGROUND_PENDING 0x00080000 /* pending in continuous tx background due to out of skb */
+#define WIFI_MP_CTX_CCK_HW 0x00100000 /* in continuous tx */
+#define WIFI_MP_CTX_CCK_CS 0x00200000 /* in continuous tx with carrier suppression */
#define WIFI_MP_LPBK_STATE 0x00400000
#define _FW_UNDER_LINKING WIFI_UNDER_LINKING
/* Note: */
/* We just add new channel plan when the new channel plan is different from any of the following */
/* channel plan. */
-/* If you just wnat to customize the acitions(scan period or join actions) about one of the channel plan, */
+/* If you just want to customize the actions(scan period or join actions) about one of the channel plan, */
/* customize them in struct rt_channel_info in the RT_CHANNEL_LIST. */
/* */
enum { /* _RT_CHANNEL_DOMAIN */
*/
struct sta_info *sta_aid[NUM_STA];
- u16 sta_dz_bitmap;/* only support 15 stations, staion aid bitmap
+ u16 sta_dz_bitmap;/* only support 15 stations, station aid bitmap
* for sleeping sta. */
u16 tim_bitmap;/* only support 15 stations,
* aid=0~15 mapping bit0~bit15 */
#warning "big endian on target cpu and enable nature big endian support of 718 capability !"
#define PEEK32(addr) __raw_readl(mmio750 + addr)
#define POKE32(addr,data) __raw_writel(data, mmio750 + addr)
-#else /* software control endianess */
+#else /* software control endianness */
#define PEEK32(addr) readl(addr + mmio750)
#define POKE32(addr,data) writel(data, addr + mmio750)
#endif
/* May a hardware bug or just my test chip (not confirmed).
* PANEL_DISPLAY_CTRL register seems requiring few writes
- * before a value can be succesfully written in.
+ * before a value can be successfully written in.
* Added some masks to mask out the reserved bits.
* Note: This problem happens by design. The hardware will wait for the
* next vertical sync to turn on/off the plane.
#define DISPLAY_CONTROL_750LE 0x80288
/* Palette RAM */
-/* Panel Pallete register starts at 0x080400 ~ 0x0807FC */
+/* Panel Palette register starts at 0x080400 ~ 0x0807FC */
#define PANEL_PALETTE_RAM 0x080400
-/* Panel Pallete register starts at 0x080C00 ~ 0x080FFC */
+/* Panel Palette register starts at 0x080C00 ~ 0x080FFC */
#define CRT_PALETTE_RAM 0x080C00
/* 2D registers
-/* below sii164 function is not neccessary */
+/* below sii164 function is not necessary */
#ifdef SII164_FULL_FUNCTIONS
/*
* sii164CheckInterrupt
- * Checks if interrupt has occured.
+ * Checks if interrupt has occurred.
*
* Output:
* 0 - No interrupt
- 2D acceleration
- 16MB integrated video memory
-About the kernel module paramter of driver:
+About the kernel module parameter of driver:
Use 1280,8bpp index color and 60 hz mode:
insmod ./sm750fb.ko g_option="1280x1024-8@60"
and user can use con2fb to link fbX and ttyX
Notes:
- 1) if you build the driver with built-in method, the paramter
+ 1) if you build the driver with built-in method, the parameter
you edited in the grub config file will be also the
- same format as above modular method,but additionaly add
+ same format as above modular method,but additionally add
"video=sm750fb:"
ahead of parameters,so,it looks like:
video=sm750fb:noaccel,1280x1024@60,otherparam,etc...
it equal to modular method with below command:
insmod ./sm750fb.ko g_option="noaccel:1280x1024@60:otherparm:etc..."
- 2) if you put 800x600 into the paramter without bpp and
+ 2) if you put 800x600 into the parameter without bpp and
refresh rate, kernel driver will defaulty use 16bpp and 60hz
Important:
/*
* If not use spin_lock,system will die if user load driver
- * and immediatly unload driver frequently (dual)
+ * and immediately unload driver frequently (dual)
*/
if (share->dual)
spin_lock(&share->slock);
/*
* If not use spin_lock, system will die if user load driver
- * and immediatly unload driver frequently (dual)
+ * and immediately unload driver frequently (dual)
*/
if (share->dual)
spin_lock(&share->slock);
_do_work:
/*
* If not use spin_lock, system will die if user load driver
- * and immediatly unload driver frequently (dual)
+ * and immediately unload driver frequently (dual)
*/
if (share->dual)
spin_lock(&share->slock);
ret = pci_set_power_state(pdev, PCI_D0);
if (ret) {
- pr_err("error:%d occured in pci_set_power_state\n", ret);
+ pr_err("error:%d occurred in pci_set_power_state\n", ret);
return ret;
}
pci_restore_state(pdev);
ret = pci_enable_device(pdev);
if (ret) {
- pr_err("error:%d occured in pci_enable_device\n", ret);
+ pr_err("error:%d occurred in pci_enable_device\n", ret);
return ret;
}
pci_set_master(pdev);
pr_err("Unable to setup MTRR.\n");
} else {
share->mtrr.vram_added = 1;
- pr_info("MTRR added succesfully\n");
+ pr_info("MTRR added successfully\n");
}
}
#endif
#if 0
/* Program pitch (distance between the 1st points of two adjacent lines).
Note that input pitch is BYTE value, but the 2D Pitch register uses
- pixel values. Need Byte to pixel convertion.
+ pixel values. Need Byte to pixel conversion.
*/
if(Bpp == 3){
sx *= 3;
#if 0
/* Program pitch (distance between the 1st points of two adjacent lines).
Note that input pitch is BYTE value, but the 2D Pitch register uses
- pixel values. Need Byte to pixel convertion.
+ pixel values. Need Byte to pixel conversion.
*/
if(bytePerPixel == 3 ){
dx *= 3;
};
/* sm750_share stands for a presentation of two frame buffer
- that use one sm750 adaptor, it is similiar to the super class of lynx_share
+ that use one sm750 adaptor, it is similar to the super class of lynx_share
in C++
*/
#define POSTCODE_SEVERITY_ERR DIAG_SEVERITY_ERR
#define POSTCODE_SEVERITY_WARNING DIAG_SEVERITY_WARNING
#define POSTCODE_SEVERITY_INFO DIAG_SEVERITY_PRINT /* TODO-> Info currently
- * doesnt show, so we
+ * doesn't show, so we
* set info=warning */
/* example call of POSTCODE_LINUX_2(VISOR_CHIPSET_PC, POSTCODE_SEVERITY_ERR);
* Please also note that the resulting postcode is in hex, so if you are
uRTSFrameLen -= 4;
}
- /* Note: So far RTSHead dosen't appear in ATIM & Beacom DMA, so we don't need to take them into account.
+ /* Note: So far RTSHead doesn't appear in ATIM & Beacom DMA, so we don't need to take them into account.
Otherwise, we need to modify codes for them. */
if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {
if (byFBOption == AUTO_FB_NONE) {
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff