ARM: mvebu: Enable NAND controller in A370 Reference Design board

Marvell's Armada 370 Reference Design has a NAND flash, so enable it in
the devicetree and add the partitions as prepared in the factory images.

In order to skip the driver's custom device detection and use only ONFI
detection, the "marvell,keep-config" parameter is used. This is needed
because we have no support for setting the timings parameters yet.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index f81810a596292ffa4494d5b50b34bdc974118ecf..abbb807459d26d6708ed01822702f43d79d362e5 100644 (file)
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -104,6 +104,27 @@
                                        gpios = <&gpio0 6 1>;
                                };
                        };
+
+                       nand@d0000 {
+                               status = "okay";
+                               num-cs = <1>;
+                               marvell,nand-keep-config;
+                               marvell,nand-enable-arbiter;
+                               nand-on-flash-bbt;
+
+                               partition@0 {
+                                       label = "U-Boot";
+                                       reg = <0 0x800000>;
+                               };
+                               partition@800000 {
+                                       label = "Linux";
+                                       reg = <0x800000 0x800000>;
+                               };
+                               partition@1000000 {
+                                       label = "Filesystem";
+                                       reg = <0x1000000 0x3f000000>;
+                               };
+                       };
                };
        };
  };