xhci: cleanup finish_td function

Remove unnecessary else after return, dropping extra indentation depth.
No functional changes.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 06433aec81d71511f0583a1099d42d9977f8da3b..5f609325ec7bbed8d560d7016c1d5a731d02612d 100644 (file)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1813,72 +1813,65 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
        if (skip)
                goto td_cleanup;
 
-       if (trb_comp_code == COMP_STOP_INVAL ||
-                       trb_comp_code == COMP_STOP) {
+       if (trb_comp_code == COMP_STOP_INVAL || trb_comp_code == COMP_STOP) {
                /* The Endpoint Stop Command completion will take care of any
                 * stopped TDs.  A stopped TD may be restarted, so don't update
                 * the ring dequeue pointer or take this TD off any lists yet.
                 */
                ep->stopped_td = td;
                return 0;
+       }
+       if (trb_comp_code == COMP_STALL ||
+               xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+                                               trb_comp_code)) {
+               /* Issue a reset endpoint command to clear the host side
+                * halt, followed by a set dequeue command to move the
+                * dequeue pointer past the TD.
+                * The class driver clears the device side halt later.
+                */
+               xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
+                                       ep_ring->stream_id, td, event_trb);
        } else {
-               if (trb_comp_code == COMP_STALL ||
-                   xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
-                                                     trb_comp_code)) {
-                       /* Issue a reset endpoint command to clear the host side
-                        * halt, followed by a set dequeue command to move the
-                        * dequeue pointer past the TD.
-                        * The class driver clears the device side halt later.
-                        */
-                       xhci_cleanup_halted_endpoint(xhci,
-                                       slot_id, ep_index, ep_ring->stream_id,
-                                       td, event_trb);
-               } else {
-                       /* Update ring dequeue pointer */
-                       while (ep_ring->dequeue != td->last_trb)
-                               inc_deq(xhci, ep_ring);
+               /* Update ring dequeue pointer */
+               while (ep_ring->dequeue != td->last_trb)
                        inc_deq(xhci, ep_ring);
-               }
+               inc_deq(xhci, ep_ring);
+       }
 
 td_cleanup:
-               /* Clean up the endpoint's TD list */
-               urb = td->urb;
-               urb_priv = urb->hcpriv;
-
-               /* Do one last check of the actual transfer length.
-                * If the host controller said we transferred more data than
-                * the buffer length, urb->actual_length will be a very big
-                * number (since it's unsigned).  Play it safe and say we didn't
-                * transfer anything.
-                */
-               if (urb->actual_length > urb->transfer_buffer_length) {
-                       xhci_warn(xhci, "URB transfer length is wrong, "
-                                       "xHC issue? req. len = %u, "
-                                       "act. len = %u\n",
-                                       urb->transfer_buffer_length,
-                                       urb->actual_length);
-                       urb->actual_length = 0;
-                       if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
-                               *status = -EREMOTEIO;
-                       else
-                               *status = 0;
-               }
-               list_del_init(&td->td_list);
-               /* Was this TD slated to be cancelled but completed anyway? */
-               if (!list_empty(&td->cancelled_td_list))
-                       list_del_init(&td->cancelled_td_list);
-
-               urb_priv->td_cnt++;
-               /* Giveback the urb when all the tds are completed */
-               if (urb_priv->td_cnt == urb_priv->length) {
-                       ret = 1;
-                       if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-                               xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
-                               if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs
-                                       == 0) {
-                                       if (xhci->quirks & XHCI_AMD_PLL_FIX)
-                                               usb_amd_quirk_pll_enable();
-                               }
+       /* Clean up the endpoint's TD list */
+       urb = td->urb;
+       urb_priv = urb->hcpriv;
+
+       /* Do one last check of the actual transfer length.
+        * If the host controller said we transferred more data than the buffer
+        * length, urb->actual_length will be a very big number (since it's
+        * unsigned).  Play it safe and say we didn't transfer anything.
+        */
+       if (urb->actual_length > urb->transfer_buffer_length) {
+               xhci_warn(xhci, "URB transfer length is wrong, xHC issue? req. len = %u, act. len = %u\n",
+                       urb->transfer_buffer_length,
+                       urb->actual_length);
+               urb->actual_length = 0;
+               if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+                       *status = -EREMOTEIO;
+               else
+                       *status = 0;
+       }
+       list_del_init(&td->td_list);
+       /* Was this TD slated to be cancelled but completed anyway? */
+       if (!list_empty(&td->cancelled_td_list))
+               list_del_init(&td->cancelled_td_list);
+
+       urb_priv->td_cnt++;
+       /* Giveback the urb when all the tds are completed */
+       if (urb_priv->td_cnt == urb_priv->length) {
+               ret = 1;
+               if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+                       xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
+                       if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
+                               if (xhci->quirks & XHCI_AMD_PLL_FIX)
+                                       usb_amd_quirk_pll_enable();
                        }
                }
        }