.ht_params = &iwl7000_ht_params,
.nvm_ver = IWL7260_NVM_VERSION,
.nvm_calib_ver = IWL7260_TX_POWER_VERSION,
+ .host_interrupt_operation_mode = true,
};
const struct iwl_cfg iwl7260_2ac_cfg_high_temp = {
.nvm_ver = IWL7260_NVM_VERSION,
.nvm_calib_ver = IWL7260_TX_POWER_VERSION,
.high_temp = true,
+ .host_interrupt_operation_mode = true,
};
const struct iwl_cfg iwl7260_2n_cfg = {
.ht_params = &iwl7000_ht_params,
.nvm_ver = IWL7260_NVM_VERSION,
.nvm_calib_ver = IWL7260_TX_POWER_VERSION,
+ .host_interrupt_operation_mode = true,
};
const struct iwl_cfg iwl7260_n_cfg = {
.ht_params = &iwl7000_ht_params,
.nvm_ver = IWL7260_NVM_VERSION,
.nvm_calib_ver = IWL7260_TX_POWER_VERSION,
+ .host_interrupt_operation_mode = true,
};
const struct iwl_cfg iwl3160_2ac_cfg = {
.ht_params = &iwl7000_ht_params,
.nvm_ver = IWL3160_NVM_VERSION,
.nvm_calib_ver = IWL3160_TX_POWER_VERSION,
+ .host_interrupt_operation_mode = true,
};
const struct iwl_cfg iwl3160_2n_cfg = {
.ht_params = &iwl7000_ht_params,
.nvm_ver = IWL3160_NVM_VERSION,
.nvm_calib_ver = IWL3160_TX_POWER_VERSION,
+ .host_interrupt_operation_mode = true,
};
const struct iwl_cfg iwl3160_n_cfg = {
.ht_params = &iwl7000_ht_params,
.nvm_ver = IWL3160_NVM_VERSION,
.nvm_calib_ver = IWL3160_TX_POWER_VERSION,
+ .host_interrupt_operation_mode = true,
};
const struct iwl_cfg iwl7265_2ac_cfg = {
* @rx_with_siso_diversity: 1x1 device with rx antenna diversity
* @internal_wimax_coex: internal wifi/wimax combo device
* @high_temp: Is this NIC is designated to be in high temperature.
+ * @host_interrupt_operation_mode: device needs host interrupt operation
+ * mode set
*
* We enable the driver to be backward compatible wrt. hardware features.
* API differences in uCode shouldn't be handled here but through TLVs
enum iwl_led_mode led_mode;
const bool rx_with_siso_diversity;
const bool internal_wimax_coex;
+ const bool host_interrupt_operation_mode;
bool high_temp;
};
* the CSR_INT_COALESCING is an 8 bit register in 32-usec unit
*
* default interrupt coalescing timer is 64 x 32 = 2048 usecs
- * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs
*/
#define IWL_HOST_INT_TIMEOUT_MAX (0xFF)
#define IWL_HOST_INT_TIMEOUT_DEF (0x40)
#define IWL_HOST_INT_TIMEOUT_MIN (0x0)
-#define IWL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF)
-#define IWL_HOST_INT_CALIB_TIMEOUT_DEF (0x10)
-#define IWL_HOST_INT_CALIB_TIMEOUT_MIN (0x0)
+#define IWL_HOST_INT_OPER_MODE BIT(31)
/*****************************************************************************
* 7000/3000 series SHR DTS addresses *