x86_64: apic.c coding style janitor work
authorThomas Gleixner <tglx@linutronix.de>
Sat, 21 Jul 2007 15:10:17 +0000 (17:10 +0200)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Sun, 22 Jul 2007 01:37:09 +0000 (18:37 -0700)
Fix coding style, white space wreckage and remove unused code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/x86_64/kernel/apic.c

index 4ba5a693c011207b1ae62a65745890df0b05c1e9..900ff38d68de5418d2fe6b6d34937da43035050a 100644 (file)
@@ -92,8 +92,9 @@ unsigned int safe_apic_wait_icr_idle(void)
 void enable_NMI_through_LVT0 (void * dummy)
 {
        unsigned int v;
-       
-       v = APIC_DM_NMI;                        /* unmask and set to NMI */
+
+       /* unmask and set to NMI */
+       v = APIC_DM_NMI;
        apic_write(APIC_LVT0, v);
 }
 
@@ -120,7 +121,7 @@ void ack_bad_irq(unsigned int irq)
         * holds up an irq slot - in excessive cases (when multiple
         * unexpected vectors occur) that might lock up the APIC
         * completely.
-        * But don't ack when the APIC is disabled. -AK
+        * But don't ack when the APIC is disabled. -AK
         */
        if (!disable_apic)
                ack_APIC_irq();
@@ -616,7 +617,7 @@ early_param("apic", apic_set_verbosity);
  * Detect and enable local APICs on non-SMP boards.
  * Original code written by Keir Fraser.
  * On AMD64 we trust the BIOS - if it says no APIC it is likely
- * not correctly set up (usually the APIC timer won't work etc.) 
+ * not correctly set up (usually the APIC timer won't work etc.)
  */
 
 static int __init detect_init_APIC (void)
@@ -789,13 +790,13 @@ static void setup_APIC_timer(unsigned int clocks)
        local_irq_save(flags);
 
        /* wait for irq slice */
-       if (hpet_address && hpet_use_timer) {
-               int trigger = hpet_readl(HPET_T0_CMP);
-               while (hpet_readl(HPET_COUNTER) >= trigger)
-                       /* do nothing */ ;
-               while (hpet_readl(HPET_COUNTER) <  trigger)
-                       /* do nothing */ ;
-       } else {
+       if (hpet_address && hpet_use_timer) {
+               int trigger = hpet_readl(HPET_T0_CMP);
+               while (hpet_readl(HPET_COUNTER) >= trigger)
+                       /* do nothing */ ;
+               while (hpet_readl(HPET_COUNTER) <  trigger)
+                       /* do nothing */ ;
+       } else {
                int c1, c2;
                outb_p(0x00, 0x43);
                c2 = inb_p(0x40);
@@ -881,10 +882,10 @@ static unsigned int calibration_result;
 
 void __init setup_boot_APIC_clock (void)
 {
-       if (disable_apic_timer) { 
-               printk(KERN_INFO "Disabling APIC timer\n"); 
-               return; 
-       } 
+       if (disable_apic_timer) {
+               printk(KERN_INFO "Disabling APIC timer\n");
+               return;
+       }
 
        printk(KERN_INFO "Using local APIC timer interrupts.\n");
        using_apic_timer = 1;
@@ -1128,20 +1129,6 @@ asmlinkage void smp_spurious_interrupt(void)
        if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
                ack_APIC_irq();
 
-#if 0
-       static unsigned long last_warning; 
-       static unsigned long skipped; 
-
-       /* see sw-dev-man vol 3, chapter 7.4.13.5 */
-       if (time_before(last_warning+30*HZ,jiffies)) { 
-               printk(KERN_INFO "spurious APIC interrupt on CPU#%d, %ld skipped.\n",
-                      smp_processor_id(), skipped);
-               last_warning = jiffies; 
-               skipped = 0;
-       } else { 
-               skipped++; 
-       } 
-#endif 
        irq_exit();
 }
 
@@ -1173,11 +1160,11 @@ asmlinkage void smp_error_interrupt(void)
           7: Illegal register address
        */
        printk (KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n",
-               smp_processor_id(), v , v1);
+               smp_processor_id(), v , v1);
        irq_exit();
 }
 
-int disable_apic; 
+int disable_apic;
 
 /*
  * This initializes the IO-APIC and APIC hardware if this is
@@ -1185,11 +1172,11 @@ int disable_apic;
  */
 int __init APIC_init_uniprocessor (void)
 {
-       if (disable_apic) { 
+       if (disable_apic) {
                printk(KERN_INFO "Apic disabled\n");
-               return -1; 
+               return -1;
        }
-       if (!cpu_has_apic) { 
+       if (!cpu_has_apic) {
                disable_apic = 1;
                printk(KERN_INFO "Apic disabled by BIOS\n");
                return -1;
@@ -1211,8 +1198,8 @@ int __init APIC_init_uniprocessor (void)
        return 0;
 }
 
-static __init int setup_disableapic(char *str) 
-{ 
+static __init int setup_disableapic(char *str)
+{
        disable_apic = 1;
        clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
        return 0;
@@ -1220,10 +1207,10 @@ static __init int setup_disableapic(char *str)
 early_param("disableapic", setup_disableapic);
 
 /* same as disableapic, for compatibility */
-static __init int setup_nolapic(char *str) 
-{ 
+static __init int setup_nolapic(char *str)
+{
        return setup_disableapic(str);
-} 
+}
 early_param("nolapic", setup_nolapic);
 
 static int __init parse_lapic_timer_c2_ok(char *arg)
@@ -1233,13 +1220,13 @@ static int __init parse_lapic_timer_c2_ok(char *arg)
 }
 early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
 
-static __init int setup_noapictimer(char *str) 
-{ 
+static __init int setup_noapictimer(char *str)
+{
        if (str[0] != ' ' && str[0] != 0)
                return 0;
        disable_apic_timer = 1;
        return 1;
-} 
+}
 
 static __init int setup_apicmaintimer(char *str)
 {
@@ -1264,5 +1251,5 @@ static __init int setup_apicpmtimer(char *s)
 }
 __setup("apicpmtimer", setup_apicpmtimer);
 
-__setup("noapictimer", setup_noapictimer); 
+__setup("noapictimer", setup_noapictimer);