doc: Fix numbering of KVM API description sections

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index ad85797c1cf04b95fd87bfccef458bdcb937d5c0..9bef4e4cec50d0b135c9bcb88320a0cf463a4965 100644 (file)
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -166,7 +166,7 @@ Returns: 0 on success, -1 on error
 
 This ioctl is obsolete and has been removed.
 
-4.6 KVM_CREATE_VCPU
+4.7 KVM_CREATE_VCPU
 
 Capability: basic
 Architectures: all
@@ -177,7 +177,7 @@ Returns: vcpu fd on success, -1 on error
 This API adds a vcpu to a virtual machine.  The vcpu id is a small integer
 in the range [0, max_vcpus).
 
-4.7 KVM_GET_DIRTY_LOG (vm ioctl)
+4.8 KVM_GET_DIRTY_LOG (vm ioctl)
 
 Capability: basic
 Architectures: x86
@@ -200,7 +200,7 @@ since the last call to this ioctl.  Bit 0 is the first page in the
 memory slot.  Ensure the entire structure is cleared to avoid padding
 issues.
 
-4.8 KVM_SET_MEMORY_ALIAS
+4.9 KVM_SET_MEMORY_ALIAS
 
 Capability: basic
 Architectures: x86
@@ -210,7 +210,7 @@ Returns: 0 (success), -1 (error)
 
 This ioctl is obsolete and has been removed.
 
-4.9 KVM_RUN
+4.10 KVM_RUN
 
 Capability: basic
 Architectures: all
@@ -226,7 +226,7 @@ obtained by mmap()ing the vcpu fd at offset 0, with the size given by
 KVM_GET_VCPU_MMAP_SIZE.  The parameter block is formatted as a 'struct
 kvm_run' (see below).
 
-4.10 KVM_GET_REGS
+4.11 KVM_GET_REGS
 
 Capability: basic
 Architectures: all
@@ -246,7 +246,7 @@ struct kvm_regs {
        __u64 rip, rflags;
 };
 
-4.11 KVM_SET_REGS
+4.12 KVM_SET_REGS
 
 Capability: basic
 Architectures: all
@@ -258,7 +258,7 @@ Writes the general purpose registers into the vcpu.
 
 See KVM_GET_REGS for the data structure.
 
-4.12 KVM_GET_SREGS
+4.13 KVM_GET_SREGS
 
 Capability: basic
 Architectures: x86
@@ -283,7 +283,7 @@ interrupt_bitmap is a bitmap of pending external interrupts.  At most
 one bit may be set.  This interrupt has been acknowledged by the APIC
 but not yet injected into the cpu core.
 
-4.13 KVM_SET_SREGS
+4.14 KVM_SET_SREGS
 
 Capability: basic
 Architectures: x86
@@ -294,7 +294,7 @@ Returns: 0 on success, -1 on error
 Writes special registers into the vcpu.  See KVM_GET_SREGS for the
 data structures.
 
-4.14 KVM_TRANSLATE
+4.15 KVM_TRANSLATE
 
 Capability: basic
 Architectures: x86
@@ -317,7 +317,7 @@ struct kvm_translation {
        __u8  pad[5];
 };
 
-4.15 KVM_INTERRUPT
+4.16 KVM_INTERRUPT
 
 Capability: basic
 Architectures: x86, ppc
@@ -365,7 +365,7 @@ c) KVM_INTERRUPT_SET_LEVEL
 Note that any value for 'irq' other than the ones stated above is invalid
 and incurs unexpected behavior.
 
-4.16 KVM_DEBUG_GUEST
+4.17 KVM_DEBUG_GUEST
 
 Capability: basic
 Architectures: none
@@ -375,7 +375,7 @@ Returns: -1 on error
 
 Support for this has been removed.  Use KVM_SET_GUEST_DEBUG instead.
 
-4.17 KVM_GET_MSRS
+4.18 KVM_GET_MSRS
 
 Capability: basic
 Architectures: x86
@@ -403,7 +403,7 @@ Application code should set the 'nmsrs' member (which indicates the
 size of the entries array) and the 'index' member of each array entry.
 kvm will fill in the 'data' member.
 
-4.18 KVM_SET_MSRS
+4.19 KVM_SET_MSRS
 
 Capability: basic
 Architectures: x86
@@ -418,7 +418,7 @@ Application code should set the 'nmsrs' member (which indicates the
 size of the entries array), and the 'index' and 'data' members of each
 array entry.
 
-4.19 KVM_SET_CPUID
+4.20 KVM_SET_CPUID
 
 Capability: basic
 Architectures: x86
@@ -446,7 +446,7 @@ struct kvm_cpuid {
        struct kvm_cpuid_entry entries[0];
 };
 
-4.20 KVM_SET_SIGNAL_MASK
+4.21 KVM_SET_SIGNAL_MASK
 
 Capability: basic
 Architectures: x86
@@ -468,7 +468,7 @@ struct kvm_signal_mask {
        __u8  sigset[0];
 };
 
-4.21 KVM_GET_FPU
+4.22 KVM_GET_FPU
 
 Capability: basic
 Architectures: x86
@@ -493,7 +493,7 @@ struct kvm_fpu {
        __u32 pad2;
 };
 
-4.22 KVM_SET_FPU
+4.23 KVM_SET_FPU
 
 Capability: basic
 Architectures: x86
@@ -518,7 +518,7 @@ struct kvm_fpu {
        __u32 pad2;
 };
 
-4.23 KVM_CREATE_IRQCHIP
+4.24 KVM_CREATE_IRQCHIP
 
 Capability: KVM_CAP_IRQCHIP
 Architectures: x86, ia64
@@ -531,7 +531,7 @@ ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
 local APIC.  IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
 only go to the IOAPIC.  On ia64, a IOSAPIC is created.
 
-4.24 KVM_IRQ_LINE
+4.25 KVM_IRQ_LINE
 
 Capability: KVM_CAP_IRQCHIP
 Architectures: x86, ia64
@@ -552,7 +552,7 @@ struct kvm_irq_level {
        __u32 level;           /* 0 or 1 */
 };
 
-4.25 KVM_GET_IRQCHIP
+4.26 KVM_GET_IRQCHIP
 
 Capability: KVM_CAP_IRQCHIP
 Architectures: x86, ia64
@@ -573,7 +573,7 @@ struct kvm_irqchip {
        } chip;
 };
 
-4.26 KVM_SET_IRQCHIP
+4.27 KVM_SET_IRQCHIP
 
 Capability: KVM_CAP_IRQCHIP
 Architectures: x86, ia64
@@ -594,7 +594,7 @@ struct kvm_irqchip {
        } chip;
 };
 
-4.27 KVM_XEN_HVM_CONFIG
+4.28 KVM_XEN_HVM_CONFIG
 
 Capability: KVM_CAP_XEN_HVM
 Architectures: x86
@@ -618,7 +618,7 @@ struct kvm_xen_hvm_config {
        __u8 pad2[30];
 };
 
-4.27 KVM_GET_CLOCK
+4.29 KVM_GET_CLOCK
 
 Capability: KVM_CAP_ADJUST_CLOCK
 Architectures: x86
@@ -636,7 +636,7 @@ struct kvm_clock_data {
        __u32 pad[9];
 };
 
-4.28 KVM_SET_CLOCK
+4.30 KVM_SET_CLOCK
 
 Capability: KVM_CAP_ADJUST_CLOCK
 Architectures: x86
@@ -654,7 +654,7 @@ struct kvm_clock_data {
        __u32 pad[9];
 };
 
-4.29 KVM_GET_VCPU_EVENTS
+4.31 KVM_GET_VCPU_EVENTS
 
 Capability: KVM_CAP_VCPU_EVENTS
 Extended by: KVM_CAP_INTR_SHADOW
@@ -693,7 +693,7 @@ struct kvm_vcpu_events {
 KVM_VCPUEVENT_VALID_SHADOW may be set in the flags field to signal that
 interrupt.shadow contains a valid state. Otherwise, this field is undefined.
 
-4.30 KVM_SET_VCPU_EVENTS
+4.32 KVM_SET_VCPU_EVENTS
 
 Capability: KVM_CAP_VCPU_EVENTS
 Extended by: KVM_CAP_INTR_SHADOW
@@ -719,7 +719,7 @@ If KVM_CAP_INTR_SHADOW is available, KVM_VCPUEVENT_VALID_SHADOW can be set in
 the flags field to signal that interrupt.shadow contains a valid state and
 shall be written into the VCPU.
 
-4.32 KVM_GET_DEBUGREGS
+4.33 KVM_GET_DEBUGREGS
 
 Capability: KVM_CAP_DEBUGREGS
 Architectures: x86
@@ -737,7 +737,7 @@ struct kvm_debugregs {
        __u64 reserved[9];
 };
 
-4.33 KVM_SET_DEBUGREGS
+4.34 KVM_SET_DEBUGREGS
 
 Capability: KVM_CAP_DEBUGREGS
 Architectures: x86
@@ -750,7 +750,7 @@ Writes debug registers into the vcpu.
 See KVM_GET_DEBUGREGS for the data structure. The flags field is unused
 yet and must be cleared on entry.
 
-4.34 KVM_SET_USER_MEMORY_REGION
+4.35 KVM_SET_USER_MEMORY_REGION
 
 Capability: KVM_CAP_USER_MEM
 Architectures: all
@@ -796,7 +796,7 @@ It is recommended to use this API instead of the KVM_SET_MEMORY_REGION ioctl.
 The KVM_SET_MEMORY_REGION does not allow fine grained control over memory
 allocation and is deprecated.
 
-4.35 KVM_SET_TSS_ADDR
+4.36 KVM_SET_TSS_ADDR
 
 Capability: KVM_CAP_SET_TSS_ADDR
 Architectures: x86
@@ -814,7 +814,7 @@ This ioctl is required on Intel-based hosts.  This is needed on Intel hardware
 because of a quirk in the virtualization implementation (see the internals
 documentation when it pops into existence).
 
-4.36 KVM_ENABLE_CAP
+4.37 KVM_ENABLE_CAP
 
 Capability: KVM_CAP_ENABLE_CAP
 Architectures: ppc
@@ -849,7 +849,7 @@ function properly, this is the place to put them.
        __u8  pad[64];
 };
 
-4.37 KVM_GET_MP_STATE
+4.38 KVM_GET_MP_STATE
 
 Capability: KVM_CAP_MP_STATE
 Architectures: x86, ia64
@@ -879,7 +879,7 @@ Possible values are:
 This ioctl is only useful after KVM_CREATE_IRQCHIP.  Without an in-kernel
 irqchip, the multiprocessing state must be maintained by userspace.
 
-4.38 KVM_SET_MP_STATE
+4.39 KVM_SET_MP_STATE
 
 Capability: KVM_CAP_MP_STATE
 Architectures: x86, ia64
@@ -893,7 +893,7 @@ arguments.
 This ioctl is only useful after KVM_CREATE_IRQCHIP.  Without an in-kernel
 irqchip, the multiprocessing state must be maintained by userspace.
 
-4.39 KVM_SET_IDENTITY_MAP_ADDR
+4.40 KVM_SET_IDENTITY_MAP_ADDR
 
 Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR
 Architectures: x86
@@ -911,7 +911,7 @@ This ioctl is required on Intel-based hosts.  This is needed on Intel hardware
 because of a quirk in the virtualization implementation (see the internals
 documentation when it pops into existence).
 
-4.40 KVM_SET_BOOT_CPU_ID
+4.41 KVM_SET_BOOT_CPU_ID
 
 Capability: KVM_CAP_SET_BOOT_CPU_ID
 Architectures: x86, ia64
@@ -923,7 +923,7 @@ Define which vcpu is the Bootstrap Processor (BSP).  Values are the same
 as the vcpu id in KVM_CREATE_VCPU.  If this ioctl is not called, the default
 is vcpu 0.
 
-4.41 KVM_GET_XSAVE
+4.42 KVM_GET_XSAVE
 
 Capability: KVM_CAP_XSAVE
 Architectures: x86
@@ -937,7 +937,7 @@ struct kvm_xsave {
 
 This ioctl would copy current vcpu's xsave struct to the userspace.
 
-4.42 KVM_SET_XSAVE
+4.43 KVM_SET_XSAVE
 
 Capability: KVM_CAP_XSAVE
 Architectures: x86
@@ -951,7 +951,7 @@ struct kvm_xsave {
 
 This ioctl would copy userspace's xsave struct to the kernel.
 
-4.43 KVM_GET_XCRS
+4.44 KVM_GET_XCRS
 
 Capability: KVM_CAP_XCRS
 Architectures: x86
@@ -974,7 +974,7 @@ struct kvm_xcrs {
 
 This ioctl would copy current vcpu's xcrs to the userspace.
 
-4.44 KVM_SET_XCRS
+4.45 KVM_SET_XCRS
 
 Capability: KVM_CAP_XCRS
 Architectures: x86
@@ -997,7 +997,7 @@ struct kvm_xcrs {
 
 This ioctl would set vcpu's xcr to the value userspace specified.
 
-4.45 KVM_GET_SUPPORTED_CPUID
+4.46 KVM_GET_SUPPORTED_CPUID
 
 Capability: KVM_CAP_EXT_CPUID
 Architectures: x86
@@ -1062,7 +1062,7 @@ emulate them efficiently. The fields in each entry are defined as follows:
    eax, ebx, ecx, edx: the values returned by the cpuid instruction for
          this function/index combination
 
-4.46 KVM_PPC_GET_PVINFO
+4.47 KVM_PPC_GET_PVINFO
 
 Capability: KVM_CAP_PPC_GET_PVINFO
 Architectures: ppc
@@ -1085,7 +1085,7 @@ of 4 instructions that make up a hypercall.
 If any additional field gets added to this structure later on, a bit for that
 additional piece of information will be set in the flags bitmap.
 
-4.47 KVM_ASSIGN_PCI_DEVICE
+4.48 KVM_ASSIGN_PCI_DEVICE
 
 Capability: KVM_CAP_DEVICE_ASSIGNMENT
 Architectures: x86 ia64
@@ -1113,7 +1113,7 @@ following flags are specified:
 /* Depends on KVM_CAP_IOMMU */
 #define KVM_DEV_ASSIGN_ENABLE_IOMMU    (1 << 0)
 
-4.48 KVM_DEASSIGN_PCI_DEVICE
+4.49 KVM_DEASSIGN_PCI_DEVICE
 
 Capability: KVM_CAP_DEVICE_DEASSIGNMENT
 Architectures: x86 ia64
@@ -1126,7 +1126,7 @@ Ends PCI device assignment, releasing all associated resources.
 See KVM_CAP_DEVICE_ASSIGNMENT for the data structure. Only assigned_dev_id is
 used in kvm_assigned_pci_dev to identify the device.
 
-4.49 KVM_ASSIGN_DEV_IRQ
+4.50 KVM_ASSIGN_DEV_IRQ
 
 Capability: KVM_CAP_ASSIGN_DEV_IRQ
 Architectures: x86 ia64
@@ -1164,7 +1164,7 @@ The following flags are defined:
 It is not valid to specify multiple types per host or guest IRQ. However, the
 IRQ type of host and guest can differ or can even be null.
 
-4.50 KVM_DEASSIGN_DEV_IRQ
+4.51 KVM_DEASSIGN_DEV_IRQ
 
 Capability: KVM_CAP_ASSIGN_DEV_IRQ
 Architectures: x86 ia64
@@ -1178,7 +1178,7 @@ See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
 by assigned_dev_id, flags must correspond to the IRQ type specified on
 KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
 
-4.51 KVM_SET_GSI_ROUTING
+4.52 KVM_SET_GSI_ROUTING
 
 Capability: KVM_CAP_IRQ_ROUTING
 Architectures: x86 ia64
@@ -1226,7 +1226,7 @@ struct kvm_irq_routing_msi {
        __u32 pad;
 };
 
-4.52 KVM_ASSIGN_SET_MSIX_NR
+4.53 KVM_ASSIGN_SET_MSIX_NR
 
 Capability: KVM_CAP_DEVICE_MSIX
 Architectures: x86 ia64
@@ -1245,7 +1245,7 @@ struct kvm_assigned_msix_nr {
 
 #define KVM_MAX_MSIX_PER_DEV           256
 
-4.53 KVM_ASSIGN_SET_MSIX_ENTRY
+4.54 KVM_ASSIGN_SET_MSIX_ENTRY
 
 Capability: KVM_CAP_DEVICE_MSIX
 Architectures: x86 ia64