--- /dev/null
+/**
+ * Driver for Zarlink zl10036 DVB-S silicon tuner
+ *
+ * Copyright (C) 2006 Tino Reichardt
+ * Copyright (C) 2007-2009 Matthias Schwarzott <zzam@gentoo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ **
+ * The data sheet for this tuner can be found at:
+ * http://www.mcmilk.de/projects/dvb-card/datasheets/ZL10036.pdf
+ *
+ * This one is working: (at my Avermedia DVB-S Pro)
+ * - zl10036 (40pin, FTA)
+ *
+ * A driver for zl10038 should be very similar.
+ */
+
+#include <linux/module.h>
+#include <linux/dvb/frontend.h>
+#include <asm/types.h>
+
+#include "zl10036.h"
+
+static int zl10036_debug;
+#define dprintk(level, args...) \
+ do { if (zl10036_debug & level) printk(KERN_DEBUG "zl10036: " args); \
+ } while (0)
+
+#define deb_info(args...) dprintk(0x01, args)
+#define deb_i2c(args...) dprintk(0x02, args)
+
+struct zl10036_state {
+ struct i2c_adapter *i2c;
+ const struct zl10036_config *config;
+ u32 frequency;
+ u8 br, bf;
+};
+
+
+/* This driver assumes the tuner is driven by a 10.111MHz Cristal */
+#define _XTAL 10111
+
+/* Some of the possible dividers:
+ * 64, (write 0x05 to reg), freq step size 158kHz
+ * 10, (write 0x0a to reg), freq step size 1.011kHz (used here)
+ * 5, (write 0x09 to reg), freq step size 2.022kHz
+ */
+
+#define _RDIV 10
+#define _RDIV_REG 0x0a
+#define _FR (_XTAL/_RDIV)
+
+#define STATUS_POR 0x80 /* Power on Reset */
+#define STATUS_FL 0x40 /* Frequency & Phase Lock */
+
+/* read/write for zl10036 and zl10038 */
+
+static int zl10036_read_status_reg(struct zl10036_state *state)
+{
+ u8 status;
+ struct i2c_msg msg[1] = {
+ { .addr = state->config->tuner_address, .flags = I2C_M_RD,
+ .buf = &status, .len = sizeof(status) },
+ };
+
+ if (i2c_transfer(state->i2c, msg, 1) != 1) {
+ printk(KERN_ERR "%s: i2c read failed at addr=%02x\n",
+ __func__, state->config->tuner_address);
+ return -EIO;
+ }
+
+ deb_i2c("R(status): %02x [FL=%d]\n", status,
+ (status & STATUS_FL) ? 1 : 0);
+ if (status & STATUS_POR)
+ deb_info("%s: Power-On-Reset bit enabled - "
+ "need to initialize the tuner\n", __func__);
+
+ return status;
+}
+
+static int zl10036_write(struct zl10036_state *state, u8 buf[], u8 count)
+{
+ struct i2c_msg msg[1] = {
+ { .addr = state->config->tuner_address, .flags = 0,
+ .buf = buf, .len = count },
+ };
+ u8 reg = 0;
+ int ret;
+
+ if (zl10036_debug & 0x02) {
+ /* every 8bit-value satisifes this!
+ * so only check for debug log */
+ if ((buf[0] & 0x80) == 0x00)
+ reg = 2;
+ else if ((buf[0] & 0xc0) == 0x80)
+ reg = 4;
+ else if ((buf[0] & 0xf0) == 0xc0)
+ reg = 6;
+ else if ((buf[0] & 0xf0) == 0xd0)
+ reg = 8;
+ else if ((buf[0] & 0xf0) == 0xe0)
+ reg = 10;
+ else if ((buf[0] & 0xf0) == 0xf0)
+ reg = 12;
+
+ deb_i2c("W(%d):", reg);
+ {
+ int i;
+ for (i = 0; i < count; i++)
+ printk(KERN_CONT " %02x", buf[i]);
+ printk(KERN_CONT "\n");
+ }
+ }
+
+ ret = i2c_transfer(state->i2c, msg, 1);
+ if (ret != 1) {
+ printk(KERN_ERR "%s: i2c error, ret=%d\n", __func__, ret);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int zl10036_release(struct dvb_frontend *fe)
+{
+ struct zl10036_state *state = fe->tuner_priv;
+
+ fe->tuner_priv = NULL;
+ kfree(state);
+
+ return 0;
+}
+
+static int zl10036_sleep(struct dvb_frontend *fe)
+{
+ struct zl10036_state *state = fe->tuner_priv;
+ u8 buf[] = { 0xf0, 0x80 }; /* regs 12/13 */
+ int ret;
+
+ deb_info("%s\n", __func__);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+ ret = zl10036_write(state, buf, sizeof(buf));
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+ return ret;
+}
+
+/**
+ * register map of the ZL10036/ZL10038
+ *
+ * reg[default] content
+ * 2[0x00]: 0 | N14 | N13 | N12 | N11 | N10 | N9 | N8
+ * 3[0x00]: N7 | N6 | N5 | N4 | N3 | N2 | N1 | N0
+ * 4[0x80]: 1 | 0 | RFG | BA1 | BA0 | BG1 | BG0 | LEN
+ * 5[0x00]: P0 | C1 | C0 | R4 | R3 | R2 | R1 | R0
+ * 6[0xc0]: 1 | 1 | 0 | 0 | RSD | 0 | 0 | 0
+ * 7[0x20]: P1 | BF6 | BF5 | BF4 | BF3 | BF2 | BF1 | 0
+ * 8[0xdb]: 1 | 1 | 0 | 1 | 0 | CC | 1 | 1
+ * 9[0x30]: VSD | V2 | V1 | V0 | S3 | S2 | S1 | S0
+ * 10[0xe1]: 1 | 1 | 1 | 0 | 0 | LS2 | LS1 | LS0
+ * 11[0xf5]: WS | WH2 | WH1 | WH0 | WL2 | WL1 | WL0 | WRE
+ * 12[0xf0]: 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0
+ * 13[0x28]: PD | BR4 | BR3 | BR2 | BR1 | BR0 | CLR | TL
+ */
+
+static int zl10036_set_frequency(struct zl10036_state *state, u32 frequency)
+{
+ u8 buf[2];
+ u32 div, foffset;
+
+ div = (frequency + _FR/2) / _FR;
+ state->frequency = div * _FR;
+
+ foffset = frequency - state->frequency;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = (div >> 0) & 0xff;
+
+ deb_info("%s: ftodo=%u fpriv=%u ferr=%d div=%u\n", __func__,
+ frequency, state->frequency, foffset, div);
+
+ return zl10036_write(state, buf, sizeof(buf));
+}
+
+static int zl10036_set_bandwidth(struct zl10036_state *state, u32 fbw)
+{
+ /* fbw is measured in kHz */
+ u8 br, bf;
+ int ret;
+ u8 buf_bf[] = {
+ 0xc0, 0x00, /* 6/7: rsd=0 bf=0 */
+ };
+ u8 buf_br[] = {
+ 0xf0, 0x00, /* 12/13: br=0xa clr=0 tl=0*/
+ };
+ u8 zl10036_rsd_off[] = { 0xc8 }; /* set RSD=1 */
+
+ /* ensure correct values */
+ if (fbw > 35000)
+ fbw = 35000;
+ if (fbw < 8000)
+ fbw = 8000;
+
+#define _BR_MAXIMUM (_XTAL/575) /* _XTAL / 575kHz = 17 */
+
+ /* <= 28,82 MHz */
+ if (fbw <= 28820) {
+ br = _BR_MAXIMUM;
+ } else {
+ /**
+ * f(bw)=34,6MHz f(xtal)=10.111MHz
+ * br = (10111/34600) * 63 * 1/K = 14;
+ */
+ br = ((_XTAL * 21 * 1000) / (fbw * 419));
+ }
+
+ /* ensure correct values */
+ if (br < 4)
+ br = 4;
+ if (br > _BR_MAXIMUM)
+ br = _BR_MAXIMUM;
+
+ /*
+ * k = 1.257
+ * bf = fbw/_XTAL * br * k - 1 */
+
+ bf = (fbw * br * 1257) / (_XTAL * 1000) - 1;
+
+ /* ensure correct values */
+ if (bf > 62)
+ bf = 62;
+
+ buf_bf[1] = (bf << 1) & 0x7e;
+ buf_br[1] = (br << 2) & 0x7c;
+ deb_info("%s: BW=%d br=%u bf=%u\n", __func__, fbw, br, bf);
+
+ if (br != state->br) {
+ ret = zl10036_write(state, buf_br, sizeof(buf_br));
+ if (ret < 0)
+ return ret;
+ }
+
+ if (bf != state->bf) {
+ ret = zl10036_write(state, buf_bf, sizeof(buf_bf));
+ if (ret < 0)
+ return ret;
+
+ /* time = br/(32* fxtal) */
+ /* minimal sleep time to be calculated
+ * maximum br is 63 -> max time = 2 /10 MHz = 2e-7 */
+ msleep(1);
+
+ ret = zl10036_write(state, zl10036_rsd_off,
+ sizeof(zl10036_rsd_off));
+ if (ret < 0)
+ return ret;
+ }
+
+ state->br = br;
+ state->bf = bf;
+
+ return 0;
+}
+
+static int zl10036_set_gain_params(struct zl10036_state *state,
+ int c)
+{
+ u8 buf[2];
+ u8 rfg, ba, bg;
+
+ /* default values */
+ rfg = 0; /* enable when using an lna */
+ ba = 1;
+ bg = 1;
+
+ /* reg 4 */
+ buf[0] = 0x80 | ((rfg << 5) & 0x20)
+ | ((ba << 3) & 0x18) | ((bg << 1) & 0x06);
+
+ if (!state->config->rf_loop_enable)
+ buf[0] |= 0x01;
+
+ /* P0=0 */
+ buf[1] = _RDIV_REG | ((c << 5) & 0x60);
+
+ deb_info("%s: c=%u rfg=%u ba=%u bg=%u\n", __func__, c, rfg, ba, bg);
+ return zl10036_write(state, buf, sizeof(buf));
+}
+
+static int zl10036_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct zl10036_state *state = fe->tuner_priv;
+ int ret = 0;
+ u32 frequency = params->frequency;
+ u32 fbw;
+ int i;
+ u8 c;
+
+ /* ensure correct values
+ * maybe redundant as core already checks this */
+ if ((frequency < fe->ops.info.frequency_min)
+ || (frequency > fe->ops.info.frequency_max))
+ return -EINVAL;
+
+ /**
+ * alpha = 1.35 for dvb-s
+ * fBW = (alpha*symbolrate)/(2*0.8)
+ * 1.35 / (2*0.8) = 27 / 32
+ */
+ fbw = (27 * params->u.qpsk.symbol_rate) / 32;
+
+ /* scale to kHz */
+ fbw /= 1000;
+
+ /* Add safe margin of 3MHz */
+ fbw += 3000;
+
+ /* setting the charge pump - guessed values */
+ if (frequency < 950000)
+ return -EINVAL;
+ else if (frequency < 1250000)
+ c = 0;
+ else if (frequency < 1750000)
+ c = 1;
+ else if (frequency < 2175000)
+ c = 2;
+ else
+ return -EINVAL;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+ ret = zl10036_set_gain_params(state, c);
+ if (ret < 0)
+ goto error;
+
+ ret = zl10036_set_frequency(state, params->frequency);
+ if (ret < 0)
+ goto error;
+
+ ret = zl10036_set_bandwidth(state, fbw);
+ if (ret < 0)
+ goto error;
+
+ /* wait for tuner lock - no idea if this is really needed */
+ for (i = 0; i < 20; i++) {
+ ret = zl10036_read_status_reg(state);
+ if (ret < 0)
+ goto error;
+
+ /* check Frequency & Phase Lock Bit */
+ if (ret & STATUS_FL)
+ break;
+
+ msleep(10);
+ }
+
+error:
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+ return ret;
+}
+
+static int zl10036_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct zl10036_state *state = fe->tuner_priv;
+
+ *frequency = state->frequency;
+
+ return 0;
+}
+
+static int zl10036_init_regs(struct zl10036_state *state)
+{
+ int ret;
+ int i;
+
+ /* could also be one block from reg 2 to 13 and additional 10/11 */
+ u8 zl10036_init_tab[][2] = {
+ { 0x04, 0x00 }, /* 2/3: div=0x400 - arbitrary value */
+ { 0x8b, _RDIV_REG }, /* 4/5: rfg=0 ba=1 bg=1 len=? */
+ /* p0=0 c=0 r=_RDIV_REG */
+ { 0xc0, 0x20 }, /* 6/7: rsd=0 bf=0x10 */
+ { 0xd3, 0x40 }, /* 8/9: from datasheet */
+ { 0xe3, 0x5b }, /* 10/11: lock window level */
+ { 0xf0, 0x28 }, /* 12/13: br=0xa clr=0 tl=0*/
+ { 0xe3, 0xf9 }, /* 10/11: unlock window level */
+ };
+
+ /* invalid values to trigger writing */
+ state->br = 0xff;
+ state->bf = 0xff;
+
+ if (!state->config->rf_loop_enable)
+ zl10036_init_tab[1][2] |= 0x01;
+
+ deb_info("%s\n", __func__);
+
+ for (i = 0; i < ARRAY_SIZE(zl10036_init_tab); i++) {
+ ret = zl10036_write(state, zl10036_init_tab[i], 2);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int zl10036_init(struct dvb_frontend *fe)
+{
+ struct zl10036_state *state = fe->tuner_priv;
+ int ret = 0;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+ ret = zl10036_read_status_reg(state);
+ if (ret < 0)
+ return ret;
+
+ /* Only init if Power-on-Reset bit is set? */
+ ret = zl10036_init_regs(state);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+ return ret;
+}
+
+static struct dvb_tuner_ops zl10036_tuner_ops = {
+ .info = {
+ .name = "Zarlink ZL10036",
+ .frequency_min = 950000,
+ .frequency_max = 2175000
+ },
+ .init = zl10036_init,
+ .release = zl10036_release,
+ .sleep = zl10036_sleep,
+ .set_params = zl10036_set_params,
+ .get_frequency = zl10036_get_frequency,
+};
+
+struct dvb_frontend *zl10036_attach(struct dvb_frontend *fe,
+ const struct zl10036_config *config,
+ struct i2c_adapter *i2c)
+{
+ struct zl10036_state *state = NULL;
+ int ret;
+
+ if (NULL == config) {
+ printk(KERN_ERR "%s: no config specified", __func__);
+ goto error;
+ }
+
+ state = kzalloc(sizeof(struct zl10036_state), GFP_KERNEL);
+ if (NULL == state)
+ return NULL;
+
+ state->config = config;
+ state->i2c = i2c;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+ ret = zl10036_read_status_reg(state);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: No zl10036 found\n", __func__);
+ goto error;
+ }
+
+ ret = zl10036_init_regs(state);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: tuner initialization failed\n",
+ __func__);
+ goto error;
+ }
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+ fe->tuner_priv = state;
+
+ memcpy(&fe->ops.tuner_ops, &zl10036_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+ printk(KERN_INFO "%s: tuner initialization (%s addr=0x%02x) ok\n",
+ __func__, fe->ops.tuner_ops.info.name, config->tuner_address);
+
+ return fe;
+
+error:
+ zl10036_release(fe);
+ return NULL;
+}
+EXPORT_SYMBOL(zl10036_attach);
+
+module_param_named(debug, zl10036_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+MODULE_DESCRIPTION("DVB ZL10036 driver");
+MODULE_AUTHOR("Tino Reichardt");
+MODULE_AUTHOR("Matthias Schwarzott");
+MODULE_LICENSE("GPL");
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff