[media] ARM: OMAP2: RX-51: update si4713 platform data
authorSebastian Reichel <sre@kernel.org>
Mon, 10 Nov 2014 20:34:43 +0000 (17:34 -0300)
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>
Fri, 14 Nov 2014 20:13:25 +0000 (18:13 -0200)
This updates platform data related to Si4713, which
has been updated to be compatible with DT interface.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
arch/arm/mach-omap2/board-rx51-peripherals.c

index ddfc8df83c6a9adf2c0d128c688d16e094708ac2..ec2e4101988b921acef873860a1d16a9dcffeb52 100644 (file)
@@ -23,6 +23,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/gpio/machine.h>
 #include <linux/mmc/host.h>
 #include <linux/power/isp1704_charger.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -38,7 +39,6 @@
 
 #include <sound/tlv320aic3x.h>
 #include <sound/tpa6130a2-plat.h>
-#include <media/radio-si4713.h>
 #include <media/si4713.h>
 #include <linux/platform_data/leds-lp55xx.h>
 
@@ -760,46 +760,17 @@ static struct regulator_init_data rx51_vintdig = {
        },
 };
 
-static const char * const si4713_supply_names[] = {
-       "vio",
-       "vdd",
-};
-
-static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
-       .supplies       = ARRAY_SIZE(si4713_supply_names),
-       .supply_names   = si4713_supply_names,
-       .gpio_reset     = RX51_FMTX_RESET_GPIO,
-};
-
-static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = {
-       I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
-       .platform_data  = &rx51_si4713_i2c_data,
-};
-
-static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = {
-       .i2c_bus        = 2,
-       .subdev_board_info = &rx51_si4713_board_info,
-};
-
-static struct platform_device rx51_si4713_dev __initdata_or_module = {
-       .name   = "radio-si4713",
-       .id     = -1,
-       .dev    = {
-               .platform_data  = &rx51_si4713_data,
+static struct gpiod_lookup_table rx51_fmtx_gpios_table = {
+       .dev_id = "2-0063",
+       .table = {
+               GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */
+               { },
        },
 };
 
-static __init void rx51_init_si4713(void)
+static __init void rx51_gpio_init(void)
 {
-       int err;
-
-       err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
-       if (err) {
-               printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
-               return;
-       }
-       rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ);
-       platform_device_register(&rx51_si4713_dev);
+       gpiod_add_lookup_table(&rx51_fmtx_gpios_table);
 }
 
 static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
@@ -1029,7 +1000,17 @@ static struct aic3x_pdata rx51_aic3x_data2 = {
        .gpio_reset = 60,
 };
 
+static struct si4713_platform_data rx51_si4713_platform_data = {
+       .is_platform_device = true
+};
+
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+       {
+               I2C_BOARD_INFO("si4713", 0x63),
+               .platform_data = &rx51_si4713_platform_data,
+       },
+#endif
        {
                I2C_BOARD_INFO("tlv320aic3x", 0x18),
                .platform_data = &rx51_aic3x_data,
@@ -1070,6 +1051,10 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
 
 static int __init rx51_i2c_init(void)
 {
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+       int err;
+#endif
+
        if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
            system_rev >= SYSTEM_REV_B_USES_VAUX3) {
                rx51_twldata.vaux3 = &rx51_vaux3_mmc;
@@ -1087,6 +1072,14 @@ static int __init rx51_i2c_init(void)
        rx51_twldata.vdac->constraints.name = "VDAC";
 
        omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+       err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
+       if (err) {
+               printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
+               return err;
+       }
+       rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ);
+#endif
        omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
                              ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
 #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
@@ -1300,6 +1293,7 @@ static void __init rx51_init_omap3_rom_rng(void)
 
 void __init rx51_peripherals_init(void)
 {
+       rx51_gpio_init();
        rx51_i2c_init();
        regulator_has_full_constraints();
        gpmc_onenand_init(board_onenand_data);
@@ -1307,7 +1301,6 @@ void __init rx51_peripherals_init(void)
        rx51_add_gpio_keys();
        rx51_init_wl1251();
        rx51_init_tsc2005();
-       rx51_init_si4713();
        rx51_init_lirc();
        spi_register_board_info(rx51_peripherals_spi_board_info,
                                ARRAY_SIZE(rx51_peripherals_spi_board_info));