if (ret)
/* handle error */
- of_i2c_register_devices(adapter);
/* Enumerate the slave devices behind this bus via ACPI */
acpi_i2c_register_devices(adapter);
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/of_gpio.h>
-#include <linux/of_i2c.h>
#include <linux/slab.h>
#include <linux/export.h>
*/
#include <linux/i2c.h>
-#include <linux/of_i2c.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/consumer.h>
#include <drm/drm_encoder_slave.h>
*/
#include <linux/i2c.h>
-#include <linux/of_i2c.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
#include "drm.h"
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/platform_data/dma-atmel.h>
return rc;
}
- of_i2c_register_devices(&dev->adapter);
-
dev_info(dev->dev, "AT91 i2c bus driver.\n");
return 0;
}
#include <linux/dma-mapping.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
-#include <linux/of_i2c.h>
#include <sysdev/fsl_soc.h>
#include <asm/cpm.h>
dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
cpm->adap.name);
- /*
- * register OF I2C devices
- */
- of_i2c_register_devices(&cpm->adap);
-
return 0;
out_shut:
cpm_i2c_shutdown(cpm);
#include <linux/slab.h>
#include <linux/cpufreq.h>
#include <linux/gpio.h>
-#include <linux/of_i2c.h>
#include <linux/of_device.h>
#include <linux/platform_data/i2c-davinci.h>
dev_err(&pdev->dev, "failure adding adapter\n");
goto err_unuse_clocks;
}
- of_i2c_register_devices(adap);
return 0;
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/of.h>
-#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
dev_err(&pdev->dev, "failure adding adapter\n");
return r;
}
- of_i2c_register_devices(adap);
acpi_i2c_register_devices(adap);
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
-#include <linux/of_i2c.h>
struct i2c_gpio_private_data {
struct i2c_adapter adap;
if (ret)
goto err_add_bus;
- of_i2c_register_devices(adap);
-
platform_set_drvdata(pdev, priv);
dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/err.h>
-#include <linux/of_i2c.h>
#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
defined CONFIG_DMI
goto exit_free_irq;
}
- of_i2c_register_devices(&priv->adapter);
i801_probe_optional_slaves(priv);
/* We ignore errors - multiplexing is optional */
i801_add_mux(priv);
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/of_platform.h>
-#include <linux/of_i2c.h>
#include "i2c-ibm_iic.h"
dev_info(&ofdev->dev, "using %s mode\n",
dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
- /* Now register all the child nodes */
- of_i2c_register_devices(adap);
-
return 0;
error_cleanup:
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_i2c.h>
#include <linux/platform_data/i2c-imx.h>
/** Defines ********************************************************************
return ret;
}
- of_i2c_register_devices(&i2c_imx->adapter);
-
/* Set up platform driver data */
platform_set_drvdata(pdev, i2c_imx);
clk_disable_unprepare(i2c_imx->clk);
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/of_platform.h>
-#include <linux/of_i2c.h>
#include <linux/slab.h>
#include <linux/io.h>
dev_err(i2c->dev, "failed to add adapter\n");
goto fail_add;
}
- of_i2c_register_devices(&i2c->adap);
return result;
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
-#include <linux/of_i2c.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/delay.h>
goto exit_free_irq;
}
- of_i2c_register_devices(&drv_data->adapter);
-
return 0;
exit_free_irq:
#include <linux/stmp_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_i2c.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
return err;
}
- of_i2c_register_devices(adap);
-
return 0;
}
#include <linux/pm_runtime.h>
#include <linux/platform_data/i2c-nomadik.h>
#include <linux/of.h>
-#include <linux/of_i2c.h>
#include <linux/pinctrl/consumer.h>
#define DRIVER_NAME "nmk-i2c"
goto err_add_adap;
}
- of_i2c_register_devices(adap);
-
pm_runtime_put(&adev->dev);
return 0;
#include <linux/i2c-ocores.h>
#include <linux/slab.h>
#include <linux/io.h>
-#include <linux/of_i2c.h>
#include <linux/log2.h>
struct ocores_i2c {
if (pdata) {
for (i = 0; i < pdata->num_devices; i++)
i2c_new_device(&i2c->adap, pdata->devices + i);
- } else {
- of_i2c_register_devices(&i2c->adap);
}
return 0;
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of_i2c.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/slab.h>
}
dev_info(i2c->dev, "version %s\n", DRV_VERSION);
- of_i2c_register_devices(&i2c->adap);
-
return 0;
out:
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_i2c.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/i2c-omap.h>
dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
major, minor, dev->speed);
- of_i2c_register_devices(adap);
-
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/slab.h>
-#include <linux/of_i2c.h>
#define I2C_PNX_TIMEOUT_DEFAULT 10 /* msec */
#define I2C_PNX_SPEED_KHZ_DEFAULT 100
goto out_irq;
}
- of_i2c_register_devices(&alg_data->adapter);
-
dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
alg_data->adapter.name, res->start, alg_data->irq);
adapter->algo = &i2c_powermac_algorithm;
i2c_set_adapdata(adapter, bus);
adapter->dev.parent = &dev->dev;
- adapter->dev.of_node = dev->dev.of_node;
+
+ /* Clear of_node to skip automatic registration of i2c child nodes */
+ adapter->dev.of_node = NULL;
rc = i2c_add_adapter(adapter);
if (rc) {
printk(KERN_ERR "i2c-powermac: Adapter %s registration "
printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
- /* Cannot use of_i2c_register_devices() due to Apple device-tree
- * funkyness
- */
+ /* Use custom child registration due to Apple device-tree funkyness */
+ adapter->dev.of_node = dev->dev.of_node;
i2c_powermac_register_devices(adapter, bus);
return 0;
#include <linux/i2c-pxa.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/clk.h>
printk(KERN_INFO "I2C: Failed to add bus\n");
goto eadapt;
}
- of_i2c_register_devices(&i2c->adap);
platform_set_drvdata(dev, i2c);
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/io.h>
-#include <linux/of_i2c.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
return ret;
}
- of_i2c_register_devices(&i2c->adap);
platform_set_drvdata(pdev, i2c);
pm_runtime_enable(&pdev->dev);
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/of_i2c.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
"I2C adapter %d with bus speed %lu Hz (L/H=%x/%x)\n",
adap->nr, pd->bus_speed, pd->iccl, pd->icch);
- of_i2c_register_devices(adap);
return 0;
err_all:
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
-#include <linux/of_i2c.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
clk_disable(clk);
- of_i2c_register_devices(adap);
-
dev_info(&pdev->dev, " I2C adapter ready to operate\n");
return 0;
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <linux/of_i2c.h>
/* the name of this kernel module */
#define NAME "stu300"
platform_set_drvdata(pdev, dev);
dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n",
dev->virtbase, dev->irq);
- of_i2c_register_devices(adap);
return 0;
}
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/of_i2c.h>
#include <linux/of_device.h>
#include <linux/module.h>
#include <linux/clk/tegra.h>
return ret;
}
- of_i2c_register_devices(&i2c_dev->adapter);
-
return 0;
}
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/io.h>
-#include <linux/of_i2c.h>
#define I2C_CONTROL 0x00
#define I2C_CONTROLS 0x00
ret = i2c_bit_add_numbered_bus(&i2c->adap);
if (ret >= 0) {
platform_set_drvdata(dev, i2c);
- of_i2c_register_devices(&i2c->adap);
return 0;
}
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/of_i2c.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
platform_set_drvdata(pdev, i2c_dev);
- of_i2c_register_devices(adap);
-
return 0;
}
#include <linux/i2c-xiic.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <linux/of_i2c.h>
#define DRIVER_NAME "xiic-i2c"
i2c_new_device(&i2c->adap, pdata->devices + i);
}
- of_i2c_register_devices(&i2c->adap);
-
return 0;
add_adapter_failed:
SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
Jean Delvare <khali@linux-fr.org>
Mux support by Rodolfo Giometti <giometti@enneenne.com> and
- Michael Lawnick <michael.lawnick.ext@nsn.com> */
+ Michael Lawnick <michael.lawnick.ext@nsn.com>
+ OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
+ (based on a previous patch from Jon Smirl <jonsmirl@gmail.com>) and
+ (c) 2013 Wolfram Sang <wsa@the-dreams.de>
+ */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/idr.h>
#include <linux/mutex.h>
+#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_irq.h>
#include <linux/completion.h>
#include <linux/hardirq.h>
#include <linux/irqflags.h>
up_read(&__i2c_board_lock);
}
+/* OF support code */
+
+#if IS_ENABLED(CONFIG_OF)
+static void of_i2c_register_devices(struct i2c_adapter *adap)
+{
+ void *result;
+ struct device_node *node;
+
+ /* Only register child devices if the adapter has a node pointer set */
+ if (!adap->dev.of_node)
+ return;
+
+ dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
+
+ for_each_available_child_of_node(adap->dev.of_node, node) {
+ struct i2c_board_info info = {};
+ struct dev_archdata dev_ad = {};
+ const __be32 *addr;
+ int len;
+
+ dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
+
+ if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
+ dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
+ node->full_name);
+ continue;
+ }
+
+ addr = of_get_property(node, "reg", &len);
+ if (!addr || (len < sizeof(int))) {
+ dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
+ node->full_name);
+ continue;
+ }
+
+ info.addr = be32_to_cpup(addr);
+ if (info.addr > (1 << 10) - 1) {
+ dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
+ info.addr, node->full_name);
+ continue;
+ }
+
+ info.irq = irq_of_parse_and_map(node, 0);
+ info.of_node = of_node_get(node);
+ info.archdata = &dev_ad;
+
+ if (of_get_property(node, "wakeup-source", NULL))
+ info.flags |= I2C_CLIENT_WAKE;
+
+ request_module("%s%s", I2C_MODULE_PREFIX, info.type);
+
+ result = i2c_new_device(adap, &info);
+ if (result == NULL) {
+ dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
+ node->full_name);
+ of_node_put(node);
+ irq_dispose_mapping(info.irq);
+ continue;
+ }
+ }
+}
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+ return dev->of_node == data;
+}
+
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, node,
+ of_dev_node_match);
+ if (!dev)
+ return NULL;
+
+ return i2c_verify_client(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_device_by_node);
+
+/* must call put_device() when done with returned i2c_adapter device */
+struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, node,
+ of_dev_node_match);
+ if (!dev)
+ return NULL;
+
+ return i2c_verify_adapter(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
+#else
+static void of_i2c_register_devices(struct i2c_adapter *adap) { }
+#endif /* CONFIG_OF */
+
static int i2c_do_add_adapter(struct i2c_driver *driver,
struct i2c_adapter *adap)
{
exit_recovery:
/* create pre-declared device nodes */
+ of_i2c_register_devices(adap);
+
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);
}
EXPORT_SYMBOL(i2c_del_adapter);
-
/* ------------------------------------------------------------------------- */
int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *))
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
#include <linux/of.h>
-#include <linux/of_i2c.h>
/* multiplexer per channel data */
struct i2c_mux_priv {
dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
i2c_adapter_id(&priv->adap));
- of_i2c_register_devices(&priv->adap);
-
return &priv->adap;
}
EXPORT_SYMBOL_GPL(i2c_add_mux_adapter);
#include <linux/i2c-mux.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/of_i2c.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/gpio.h>
-#include <linux/of_i2c.h>
#include <linux/of_gpio.h>
struct gpiomux {
#include <linux/i2c-mux.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/of_i2c.h>
#include <linux/pinctrl/consumer.h>
#include <linux/i2c-mux-pinctrl.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/module.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
pm_runtime_enable(&pdev->dev);
pm_runtime_enable(&i2c_adap->dev);
- of_i2c_register_devices(i2c_adap);
-
return 0;
}
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
-#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/types.h>
def_bool y
depends on !SPARC
-config OF_I2C
- def_tristate I2C
- depends on I2C
- help
- OpenFirmware I2C accessors
-
config OF_NET
depends on NETDEVICES
def_bool y
obj-$(CONFIG_OF_PROMTREE) += pdt.o
obj-$(CONFIG_OF_ADDRESS) += address.o
obj-$(CONFIG_OF_IRQ) += irq.o
-obj-$(CONFIG_OF_I2C) += of_i2c.o
obj-$(CONFIG_OF_NET) += of_net.o
obj-$(CONFIG_OF_SELFTEST) += selftest.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
+++ /dev/null
-/*
- * OF helpers for the I2C API
- *
- * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
- *
- * Based on a previous patch from Jon Smirl <jonsmirl@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/of_i2c.h>
-#include <linux/of_irq.h>
-#include <linux/module.h>
-
-void of_i2c_register_devices(struct i2c_adapter *adap)
-{
- void *result;
- struct device_node *node;
-
- /* Only register child devices if the adapter has a node pointer set */
- if (!adap->dev.of_node)
- return;
-
- dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
-
- for_each_available_child_of_node(adap->dev.of_node, node) {
- struct i2c_board_info info = {};
- struct dev_archdata dev_ad = {};
- const __be32 *addr;
- int len;
-
- dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
-
- if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
- dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
- node->full_name);
- continue;
- }
-
- addr = of_get_property(node, "reg", &len);
- if (!addr || (len < sizeof(int))) {
- dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
- node->full_name);
- continue;
- }
-
- info.addr = be32_to_cpup(addr);
- if (info.addr > (1 << 10) - 1) {
- dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
- info.addr, node->full_name);
- continue;
- }
-
- info.irq = irq_of_parse_and_map(node, 0);
- info.of_node = of_node_get(node);
- info.archdata = &dev_ad;
-
- if (of_get_property(node, "wakeup-source", NULL))
- info.flags |= I2C_CLIENT_WAKE;
-
- request_module("%s%s", I2C_MODULE_PREFIX, info.type);
-
- result = i2c_new_device(adap, &info);
- if (result == NULL) {
- dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
- node->full_name);
- of_node_put(node);
- irq_dispose_mapping(info.irq);
- continue;
- }
- }
-}
-EXPORT_SYMBOL(of_i2c_register_devices);
-
-static int of_dev_node_match(struct device *dev, void *data)
-{
- return dev->of_node == data;
-}
-
-/* must call put_device() when done with returned i2c_client device */
-struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
-{
- struct device *dev;
-
- dev = bus_find_device(&i2c_bus_type, NULL, node,
- of_dev_node_match);
- if (!dev)
- return NULL;
-
- return i2c_verify_client(dev);
-}
-EXPORT_SYMBOL(of_find_i2c_device_by_node);
-
-/* must call put_device() when done with returned i2c_adapter device */
-struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
-{
- struct device *dev;
-
- dev = bus_find_device(&i2c_bus_type, NULL, node,
- of_dev_node_match);
- if (!dev)
- return NULL;
-
- return i2c_verify_adapter(dev);
-}
-EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
-
-MODULE_LICENSE("GPL");
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/module.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/spinlock.h>
#endif /* I2C */
+#if IS_ENABLED(CONFIG_OF)
+/* must call put_device() when done with returned i2c_client device */
+extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
+
+/* must call put_device() when done with returned i2c_adapter device */
+extern struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node);
+
+#else
+
+static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+ return NULL;
+}
+
+static inline struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+ return NULL;
+}
+#endif /* CONFIG_OF */
+
#if IS_ENABLED(CONFIG_ACPI_I2C)
extern void acpi_i2c_register_devices(struct i2c_adapter *adap);
#else
+++ /dev/null
-/*
- * Generic I2C API implementation for PowerPC.
- *
- * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __LINUX_OF_I2C_H
-#define __LINUX_OF_I2C_H
-
-#if defined(CONFIG_OF_I2C) || defined(CONFIG_OF_I2C_MODULE)
-#include <linux/i2c.h>
-
-extern void of_i2c_register_devices(struct i2c_adapter *adap);
-
-/* must call put_device() when done with returned i2c_client device */
-extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
-
-/* must call put_device() when done with returned i2c_adapter device */
-extern struct i2c_adapter *of_find_i2c_adapter_by_node(
- struct device_node *node);
-
-#else
-static inline void of_i2c_register_devices(struct i2c_adapter *adap)
-{
- return;
-}
-
-static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
-{
- return NULL;
-}
-
-/* must call put_device() when done with returned i2c_adapter device */
-static inline struct i2c_adapter *of_find_i2c_adapter_by_node(
- struct device_node *node)
-{
- return NULL;
-}
-#endif /* CONFIG_OF_I2C */
-
-#endif /* __LINUX_OF_I2C_H */
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
#include <linux/clk.h>
#include <sound/soc.h>
#include <linux/module.h>
#include <linux/of_platform.h>
-#include <linux/of_i2c.h>
+#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <sound/soc.h>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff