libertas: support mesh for various firmware versions
authorBing Zhao <bzhao@marvell.com>
Wed, 25 Mar 2009 16:51:16 +0000 (09:51 -0700)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 22 Apr 2009 20:54:26 +0000 (16:54 -0400)
CMD_MESH_CONFIG command ID and a couple of structure members in TxPD,
RxPD have been changed in firmware version 10.x.y.z and newer.

Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/libertas/cmd.c
drivers/net/wireless/libertas/defs.h
drivers/net/wireless/libertas/dev.h
drivers/net/wireless/libertas/host.h
drivers/net/wireless/libertas/hostcmd.h
drivers/net/wireless/libertas/main.c
drivers/net/wireless/libertas/rx.c
drivers/net/wireless/libertas/tx.c
drivers/net/wireless/libertas/types.h

index 8c3605cdc64c090de61dd4fdd98e3cb23b9c4d6a..c455b9abbfc03104cabc9936f5d3a5680d9df0b3 100644 (file)
@@ -119,6 +119,19 @@ int lbs_update_hw_spec(struct lbs_private *priv)
        lbs_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n",
                    cmd.hwifversion, cmd.version);
 
+       /* Determine mesh_fw_ver from fwrelease and fwcapinfo */
+       /* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
+       /* 5.110.22 have mesh command with 0xa3 command id */
+       /* 10.0.0.p0 FW brings in mesh config command with different id */
+       /* Check FW version MSB and initialize mesh_fw_ver */
+       if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5)
+               priv->mesh_fw_ver = MESH_FW_OLD;
+       else if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
+               (priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK))
+               priv->mesh_fw_ver = MESH_FW_NEW;
+       else
+               priv->mesh_fw_ver = MESH_NONE;
+
        /* Clamp region code to 8-bit since FW spec indicates that it should
         * only ever be 8-bit, even though the field size is 16-bit.  Some firmware
         * returns non-zero high 8 bits here.
@@ -1036,17 +1049,26 @@ static int __lbs_mesh_config_send(struct lbs_private *priv,
                                  uint16_t action, uint16_t type)
 {
        int ret;
+       u16 command = CMD_MESH_CONFIG_OLD;
 
        lbs_deb_enter(LBS_DEB_CMD);
 
-       cmd->hdr.command = cpu_to_le16(CMD_MESH_CONFIG);
+       /*
+        * Command id is 0xac for v10 FW along with mesh interface
+        * id in bits 14-13-12.
+        */
+       if (priv->mesh_fw_ver == MESH_FW_NEW)
+               command = CMD_MESH_CONFIG |
+                         (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET);
+
+       cmd->hdr.command = cpu_to_le16(command);
        cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config));
        cmd->hdr.result = 0;
 
        cmd->type = cpu_to_le16(type);
        cmd->action = cpu_to_le16(action);
 
-       ret = lbs_cmd_with_response(priv, CMD_MESH_CONFIG, cmd);
+       ret = lbs_cmd_with_response(priv, command, cmd);
 
        lbs_deb_leave(LBS_DEB_CMD);
        return ret;
index e8dfde39abfc1ccedf841bfb6b5783c730e229f2..48da157d6cdab3141ad95c3a2ae842ae3c2cae74 100644 (file)
@@ -227,6 +227,20 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in
 #define TxPD_CONTROL_WDS_FRAME (1<<17)
 #define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
 
+/** Mesh interface ID */
+#define MESH_IFACE_ID                                  0x0001
+/** Mesh id should be in bits 14-13-12 */
+#define MESH_IFACE_BIT_OFFSET                          0x000c
+/** Mesh enable bit in FW capability */
+#define MESH_CAPINFO_ENABLE_MASK                       (1<<16)
+
+/** FW definition from Marvell v5 */
+#define MRVL_FW_V5                                     (0x05)
+/** FW definition from Marvell v10 */
+#define MRVL_FW_V10                                    (0x0a)
+/** FW major revision definition */
+#define MRVL_FW_MAJOR_REV(x)                           ((x)>>24)
+
 /** RxPD status */
 
 #define MRVDRV_RXPD_STATUS_OK                0x0001
@@ -380,6 +394,13 @@ enum KEY_INFO_WPA {
        KEY_INFO_WPA_ENABLED = 0x04
 };
 
+/** mesh_fw_ver */
+enum _mesh_fw_ver {
+       MESH_NONE = 0, /* MESH is not supported */
+       MESH_FW_OLD,   /* MESH is supported in FW V5 */
+       MESH_FW_NEW,   /* MESH is supported in FW V10 and newer */
+};
+
 /* Default values for fwt commands. */
 #define FWT_DEFAULT_METRIC 0
 #define FWT_DEFAULT_DIR 1
index 27e81fd97c949c66ad93cb59784be75e7a6342ef..cbaafa653b6a78b02e97f3a7f2f441cc425563d2 100644 (file)
@@ -101,6 +101,7 @@ struct lbs_mesh_stats {
 /** Private structure for the MV device */
 struct lbs_private {
        int mesh_open;
+       int mesh_fw_ver;
        int infra_open;
        int mesh_autostart_enabled;
 
index d4457ef808a647c8c174de7d015b27ec01622127..8ff8ac9d817e79815e596278ae8aacb8e8576a5c 100644 (file)
@@ -83,7 +83,8 @@
 #define CMD_FWT_ACCESS                         0x0095
 #define CMD_802_11_MONITOR_MODE                        0x0098
 #define CMD_MESH_ACCESS                                0x009b
-#define CMD_MESH_CONFIG                                0x00a3
+#define CMD_MESH_CONFIG_OLD                    0x00a3
+#define CMD_MESH_CONFIG                                0x00ac
 #define        CMD_SET_BOOT2_VER                       0x00a5
 #define CMD_802_11_BEACON_CTRL                 0x00b0
 
index a899aeb676bbbeb744dadb0bc313fe427611fd86..391c54ab2b0902e2396cdf51cd74366bddbdbb1d 100644 (file)
 
 /* TxPD descriptor */
 struct txpd {
-       /* Current Tx packet status */
-       __le32 tx_status;
+       /* union to cope up with later FW revisions */
+       union {
+               /* Current Tx packet status */
+               __le32 tx_status;
+               struct {
+                       /* BSS type: client, AP, etc. */
+                       u8 bss_type;
+                       /* BSS number */
+                       u8 bss_num;
+                       /* Reserved */
+                       __le16 reserved;
+               } bss;
+       } u;
        /* Tx control */
        __le32 tx_control;
        __le32 tx_packet_location;
@@ -36,8 +47,17 @@ struct txpd {
 
 /* RxPD Descriptor */
 struct rxpd {
-       /* Current Rx packet status */
-       __le16 status;
+       /* union to cope up with later FW revisions */
+       union {
+               /* Current Rx packet status */
+               __le16 status;
+               struct {
+                       /* BSS type: client, AP, etc. */
+                       u8 bss_type;
+                       /* BSS number */
+                       u8 bss_num;
+               } bss;
+       } u;
 
        /* SNR */
        u8 snr;
index 8ae935ac32f177ea990c67cb547eb231afa3aeb6..89575e448015d38884e76083d3d508cd9228b4b2 100644 (file)
@@ -1307,8 +1307,10 @@ int lbs_start_card(struct lbs_private *priv)
 
        lbs_update_channel(priv);
 
-       /* 5.0.16p0 is known to NOT support any mesh */
-       if (priv->fwrelease > 0x05001000) {
+       /* Check mesh FW version and appropriately send the mesh start
+        * command
+        */
+       if (priv->mesh_fw_ver == MESH_FW_OLD) {
                /* Enable mesh, if supported, and work out which TLV it uses.
                   0x100 + 291 is an unofficial value used in 5.110.20.pXX
                   0x100 + 37 is the official value used in 5.110.21.pXX
@@ -1322,27 +1324,35 @@ int lbs_start_card(struct lbs_private *priv)
                   It's just that 5.110.20.pXX will not have done anything
                   useful */
 
-               priv->mesh_tlv = 0x100 + 291;
+               priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID;
                if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
                                    priv->curbssparams.channel)) {
-                       priv->mesh_tlv = 0x100 + 37;
+                       priv->mesh_tlv = TLV_TYPE_MESH_ID;
                        if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
                                            priv->curbssparams.channel))
                                priv->mesh_tlv = 0;
                }
-               if (priv->mesh_tlv) {
-                       lbs_add_mesh(priv);
-
-                       if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
-                               lbs_pr_err("cannot register lbs_mesh attribute\n");
-
-                       /* While rtap isn't related to mesh, only mesh-enabled
-                        * firmware implements the rtap functionality via
-                        * CMD_802_11_MONITOR_MODE.
-                        */
-                       if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
-                               lbs_pr_err("cannot register lbs_rtap attribute\n");
-               }
+       } else if (priv->mesh_fw_ver == MESH_FW_NEW) {
+               /* 10.0.0.pXX new firmwares should succeed with TLV
+                * 0x100+37; Do not invoke command with old TLV.
+                */
+               priv->mesh_tlv = TLV_TYPE_MESH_ID;
+               if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
+                                   priv->curbssparams.channel))
+                       priv->mesh_tlv = 0;
+       }
+       if (priv->mesh_tlv) {
+               lbs_add_mesh(priv);
+
+               if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
+                       lbs_pr_err("cannot register lbs_mesh attribute\n");
+
+               /* While rtap isn't related to mesh, only mesh-enabled
+                * firmware implements the rtap functionality via
+                * CMD_802_11_MONITOR_MODE.
+                */
+               if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
+                       lbs_pr_err("cannot register lbs_rtap attribute\n");
        }
 
        lbs_debugfs_init_one(priv, dev);
index 8e669775cb5d8d822fee69ca8dc73afbe162d4b5..820c22d9220f9d0ac4137df25a29593cacf10582 100644 (file)
@@ -160,8 +160,15 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
 
        p_rx_pkt = (struct rxpackethdr *) skb->data;
        p_rx_pd = &p_rx_pkt->rx_pd;
-       if (priv->mesh_dev && (p_rx_pd->rx_control & RxPD_MESH_FRAME))
-               dev = priv->mesh_dev;
+       if (priv->mesh_dev) {
+               if (priv->mesh_fw_ver == MESH_FW_OLD) {
+                       if (p_rx_pd->rx_control & RxPD_MESH_FRAME)
+                               dev = priv->mesh_dev;
+               } else if (priv->mesh_fw_ver == MESH_FW_NEW) {
+                       if (p_rx_pd->u.bss.bss_num == MESH_IFACE_ID)
+                               dev = priv->mesh_dev;
+               }
+       }
 
        lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data,
                 min_t(unsigned int, skb->len, 100));
@@ -174,18 +181,6 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
                goto done;
        }
 
-       /*
-        * Check rxpd status and update 802.3 stat,
-        */
-       if (!(p_rx_pd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
-               lbs_deb_rx("rx err: frame received with bad status\n");
-               lbs_pr_alert("rxpd not ok\n");
-               dev->stats.rx_errors++;
-               ret = 0;
-               dev_kfree_skb(skb);
-               goto done;
-       }
-
        lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
               skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
 
@@ -334,14 +329,6 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
                goto done;
        }
 
-       /*
-        * Check rxpd status and update 802.3 stat,
-        */
-       if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
-               //lbs_deb_rx("rx err: frame received with bad status\n");
-               dev->stats.rx_errors++;
-       }
-
        lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
               skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
 
@@ -353,8 +340,6 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
        radiotap_hdr.hdr.it_pad = 0;
        radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr));
        radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT);
-       if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
-               radiotap_hdr.flags |= IEEE80211_RADIOTAP_F_BADFCS;
        radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate);
        /* XXX must check no carryout */
        radiotap_hdr.antsignal = prxpd->snr + prxpd->nf;
index f10aa39a6b68e6abe650934ccc4957f653869a98..160cfd8311c08ad5225b418d33e37ce5dd9fd6fa 100644 (file)
@@ -132,8 +132,12 @@ int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
        txpd->tx_packet_length = cpu_to_le16(pkt_len);
        txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd));
 
-       if (dev == priv->mesh_dev)
-               txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
+       if (dev == priv->mesh_dev) {
+               if (priv->mesh_fw_ver == MESH_FW_OLD)
+                       txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
+               else if (priv->mesh_fw_ver == MESH_FW_NEW)
+                       txpd->u.bss.bss_num = MESH_IFACE_ID;
+       }
 
        lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) &txpd, sizeof(struct txpd));
 
index fb7a2d1a2525e5efae1d78c9dcf0edec7ab1a76c..de03b9c9c2048ee1341b1ccc505806b29cf5efec 100644 (file)
@@ -94,6 +94,8 @@ struct ieeetypes_assocrsp {
 #define TLV_TYPE_TSFTIMESTAMP      (PROPRIETARY_TLV_BASE_ID + 19)
 #define TLV_TYPE_RSSI_HIGH          (PROPRIETARY_TLV_BASE_ID + 22)
 #define TLV_TYPE_SNR_HIGH           (PROPRIETARY_TLV_BASE_ID + 23)
+#define TLV_TYPE_MESH_ID            (PROPRIETARY_TLV_BASE_ID + 37)
+#define TLV_TYPE_OLD_MESH_ID        (PROPRIETARY_TLV_BASE_ID + 291)
 
 /** TLV related data structures*/
 struct mrvlietypesheader {