usb: gadget: udc: atmel: fix possible IN hang issue

When receive data, the RXRDY in status register set by hardware
after a new packet has been stored in the endpoint FIFO. When it
is copied from FIFO, this bit is cleared which make the FIFO can
be accessed again.

In the receive_data() function, this bit RXRDY has been cleared.
So, after the receive_data() function return, this bit should
not be cleared again, or else it may cause the accessing FIFO
corrupt, which will make the data loss.

Fixes: 914a3f3b3754 (USB: add atmel_usba_udc driver)
Cc: <stable@vger.kernel.org> # 2.6.24+
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 63e90f5c05cbb17f4916e96a848031d074bc97a6..93328ea7eb1b6c4ac965315880dfb9b4d5fe3ebe 100644 (file)
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1563,7 +1563,6 @@ static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
        if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
                DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
                receive_data(ep);
-               usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
        }
 }