IB/hfi1: Add QSFP sanity pre-check

Sometimes a QSFP device does not respond in the expected time
after a power-on.  Add a read pre-check/retry when starting
the link on driver load.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c
index b32638d58ae82c73f920afee4a7fd0a4386581a8..ec3635a7ee3ec06287fb574419fa56ba92cd4e06 100644 (file)
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -9490,6 +9490,78 @@ static void init_lcb(struct hfi1_devdata *dd)
        write_csr(dd, DC_LCB_CFG_TX_FIFOS_RESET, 0x00);
 }
 
+/*
+ * Perform a test read on the QSFP.  Return 0 on success, -ERRNO
+ * on error.
+ */
+static int test_qsfp_read(struct hfi1_pportdata *ppd)
+{
+       int ret;
+       u8 status;
+
+       /* report success if not a QSFP */
+       if (ppd->port_type != PORT_TYPE_QSFP)
+               return 0;
+
+       /* read byte 2, the status byte */
+       ret = one_qsfp_read(ppd, ppd->dd->hfi1_id, 2, &status, 1);
+       if (ret < 0)
+               return ret;
+       if (ret != 1)
+               return -EIO;
+
+       return 0; /* success */
+}
+
+/*
+ * Values for QSFP retry.
+ *
+ * Give up after 10s (20 x 500ms).  The overall timeout was empirically
+ * arrived at from experience on a large cluster.
+ */
+#define MAX_QSFP_RETRIES 20
+#define QSFP_RETRY_WAIT 500 /* msec */
+
+/*
+ * Try a QSFP read.  If it fails, schedule a retry for later.
+ * Called on first link activation after driver load.
+ */
+static void try_start_link(struct hfi1_pportdata *ppd)
+{
+       if (test_qsfp_read(ppd)) {
+               /* read failed */
+               if (ppd->qsfp_retry_count >= MAX_QSFP_RETRIES) {
+                       dd_dev_err(ppd->dd, "QSFP not responding, giving up\n");
+                       return;
+               }
+               dd_dev_info(ppd->dd,
+                           "QSFP not responding, waiting and retrying %d\n",
+                           (int)ppd->qsfp_retry_count);
+               ppd->qsfp_retry_count++;
+               queue_delayed_work(ppd->hfi1_wq, &ppd->start_link_work,
+                                  msecs_to_jiffies(QSFP_RETRY_WAIT));
+               return;
+       }
+       ppd->qsfp_retry_count = 0;
+
+       /*
+        * Tune the SerDes to a ballpark setting for optimal signal and bit
+        * error rate.  Needs to be done before starting the link.
+        */
+       tune_serdes(ppd);
+       start_link(ppd);
+}
+
+/*
+ * Workqueue function to start the link after a delay.
+ */
+void handle_start_link(struct work_struct *work)
+{
+       struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata,
+                                                 start_link_work.work);
+       try_start_link(ppd);
+}
+
 int bringup_serdes(struct hfi1_pportdata *ppd)
 {
        struct hfi1_devdata *dd = ppd->dd;
@@ -9525,14 +9597,8 @@ int bringup_serdes(struct hfi1_pportdata *ppd)
                set_qsfp_int_n(ppd, 1);
        }
 
-       /*
-        * Tune the SerDes to a ballpark setting for
-        * optimal signal and bit error rate
-        * Needs to be done before starting the link
-        */
-       tune_serdes(ppd);
-
-       return start_link(ppd);
+       try_start_link(ppd);
+       return 0;
 }
 
 void hfi1_quiet_serdes(struct hfi1_pportdata *ppd)
@@ -9549,6 +9615,10 @@ void hfi1_quiet_serdes(struct hfi1_pportdata *ppd)
        ppd->driver_link_ready = 0;
        ppd->link_enabled = 0;
 
+       ppd->qsfp_retry_count = MAX_QSFP_RETRIES; /* prevent more retries */
+       flush_delayed_work(&ppd->start_link_work);
+       cancel_delayed_work_sync(&ppd->start_link_work);
+
        ppd->offline_disabled_reason =
                        HFI1_ODR_MASK(OPA_LINKDOWN_REASON_SMA_DISABLED);
        set_link_down_reason(ppd, OPA_LINKDOWN_REASON_SMA_DISABLED, 0,

diff --git a/drivers/infiniband/hw/hfi1/chip.h b/drivers/infiniband/hw/hfi1/chip.h
index ed11107c50fe50614efc39b469a31cb7e240291c..e29573769efc04a6a059db8c06ae2b54a45d1d70 100644 (file)
--- a/drivers/infiniband/hw/hfi1/chip.h
+++ b/drivers/infiniband/hw/hfi1/chip.h
@@ -706,6 +706,7 @@ void handle_link_up(struct work_struct *work);
 void handle_link_down(struct work_struct *work);
 void handle_link_downgrade(struct work_struct *work);
 void handle_link_bounce(struct work_struct *work);
+void handle_start_link(struct work_struct *work);
 void handle_sma_message(struct work_struct *work);
 void reset_qsfp(struct hfi1_pportdata *ppd);
 void qsfp_event(struct work_struct *work);

diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h
index a021e660d482dd5e4cbd87ae1c010d25f2e1975f..28b91286798bf4d639e25514efb87cc9ea941eee 100644 (file)
--- a/drivers/infiniband/hw/hfi1/hfi.h
+++ b/drivers/infiniband/hw/hfi1/hfi.h
@@ -605,6 +605,7 @@ struct hfi1_pportdata {
        struct work_struct freeze_work;
        struct work_struct link_downgrade_work;
        struct work_struct link_bounce_work;
+       struct delayed_work start_link_work;
        /* host link state variables */
        struct mutex hls_lock;
        u32 host_link_state;
@@ -659,6 +660,7 @@ struct hfi1_pportdata {
        u8 linkinit_reason;
        u8 local_tx_rate;       /* rate given to 8051 firmware */
        u8 last_pstate;         /* info only */
+       u8 qsfp_retry_count;
 
        /* placeholders for IB MAD packet settings */
        u8 overrun_threshold;

diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c
index b7935451093c6d833112e985d13421b408268b32..000dc079bd88a6347832f8f07dc84e865ddc20e3 100644 (file)
--- a/drivers/infiniband/hw/hfi1/init.c
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -500,6 +500,7 @@ void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd,
        INIT_WORK(&ppd->link_downgrade_work, handle_link_downgrade);
        INIT_WORK(&ppd->sma_message_work, handle_sma_message);
        INIT_WORK(&ppd->link_bounce_work, handle_link_bounce);
+       INIT_DELAYED_WORK(&ppd->start_link_work, handle_start_link);
        INIT_WORK(&ppd->linkstate_active_work, receive_interrupt_work);
        INIT_WORK(&ppd->qsfp_info.qsfp_work, qsfp_event);