/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 4
#define IWL6050_UCODE_API_MAX 4
-#define IWL6000G2_UCODE_API_MAX 4
+#define IWL6000G2_UCODE_API_MAX 5
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
priv->cfg->ops->lib->temp_ops.set_calib_version(priv);
}
+/*
+ * Macros to access the lookup table.
+ *
+ * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req,
+ * wifi_prio, wifi_txrx and wifi_sh_ant_req.
+ *
+ * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH
+ *
+ * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits
+ * one after another in 32-bit registers, and "registers" 0 through 7 contain
+ * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order).
+ *
+ * These macros encode that format.
+ */
+#define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \
+ wifi_txrx, wifi_sh_ant_req) \
+ (bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \
+ (wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6))
+
+#define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \
+ lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f)))
+#define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ (!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx,\
+ bt_rf_act, wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
+#define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \
+ bt_rf_act, wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
+#define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \
+ bt_rf_act, wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
+
+#define LUT_WLAN_KILL_OP(lut, op, val) \
+ lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e)))
+#define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ (!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
+#define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
+#define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
+
+#define LUT_ANT_SWITCH_OP(lut, op, val) \
+ lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1)))
+#define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ (!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
+#define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
+#define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
+ wifi_prio, wifi_txrx, wifi_sh_ant_req) \
+ LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
+ wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
+
+static const __le32 iwl6000g2b_def_3w_lookup[12] = {
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xaeaaaaaa),
+ cpu_to_le32(0xaaaaaaaa),
+ cpu_to_le32(0xcc00ff28),
+ cpu_to_le32(0x0000aaaa),
+ cpu_to_le32(0xcc00aaaa),
+ cpu_to_le32(0x0000aaaa),
+ cpu_to_le32(0xc0004000),
+ cpu_to_le32(0x00004000),
+ cpu_to_le32(0xf0005000),
+ cpu_to_le32(0xf0004000),
+};
+
+static void iwl6000g2b_send_bt_config(struct iwl_priv *priv)
+{
+ struct iwl6000g2b_bt_cmd bt_cmd = {
+ .prio_boost = IWL6000G2B_BT_PRIO_BOOST_DEFAULT,
+ .max_kill = IWL6000G2B_BT_MAX_KILL_DEFAULT,
+ .bt3_timer_t7_value = IWL6000G2B_BT3_T7_DEFAULT,
+ .kill_ack_mask = IWL6000G2B_BT_KILL_ACK_MASK_DEFAULT,
+ .kill_cts_mask = IWL6000G2B_BT_KILL_CTS_MASK_DEFAULT,
+ .bt3_prio_sample_time = IWL6000G2B_BT3_PRIO_SAMPLE_DEFAULT,
+ .bt3_timer_t2_value = IWL6000G2B_BT3_T2_DEFAULT,
+ .valid = IWL6000G2B_BT_VALID_ENABLE_FLAGS,
+ };
+
+ BUILD_BUG_ON(sizeof(iwl6000g2b_def_3w_lookup) !=
+ sizeof(bt_cmd.bt3_lookup_table));
+
+ if (!bt_coex_active) {
+ bt_cmd.flags = 0;
+ } else {
+ bt_cmd.flags = IWL6000G2B_BT_FLAG_CHANNEL_INHIBITION |
+ IWL6000G2B_BT_FLAG_COEX_MODE_3W <<
+ IWL6000G2B_BT_FLAG_COEX_MODE_SHIFT;
+ bt_cmd.valid |= IWL6000G2B_BT_ALL_VALID_MSK;
+ }
+
+ memcpy(bt_cmd.bt3_lookup_table, iwl6000g2b_def_3w_lookup,
+ sizeof(iwl6000g2b_def_3w_lookup));
+
+ IWL_DEBUG_INFO(priv, "BT coex %s\n",
+ bt_cmd.flags ? "active" : "disabled");
+
+ if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd))
+ IWL_ERR(priv, "failed to send BT Coex Config\n");
+}
+
static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
.min_nrg_cck = 97,
.max_nrg_cck = 0, /* not used, set to 0 */
.led = &iwlagn_led_ops,
};
-static void do_not_send_bt_config(struct iwl_priv *priv)
-{
-}
-
static struct iwl_hcmd_ops iwl6000g2b_hcmd = {
.rxon_assoc = iwlagn_send_rxon_assoc,
.commit_rxon = iwl_commit_rxon,
.set_rxon_chain = iwl_set_rxon_chain,
.set_tx_ant = iwlagn_send_tx_ant_config,
- .send_bt_config = do_not_send_bt_config,
+ .send_bt_config = iwl6000g2b_send_bt_config,
};
static const struct iwl_ops iwl6000g2b_ops = {
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
};
struct iwl_cfg iwl6000g2b_2abg_cfg = {
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
};
struct iwl_cfg iwl6000g2b_2bgn_cfg = {
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
};
struct iwl_cfg iwl6000g2b_2bg_cfg = {
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
};
struct iwl_cfg iwl6000g2b_bgn_cfg = {
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
};
struct iwl_cfg iwl6000g2b_bg_cfg = {
.chain_noise_calib_by_driver = true,
.need_dc_calib = true,
.bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ .advanced_bt_coexist = true,
};
/*