IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
use the driver for a SDIO wireless card.
-config BRCMFMAC_SDIO_OOB
- bool "Out of band interrupt support for SDIO interface chipset"
- depends on BRCMFMAC_SDIO
- ---help---
- This option enables out-of-band interrupt support for Broadcom
- SDIO Wifi chipset using fullmac in order to gain better
- performance and deep sleep wake up capability on certain
- platforms. Say N if you are unsure.
-
config BRCMFMAC_USB
bool "USB bus interface support for FullMAC driver"
depends on USB
#include <linux/mmc/sdio.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/card.h>
+#include <linux/platform_data/brcmfmac-sdio.h>
#include <defs.h>
#include <brcm_hw_ids.h>
#define SDIOH_API_ACCESS_RETRY_LIMIT 2
-#ifdef CONFIG_BRCMFMAC_SDIO_OOB
-static irqreturn_t brcmf_sdio_irqhandler(int irq, void *dev_id)
+
+static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id)
{
struct brcmf_bus *bus_if = dev_get_drvdata(dev_id);
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
- brcmf_dbg(INTR, "oob intr triggered\n");
+ brcmf_dbg(INTR, "OOB intr triggered\n");
- /*
- * out-of-band interrupt is level-triggered which won't
+ /* out-of-band interrupt is level-triggered which won't
* be cleared until dpc
*/
if (sdiodev->irq_en) {
return IRQ_HANDLED;
}
-int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
-{
- int ret = 0;
- u8 data;
- unsigned long flags;
-
- brcmf_dbg(SDIO, "Entering: irq %d\n", sdiodev->irq);
-
- ret = request_irq(sdiodev->irq, brcmf_sdio_irqhandler,
- sdiodev->irq_flags, "brcmf_oob_intr",
- &sdiodev->func[1]->dev);
- if (ret != 0)
- return ret;
- spin_lock_init(&sdiodev->irq_en_lock);
- spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
- sdiodev->irq_en = true;
- spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
-
- ret = enable_irq_wake(sdiodev->irq);
- if (ret != 0)
- return ret;
- sdiodev->irq_wake = true;
-
- sdio_claim_host(sdiodev->func[1]);
-
- /* must configure SDIO_CCCR_IENx to enable irq */
- data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
- data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
- brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
-
- /* redirect, configure and enable io for interrupt signal */
- data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
- if (sdiodev->irq_flags & IRQF_TRIGGER_HIGH)
- data |= SDIO_SEPINT_ACT_HI;
- brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
-
- sdio_release_host(sdiodev->func[1]);
-
- return 0;
-}
-
-int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
-{
- brcmf_dbg(SDIO, "Entering\n");
-
- sdio_claim_host(sdiodev->func[1]);
- brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
- brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
- sdio_release_host(sdiodev->func[1]);
-
- if (sdiodev->irq_wake) {
- disable_irq_wake(sdiodev->irq);
- sdiodev->irq_wake = false;
- }
- free_irq(sdiodev->irq, &sdiodev->func[1]->dev);
- sdiodev->irq_en = false;
-
- return 0;
-}
-#else /* CONFIG_BRCMFMAC_SDIO_OOB */
-static void brcmf_sdio_irqhandler(struct sdio_func *func)
+static void brcmf_sdio_ib_irqhandler(struct sdio_func *func)
{
struct brcmf_bus *bus_if = dev_get_drvdata(&func->dev);
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
- brcmf_dbg(INTR, "ib intr triggered\n");
+ brcmf_dbg(INTR, "IB intr triggered\n");
brcmf_sdbrcm_isr(sdiodev->bus);
}
int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
{
- brcmf_dbg(SDIO, "Entering\n");
+ int ret = 0;
+ u8 data;
+ unsigned long flags;
- sdio_claim_host(sdiodev->func[1]);
- sdio_claim_irq(sdiodev->func[1], brcmf_sdio_irqhandler);
- sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler);
- sdio_release_host(sdiodev->func[1]);
+ if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
+ brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n",
+ sdiodev->pdata->oob_irq_nr);
+ ret = request_irq(sdiodev->pdata->oob_irq_nr,
+ brcmf_sdio_oob_irqhandler,
+ sdiodev->pdata->oob_irq_flags,
+ "brcmf_oob_intr",
+ &sdiodev->func[1]->dev);
+ if (ret != 0) {
+ brcmf_err("request_irq failed %d\n", ret);
+ return ret;
+ }
+ sdiodev->oob_irq_requested = true;
+ spin_lock_init(&sdiodev->irq_en_lock);
+ spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
+ sdiodev->irq_en = true;
+ spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
+
+ ret = enable_irq_wake(sdiodev->pdata->oob_irq_nr);
+ if (ret != 0) {
+ brcmf_err("enable_irq_wake failed %d\n", ret);
+ return ret;
+ }
+ sdiodev->irq_wake = true;
+
+ sdio_claim_host(sdiodev->func[1]);
+
+ /* must configure SDIO_CCCR_IENx to enable irq */
+ data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
+ data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
+ brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
+
+ /* redirect, configure and enable io for interrupt signal */
+ data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
+ if (sdiodev->pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
+ data |= SDIO_SEPINT_ACT_HI;
+ brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
+
+ sdio_release_host(sdiodev->func[1]);
+ } else {
+ brcmf_dbg(SDIO, "Entering\n");
+ sdio_claim_host(sdiodev->func[1]);
+ sdio_claim_irq(sdiodev->func[1], brcmf_sdio_ib_irqhandler);
+ sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler);
+ sdio_release_host(sdiodev->func[1]);
+ }
return 0;
}
{
brcmf_dbg(SDIO, "Entering\n");
- sdio_claim_host(sdiodev->func[1]);
- sdio_release_irq(sdiodev->func[2]);
- sdio_release_irq(sdiodev->func[1]);
- sdio_release_host(sdiodev->func[1]);
+ if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
+ sdio_claim_host(sdiodev->func[1]);
+ brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
+ brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
+ sdio_release_host(sdiodev->func[1]);
+
+ if (sdiodev->oob_irq_requested) {
+ sdiodev->oob_irq_requested = false;
+ if (sdiodev->irq_wake) {
+ disable_irq_wake(sdiodev->pdata->oob_irq_nr);
+ sdiodev->irq_wake = false;
+ }
+ free_irq(sdiodev->pdata->oob_irq_nr,
+ &sdiodev->func[1]->dev);
+ sdiodev->irq_en = false;
+ }
+ } else {
+ sdio_claim_host(sdiodev->func[1]);
+ sdio_release_irq(sdiodev->func[2]);
+ sdio_release_irq(sdiodev->func[1]);
+ sdio_release_host(sdiodev->func[1]);
+ }
return 0;
}
-#endif /* CONFIG_BRCMFMAC_SDIO_OOB */
int
brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
#include <linux/sched.h> /* request_irq() */
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/brcmfmac-sdio.h>
#include <net/cfg80211.h>
#include <defs.h>
};
MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
-#ifdef CONFIG_BRCMFMAC_SDIO_OOB
-static struct list_head oobirq_lh;
-struct brcmf_sdio_oobirq {
- unsigned int irq;
- unsigned long flags;
- struct list_head list;
-};
-#endif /* CONFIG_BRCMFMAC_SDIO_OOB */
+static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
+
static bool
brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
}
-#ifdef CONFIG_BRCMFMAC_SDIO_OOB
-static int brcmf_sdio_getintrcfg(struct brcmf_sdio_dev *sdiodev)
-{
- struct brcmf_sdio_oobirq *oobirq_entry;
-
- if (list_empty(&oobirq_lh)) {
- brcmf_err("no valid oob irq resource\n");
- return -ENXIO;
- }
-
- oobirq_entry = list_first_entry(&oobirq_lh, struct brcmf_sdio_oobirq,
- list);
-
- sdiodev->irq = oobirq_entry->irq;
- sdiodev->irq_flags = oobirq_entry->flags;
- list_del(&oobirq_entry->list);
- kfree(oobirq_entry);
-
- return 0;
-}
-#else
-static inline int brcmf_sdio_getintrcfg(struct brcmf_sdio_dev *sdiodev)
-{
- return 0;
-}
-#endif /* CONFIG_BRCMFMAC_SDIO_OOB */
-
static int brcmf_ops_sdio_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
dev_set_drvdata(&func->dev, bus_if);
dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
sdiodev->dev = &sdiodev->func[1]->dev;
+ sdiodev->pdata = brcmfmac_sdio_pdata;
atomic_set(&sdiodev->suspend, false);
init_waitqueue_head(&sdiodev->request_byte_wait);
init_waitqueue_head(&sdiodev->request_word_wait);
init_waitqueue_head(&sdiodev->request_chain_wait);
init_waitqueue_head(&sdiodev->request_buffer_wait);
- err = brcmf_sdio_getintrcfg(sdiodev);
- if (err)
- goto fail;
brcmf_dbg(SDIO, "F2 found, calling brcmf_sdio_probe...\n");
err = brcmf_sdio_probe(sdiodev);
static struct sdio_driver brcmf_sdmmc_driver = {
.probe = brcmf_ops_sdio_probe,
.remove = brcmf_ops_sdio_remove,
- .name = "brcmfmac",
+ .name = BRCMFMAC_SDIO_PDATA_NAME,
.id_table = brcmf_sdmmc_ids,
#ifdef CONFIG_PM_SLEEP
.drv = {
#endif /* CONFIG_PM_SLEEP */
};
-#ifdef CONFIG_BRCMFMAC_SDIO_OOB
static int brcmf_sdio_pd_probe(struct platform_device *pdev)
{
- struct resource *res;
- struct brcmf_sdio_oobirq *oobirq_entry;
- int i, ret;
+ int ret;
- INIT_LIST_HEAD(&oobirq_lh);
+ brcmf_dbg(SDIO, "Enter\n");
- for (i = 0; ; i++) {
- res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
- if (!res)
- break;
+ brcmfmac_sdio_pdata = pdev->dev.platform_data;
- oobirq_entry = kzalloc(sizeof(struct brcmf_sdio_oobirq),
- GFP_KERNEL);
- if (!oobirq_entry)
- return -ENOMEM;
- oobirq_entry->irq = res->start;
- oobirq_entry->flags = res->flags & IRQF_TRIGGER_MASK;
- list_add_tail(&oobirq_entry->list, &oobirq_lh);
- }
- if (i == 0)
- return -ENXIO;
+ if (brcmfmac_sdio_pdata->power_on)
+ brcmfmac_sdio_pdata->power_on();
ret = sdio_register_driver(&brcmf_sdmmc_driver);
-
if (ret)
brcmf_err("sdio_register_driver failed: %d\n", ret);
return ret;
}
-static struct platform_driver brcmf_sdio_pd = {
- .probe = brcmf_sdio_pd_probe,
- .driver = {
- .name = "brcmf_sdio_pd"
- }
-};
-
-void brcmf_sdio_exit(void)
+static int brcmf_sdio_pd_remove(struct platform_device *pdev)
{
brcmf_dbg(SDIO, "Enter\n");
+ if (brcmfmac_sdio_pdata->power_off)
+ brcmfmac_sdio_pdata->power_off();
+
sdio_unregister_driver(&brcmf_sdmmc_driver);
- platform_driver_unregister(&brcmf_sdio_pd);
+ return 0;
}
-void brcmf_sdio_init(void)
-{
- int ret;
-
- brcmf_dbg(SDIO, "Enter\n");
-
- ret = platform_driver_register(&brcmf_sdio_pd);
+static struct platform_driver brcmf_sdio_pd = {
+ .remove = brcmf_sdio_pd_remove,
+ .driver = {
+ .name = BRCMFMAC_SDIO_PDATA_NAME
+ }
+};
- if (ret)
- brcmf_err("platform_driver_register failed: %d\n", ret);
-}
-#else
void brcmf_sdio_exit(void)
{
brcmf_dbg(SDIO, "Enter\n");
- sdio_unregister_driver(&brcmf_sdmmc_driver);
+ if (brcmfmac_sdio_pdata)
+ platform_driver_unregister(&brcmf_sdio_pd);
+ else
+ sdio_unregister_driver(&brcmf_sdmmc_driver);
}
void brcmf_sdio_init(void)
brcmf_dbg(SDIO, "Enter\n");
- ret = sdio_register_driver(&brcmf_sdmmc_driver);
+ ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe);
+ if (ret == -ENODEV) {
+ brcmf_dbg(SDIO, "No platform data available, registering without.\n");
+ ret = sdio_register_driver(&brcmf_sdmmc_driver);
+ }
if (ret)
- brcmf_err("sdio_register_driver failed: %d\n", ret);
+ brcmf_err("driver registration failed: %d\n", ret);
}
-#endif /* CONFIG_BRCMFMAC_SDIO_OOB */
#include <linux/bcma/bcma.h>
#include <linux/debugfs.h>
#include <linux/vmalloc.h>
+#include <linux/platform_data/brcmfmac-sdio.h>
#include <asm/unaligned.h>
#include <defs.h>
#include <brcmu_wifi.h>
static int tx_packets[NUMPRIO];
#endif /* DEBUG */
-#define SDIO_DRIVE_STRENGTH 6 /* in milliamps */
+#define DEFAULT_SDIO_DRIVE_STRENGTH 6 /* in milliamps */
#define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL)
bus->tx_seq = bus->rx_seq = 0;
}
-#ifdef CONFIG_BRCMFMAC_SDIO_OOB
static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
{
unsigned long flags;
- spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags);
- if (!bus->sdiodev->irq_en && !atomic_read(&bus->ipend)) {
- enable_irq(bus->sdiodev->irq);
- bus->sdiodev->irq_en = true;
+ if (bus->sdiodev->oob_irq_requested) {
+ spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags);
+ if (!bus->sdiodev->irq_en && !atomic_read(&bus->ipend)) {
+ enable_irq(bus->sdiodev->pdata->oob_irq_nr);
+ bus->sdiodev->irq_en = true;
+ }
+ spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags);
}
- spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags);
-}
-#else
-static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
-{
}
-#endif /* CONFIG_BRCMFMAC_SDIO_OOB */
static inline void brcmf_sdbrcm_adddpctsk(struct brcmf_sdio *bus)
{
int err = 0;
int reg_addr;
u32 reg_val;
+ u32 drivestrength;
bus->alp_only = true;
goto fail;
}
- brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci,
- SDIO_DRIVE_STRENGTH);
+ if ((bus->sdiodev->pdata) && (bus->sdiodev->pdata->drive_strength))
+ drivestrength = bus->sdiodev->pdata->drive_strength;
+ else
+ drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
+ brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
/* Get info on the SOCRAM cores... */
bus->ramsize = bus->ci->ramsize;
wait_queue_head_t request_buffer_wait;
struct device *dev;
struct brcmf_bus *bus_if;
-#ifdef CONFIG_BRCMFMAC_SDIO_OOB
- unsigned int irq; /* oob interrupt number */
- unsigned long irq_flags; /* board specific oob flags */
+ struct brcmfmac_sdio_platform_data *pdata;
+ bool oob_irq_requested;
bool irq_en; /* irq enable flags */
spinlock_t irq_en_lock;
bool irq_wake; /* irq wake enable flags */
-#endif /* CONFIG_BRCMFMAC_SDIO_OOB */
};
/* Register/deregister interrupt handler. */
--- /dev/null
+/*
+ * Copyright (c) 2013 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_BRCMFMAC_PLATFORM_H
+#define _LINUX_BRCMFMAC_PLATFORM_H
+
+/*
+ * Platform specific driver functions and data. Through the platform specific
+ * device data functions can be provided to help the brcmfmac driver to
+ * operate with the device in combination with the used platform.
+ *
+ * Use the platform data in the following (similar) way:
+ *
+ *
+#include <brcmfmac_platform.h>
+
+
+static void brcmfmac_power_on(void)
+{
+}
+
+static void brcmfmac_power_off(void)
+{
+}
+
+static void brcmfmac_reset(void)
+{
+}
+
+static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = {
+ .power_on = brcmfmac_power_on,
+ .power_off = brcmfmac_power_off,
+ .reset = brcmfmac_reset
+};
+
+static struct platform_device brcmfmac_device = {
+ .name = BRCMFMAC_SDIO_PDATA_NAME,
+ .id = PLATFORM_DEVID_NONE,
+ .dev.platform_data = &brcmfmac_sdio_pdata
+};
+
+void __init brcmfmac_init_pdata(void)
+{
+ brcmfmac_sdio_pdata.oob_irq_supported = true;
+ brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB);
+ brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHLEVEL;
+ platform_device_register(&brcmfmac_device);
+}
+ *
+ *
+ * Note: the brcmfmac can be loaded as module or be statically built-in into
+ * the kernel. If built-in then do note that it uses module_init (and
+ * module_exit) routines which equal device_initcall. So if you intend to
+ * create a module with the platform specific data for the brcmfmac and have
+ * it built-in to the kernel then use a higher initcall then device_initcall
+ * (see init.h). If this is not done then brcmfmac will load without problems
+ * but will not pickup the platform data.
+ *
+ * When the driver does not "detect" platform driver data then it will continue
+ * without reporting anything and just assume there is no data needed. Which is
+ * probably true for most platforms.
+ *
+ * Explanation of the platform_data fields:
+ *
+ * drive_strength: is the preferred drive_strength to be used for the SDIO
+ * pins. If 0 then a default value will be used. This is the target drive
+ * strength, the exact drive strength which will be used depends on the
+ * capabilities of the device.
+ *
+ * oob_irq_supported: does the board have support for OOB interrupts. SDIO
+ * in-band interrupts are relatively slow and for having less overhead on
+ * interrupt processing an out of band interrupt can be used. If the HW
+ * supports this then enable this by setting this field to true and configure
+ * the oob related fields.
+ *
+ * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are
+ * used for registering the irq using request_irq function.
+ *
+ * power_on: This function is called by the brcmfmac when the module gets
+ * loaded. This can be particularly useful for low power devices. The platform
+ * spcific routine may for example decide to power up the complete device.
+ * If there is no use-case for this function then provide NULL.
+ *
+ * power_off: This function is called by the brcmfmac when the module gets
+ * unloaded. At this point the device can be powered down or otherwise be reset.
+ * So if an actual power_off is not supported but reset is then reset the device
+ * when this function gets called. This can be particularly useful for low power
+ * devices. If there is no use-case for this function (either power-down or
+ * reset) then provide NULL.
+ *
+ * reset: This function can get called if the device communication broke down.
+ * This functionality is particularly useful in case of SDIO type devices. It is
+ * possible to reset a dongle via sdio data interface, but it requires that
+ * this is fully functional. This function is chip/module specific and this
+ * function should return only after the complete reset has completed.
+ */
+
+#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio"
+
+struct brcmfmac_sdio_platform_data {
+ unsigned int drive_strength;
+ bool oob_irq_supported;
+ unsigned int oob_irq_nr;
+ unsigned long oob_irq_flags;
+ void (*power_on)(void);
+ void (*power_off)(void);
+ void (*reset)(void);
+};
+
+#endif /* _LINUX_BRCMFMAC_PLATFORM_H */
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff