--- /dev/null
+/*
+ * CPU frequency scaling for DaVinci
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Updated to support OMAP3
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/cpufreq.h>
+#include <mach/common.h>
+
+#include "clock.h"
+
+struct davinci_cpufreq {
+ struct device *dev;
+ struct clk *armclk;
+};
+static struct davinci_cpufreq cpufreq;
+
+static int davinci_verify_speed(struct cpufreq_policy *policy)
+{
+ struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+ struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+ struct clk *armclk = cpufreq.armclk;
+
+ if (freq_table)
+ return cpufreq_frequency_table_verify(policy, freq_table);
+
+ if (policy->cpu)
+ return -EINVAL;
+
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
+
+ policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
+ policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
+ return 0;
+}
+
+static unsigned int davinci_getspeed(unsigned int cpu)
+{
+ if (cpu)
+ return 0;
+
+ return clk_get_rate(cpufreq.armclk) / 1000;
+}
+
+static int davinci_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ int ret = 0;
+ unsigned int idx;
+ struct cpufreq_freqs freqs;
+ struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+ struct clk *armclk = cpufreq.armclk;
+
+ /*
+ * Ensure desired rate is within allowed range. Some govenors
+ * (ondemand) will just pass target_freq=0 to get the minimum.
+ */
+ if (target_freq < policy->cpuinfo.min_freq)
+ target_freq = policy->cpuinfo.min_freq;
+ if (target_freq > policy->cpuinfo.max_freq)
+ target_freq = policy->cpuinfo.max_freq;
+
+ freqs.old = davinci_getspeed(0);
+ freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
+ freqs.cpu = 0;
+
+ if (freqs.old == freqs.new)
+ return ret;
+
+ cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER,
+ dev_driver_string(cpufreq.dev),
+ "transition: %u --> %u\n", freqs.old, freqs.new);
+
+ ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
+ freqs.new, relation, &idx);
+ if (ret)
+ return -EINVAL;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* if moving to higher frequency, up the voltage beforehand */
+ if (pdata->set_voltage && freqs.new > freqs.old)
+ pdata->set_voltage(idx);
+
+ ret = clk_set_rate(armclk, idx);
+
+ /* if moving to lower freq, lower the voltage after lowering freq */
+ if (pdata->set_voltage && freqs.new < freqs.old)
+ pdata->set_voltage(idx);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return ret;
+}
+
+static int __init davinci_cpu_init(struct cpufreq_policy *policy)
+{
+ int result = 0;
+ struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+ struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->cur = policy->min = policy->max = davinci_getspeed(0);
+
+ if (freq_table) {
+ result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ if (!result)
+ cpufreq_frequency_table_get_attr(freq_table,
+ policy->cpu);
+ } else {
+ policy->cpuinfo.min_freq = policy->min;
+ policy->cpuinfo.max_freq = policy->max;
+ }
+
+ policy->min = policy->cpuinfo.min_freq;
+ policy->max = policy->cpuinfo.max_freq;
+ policy->cur = davinci_getspeed(0);
+
+ /*
+ * Time measurement across the target() function yields ~1500-1800us
+ * time taken with no drivers on notification list.
+ * Setting the latency to 2000 us to accomodate addition of drivers
+ * to pre/post change notification list.
+ */
+ policy->cpuinfo.transition_latency = 2000 * 1000;
+ return 0;
+}
+
+static int davinci_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static struct freq_attr *davinci_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver davinci_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = davinci_verify_speed,
+ .target = davinci_target,
+ .get = davinci_getspeed,
+ .init = davinci_cpu_init,
+ .exit = davinci_cpu_exit,
+ .name = "davinci",
+ .attr = davinci_cpufreq_attr,
+};
+
+static int __init davinci_cpufreq_probe(struct platform_device *pdev)
+{
+ struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
+
+ if (!pdata)
+ return -EINVAL;
+ if (!pdata->freq_table)
+ return -EINVAL;
+
+ cpufreq.dev = &pdev->dev;
+
+ cpufreq.armclk = clk_get(NULL, "arm");
+ if (IS_ERR(cpufreq.armclk)) {
+ dev_err(cpufreq.dev, "Unable to get ARM clock\n");
+ return PTR_ERR(cpufreq.armclk);
+ }
+
+ return cpufreq_register_driver(&davinci_driver);
+}
+
+static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
+{
+ clk_put(cpufreq.armclk);
+
+ return cpufreq_unregister_driver(&davinci_driver);
+}
+
+static struct platform_driver davinci_cpufreq_driver = {
+ .driver = {
+ .name = "cpufreq-davinci",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(davinci_cpufreq_remove),
+};
+
+static int __init davinci_cpufreq_init(void)
+{
+ return platform_driver_probe(&davinci_cpufreq_driver,
+ davinci_cpufreq_probe);
+}
+late_initcall(davinci_cpufreq_init);
+
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff